WebSVN – HelenOS – Diff – /branches/network/uspace/srv/net/il/arp/arp.c


/*
 * Copyright (c) 2009 Lukas Mejdrech
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/** @addtogroup arp
 *  @{
 */
 
/** @file
 *  ARP module implementation.
 *  @see arp.h
 */
 
#include <async.h>
#include <malloc.h>
#include <mem.h>
#include <fibril_sync.h>
#include <stdio.h>
#include <string.h>
#include <task.h>
 
#include <ipc/ipc.h>
#include <ipc/services.h>
 
#include "../../err.h"
#include "../../messages.h"
#include "../../modules.h"
 
#include "../../include/byteorder.h"
#include "../../include/device.h"
#include "../../include/arp_interface.h"
#include "../../include/nil_interface.h"
#include "../../include/protocol_map.h"
 
#include "../../structures/measured_strings.h"
#include "../../structures/packet/packet.h"
#include "../../structures/packet/packet_client.h"
 
#include "../il_messages.h"
 
#include "arp.h"
#include "arp_header.h"
#include "arp_oc.h"
#include "arp_module.h"
#include "arp_messages.h"
 
/** ARP global data.
 */
arp_globals_t   arp_globals;
 
/** Creates new protocol specific data.
 *  @param proto Protocol specific data. Output parameter.
 *  @param service Protocol module service. Input parameter.
 *  @param address Actual protocol device address. Input parameter.
 *  @returns EOK on success.
 *  @returns ENOMEM if there is not enough memory left.
 */
int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address );
 
/** Clears the device specific data.
 *  @param device The device specific data.
 */
void    clear_device( arp_device_ref device );
 
/** @name Message processing functions
 */
/*@{*/
 
/** Registers the device.
 *  Creates new device entry in the cache or updates the protocol address if the device with the device identifier and the driver service exists.
 *  @param device_id The device identifier. Input parameter.
 *  @param service The device driver service. Input parameter.
 *  @param protocol The protocol service. Input parameter.
 *  @param address The actual device protocol address.
 *  @returns EOK on success.
 *  @returns EEXIST if another device with the same device identifier and different driver service exists.
 *  @returns ENOMEM if there is not enough memory left.
 *  @returns Other error codes as defined for the measured_strings_return() function.
 */
int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address );
 
/** Returns the hardware address for the given protocol address.
 *  Sends the ARP request packet if the hardware address is not found in the cache.
 *  @param device_id The device identifier. Input parameter.
 *  @param protocol The protocol service. Input parameter.
 *  @param target The target protocol address. Input parameter.
 *  @returns The hardware address of the target.
 *  @returns NULL if the target parameter is NULL.
 *  @returns NULL if the device is not found.
 *  @returns NULL if the device packet is too small to send a&nbsp;request.
 *  @returns NULL if the hardware address is not found in the cache.
 */
measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target );
 
/** Processes the received ARP packet.
 *  Updates the source hardware address if the source entry exists or the packet is targeted to my protocol address.
 *  Responses to the ARP request if the packet is the ARP request and is targeted to my address.
 *  @param device_id The source device identifier. Input parameter.
 *  @param packet The received packet. Input/output parameter.
 *  @returns EOK on success and the packet is no longer needed.
 *  @returns 1 on success and the packet has been reused.
 *  @returns EINVAL if the packet is too small to carry an ARP packet.
 *  @returns EINVAL if the received address lengths differs from the registered values.
 *  @returns ENOENT if the device is not found in the cache.
 *  @returns ENOENT if the protocol for the device is not found in the cache.
 *  @returns ENOMEM if there is not enough memory left.
 */
int arp_receive_message( device_id_t device_id, packet_t packet );
 
/** Updates the device content length according to the new MTU value.
 *  @param device_id The device identifier. Input parameter.
 *  @param mtu The new mtu value. Input parameter.
 *  @returns ENOENT if device is not found.
 *  @returns EOK on success.
 */
int arp_mtu_changed_message( device_id_t device_id, size_t mtu );
 
/*@}*/
 
DEVICE_MAP_IMPLEMENT( arp_cache, arp_device_t )
 
INT_MAP_IMPLEMENT( arp_protos, arp_proto_t )
 
GENERIC_CHAR_MAP_IMPLEMENT( arp_addr, measured_string_t )
 
task_id_t arp_task_get_id( void ){
    return task_get_id();
}
 
int arp_clear_device_req( int arp_phone, device_id_t device_id ){
    arp_device_ref  device;
 
    fibril_rwlock_write_lock( & arp_globals.lock );
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( ! device ){
        fibril_rwlock_write_unlock( & arp_globals.lock );
        return ENOENT;
    }
    clear_device( device );
    printf( "Device %d cleared\n", device_id );
    fibril_rwlock_write_unlock( & arp_globals.lock );
    return EOK;
}
 
int arp_clear_address_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address ){
    arp_device_ref  device;
    arp_proto_ref   proto;
 
    fibril_rwlock_write_lock( & arp_globals.lock );
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( ! device ){
        fibril_rwlock_write_unlock( & arp_globals.lock );
        return ENOENT;
    }
    proto = arp_protos_find( & device->protos, protocol );
    if( ! proto ){
        fibril_rwlock_write_unlock( & arp_globals.lock );
        return ENOENT;
    }
    arp_addr_exclude( & proto->addresses, address->value, address->length );
    fibril_rwlock_write_unlock( & arp_globals.lock );
    return EOK;
}
 
int arp_clean_cache_req( int arp_phone ){
    int             count;
    arp_device_ref  device;
 
    fibril_rwlock_write_lock( & arp_globals.lock );
    for( count = arp_cache_count( & arp_globals.cache ) - 1; count >= 0; -- count ){
        device = arp_cache_get_index( & arp_globals.cache, count );
        if( device ){
            clear_device( device );
            if( device->addr_data ) free( device->addr_data );
            if( device->broadcast_data ) free( device->broadcast_data );
        }
    }
    arp_cache_clear( & arp_globals.cache );
    fibril_rwlock_write_unlock( & arp_globals.lock );
    printf( "Cache cleaned\n" );
    return EOK;
}
 
int arp_device_req( int arp_phone, device_id_t device_id, services_t protocol, services_t netif, measured_string_ref address ){
    ERROR_DECLARE;
 
    measured_string_ref tmp;
 
    tmp = measured_string_copy( address );
    if( ERROR_OCCURRED( arp_device_message( device_id, netif, protocol, tmp ))){
        free( tmp->value );
        free( tmp );
    }
    return ERROR_CODE;
}
 
int arp_translate_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address, measured_string_ref * translation, char ** data ){
    measured_string_ref tmp;
 
    fibril_rwlock_read_lock( & arp_globals.lock );
    tmp = arp_translate_message( device_id, protocol, address );
    if( tmp ){
        * translation = measured_string_copy( tmp );
        fibril_rwlock_read_unlock( & arp_globals.lock );
        if( * translation ){
            * data = ( ** translation ).value;
            return EOK;
        }else{
            return ENOMEM;
        }
    }else{
        fibril_rwlock_read_unlock( & arp_globals.lock );
        return ENOENT;
    }
}
 
int arp_initialize( async_client_conn_t client_connection ){
    ERROR_DECLARE;
 
    fibril_rwlock_initialize( & arp_globals.lock );
    fibril_rwlock_write_lock( & arp_globals.lock );
    arp_globals.client_connection = client_connection;
    ERROR_PROPAGATE( arp_cache_initialize( & arp_globals.cache ));
    fibril_rwlock_write_unlock( & arp_globals.lock );
    return EOK;
}
 
int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address ){
    ERROR_DECLARE;
 
    * proto = ( arp_proto_ref ) malloc( sizeof( arp_proto_t ));
    if( !( * proto )) return ENOMEM;
    ( ** proto ).service = service;
    ( ** proto ).addr = address;
    ( ** proto ).addr_data = address->value;
    if( ERROR_OCCURRED( arp_addr_initialize( &( ** proto).addresses ))){
        free( * proto );
        return ERROR_CODE;
    }
    return EOK;
}
 
int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address ){
    ERROR_DECLARE;
 
    arp_device_ref  device;
    arp_proto_ref   proto;
    int             index;
    hw_type_t       hardware;
 
    fibril_rwlock_write_lock( & arp_globals.lock );
    // an existing device?
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( device ){
        if( device->service != service ){
            printf( "Device %d already exists\n", device->device_id );
            fibril_rwlock_write_unlock( & arp_globals.lock );
            return EEXIST;
        }
        proto = arp_protos_find( & device->protos, protocol );
        if( proto ){
            free( proto->addr );
            free( proto->addr_data );
            proto->addr = address;
            proto->addr_data = address->value;
        }else{
            if( ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
                fibril_rwlock_write_unlock( & arp_globals.lock );
                return ERROR_CODE;
            }
            index = arp_protos_add( & device->protos, proto->service, proto );
            if( index < 0 ){
                fibril_rwlock_write_unlock( & arp_globals.lock );
                free( proto );
                return index;
            }
            printf( "New protocol added:\n\tdevice id\t= %d\n\tproto\t= %d", device_id, protocol );
        }
    }else{
        hardware = hardware_map( service );
        if( ! hardware ) return ENOENT;
        // create a new device
        device = ( arp_device_ref ) malloc( sizeof( arp_device_t ));
        if( ! device ){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            return ENOMEM;
        }
        device->hardware = hardware;
        device->device_id = device_id;
        if( ERROR_OCCURRED( arp_protos_initialize( & device->protos ))
        || ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            free( device );
            return ERROR_CODE;
        }
        index = arp_protos_add( & device->protos, proto->service, proto );
        if( index < 0 ){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            arp_protos_destroy( & device->protos );
            free( device );
            return index;
        }
        device->service = service;
        // bind the new one
        device->phone = bind_service( device->service, ( ipcarg_t ) device->device_id, SERVICE_ARP, 0, arp_globals.client_connection );
        if( device->phone < 0 ){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            arp_protos_destroy( & device->protos );
            free( device );
            return EREFUSED;
        }
        // get packet dimensions
        if( ERROR_OCCURRED( nil_packet_size_req( device->phone, device_id, & device->addr_len, & device->prefix, & device->content, & device->suffix ))){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            arp_protos_destroy( & device->protos );
            free( device );
            return ERROR_CODE;
        }
        // get hardware address
        if( ERROR_OCCURRED( nil_get_addr( device->phone, device_id, & device->addr, & device->addr_data ))){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            arp_protos_destroy( & device->protos );
            free( device );
            return ERROR_CODE;
        }
        // get broadcast address
        if( ERROR_OCCURRED( nil_get_broadcast_addr( device->phone, device_id, & device->broadcast_addr, & device->broadcast_data ))){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            free( device->addr );
            free( device->addr_data );
            arp_protos_destroy( & device->protos );
            free( device );
            return ERROR_CODE;
        }
        if( ERROR_OCCURRED( arp_cache_add( & arp_globals.cache, device->device_id, device ))){
            fibril_rwlock_write_unlock( & arp_globals.lock );
            free( device->addr );
            free( device->addr_data );
            free( device->broadcast_addr );
            free( device->broadcast_data );
            arp_protos_destroy( & device->protos );
            free( device );
            return ERROR_CODE;
        }
        printf( "New device registered:\n\tid\t= %d\n\ttype\t= 0x%x\n\tservice\t= %d\n\tproto\t= %d\n", device->device_id, device->hardware, device->service, protocol );
    }
    fibril_rwlock_write_unlock( & arp_globals.lock );
    return EOK;
}
 
measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target ){
    arp_device_ref      device;
    arp_proto_ref       proto;
    measured_string_ref addr;
    size_t              length;
    packet_t            packet;
    arp_header_ref      header;
 
    if( ! target ) return NULL;
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( ! device ) return NULL;
    proto = arp_protos_find( & device->protos, protocol );
    if(( ! proto ) || ( proto->addr->length != target->length )) return NULL;
    addr = arp_addr_find( & proto->addresses, target->value, target->length );
    if( addr ) return addr;
    // ARP packet content size = header + ( address + translation ) * 2
    length = 8 + ( CONVERT_SIZE( char, uint8_t, proto->addr->length ) + CONVERT_SIZE( char, uint8_t, device->addr->length )) * 2;
    if( length > device->content ) return NULL;
    packet = packet_get_4( arp_globals.net_phone, device->addr_len, device->prefix, length, device->suffix );
    if( ! packet ) return NULL;
    header = ( arp_header_ref ) packet_suffix( packet, length );
    if( ! header ){
        pq_release( arp_globals.net_phone, packet_get_id( packet ));
        return NULL;
    }
    header->hardware = htons( device->hardware );
    header->hardware_length = ( uint8_t ) device->addr->length;
    header->protocol = htons( protocol_map( device->service, protocol ));
    header->protocol_length = ( uint8_t ) proto->addr->length;
    header->operation = htons( ARPOP_REQUEST );
    length = sizeof( arp_header_t );
    memcpy((( uint8_t * ) header ) + length, device->addr->value, device->addr->length );
    length += device->addr->length;
    memcpy((( uint8_t * ) header ) + length, proto->addr->value, proto->addr->length );
    length += proto->addr->length;
    bzero((( uint8_t * ) header ) + length, device->addr->length );
    length += device->addr->length;
    memcpy((( uint8_t * ) header ) + length, target->value, target->length );
    if( packet_set_addr( packet, ( uint8_t * ) device->addr->value, ( uint8_t * ) device->broadcast_addr->value, CONVERT_SIZE( char, uint8_t, device->addr->length )) != EOK ){
        pq_release( arp_globals.net_phone, packet_get_id( packet ));
        return NULL;
    }
    nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
    return NULL;
}
 
int arp_receive_message( device_id_t device_id, packet_t packet ){
    ERROR_DECLARE;
 
    size_t              length;
    arp_header_ref      header;
    arp_device_ref      device;
    arp_proto_ref       proto;
    measured_string_ref hw_source;
    uint8_t *           src_hw;
    uint8_t *           src_proto;
    uint8_t *           des_hw;
    uint8_t *           des_proto;
 
    length = packet_get_data_length( packet );
    if( length <= sizeof( arp_header_t )) return EINVAL;
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( ! device ) return ENOENT;
    header = ( arp_header_ref ) packet_get_data( packet );
    if(( ntohs( header->hardware ) != device->hardware )
 
    || ( length < sizeof( arp_header_t ) + header->hardware_length * 2u + header->protocol_length * 2u )){
        return EINVAL;
    }
    proto = arp_protos_find( & device->protos, protocol_unmap( device->service, ntohs( header->protocol )));
    if( ! proto ) return ENOENT;
    src_hw = (( uint8_t * ) header ) + sizeof( arp_header_t );
    src_proto = src_hw + header->hardware_length;
    des_hw = src_proto + header->protocol_length;
    des_proto = des_hw + header->hardware_length;
    hw_source = arp_addr_find( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ));
    // exists?
    if( hw_source ){
        if( hw_source->length != CONVERT_SIZE( uint8_t, char, header->hardware_length )){
            return EINVAL;
        }
        memcpy( hw_source->value, src_hw, hw_source->length );
    }
    // is my protocol address?
    if( proto->addr->length != CONVERT_SIZE( uint8_t, char, header->protocol_length )){
        return EINVAL;
    }
    if( ! str_lcmp( proto->addr->value, ( char * ) des_proto, proto->addr->length )){
        // not already upadted?
        if( ! hw_source ){
            hw_source = measured_string_create_bulk(( char * ) src_hw, CONVERT_SIZE( uint8_t, char, header->hardware_length ));
            if( ! hw_source ) return ENOMEM;
            ERROR_PROPAGATE( arp_addr_add( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ), hw_source ));
        }
        if( ntohs( header->operation ) == ARPOP_REQUEST ){
            header->operation = htons( ARPOP_REPLY );
            memcpy( des_proto, src_proto, header->protocol_length );
            memcpy( src_proto, proto->addr->value, header->protocol_length );
            memcpy( src_hw, device->addr->value, device->addr_len );
            memcpy( des_hw, hw_source->value, header->hardware_length );
            ERROR_PROPAGATE( packet_set_addr( packet, src_hw, des_hw, header->hardware_length ));
            nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
            return 1;
        }
    }
    return EOK;
}
 
void clear_device( arp_device_ref device ){
    int             count;
    arp_proto_ref   proto;
 
    for( count = arp_protos_count( & device->protos ) - 1; count >= 0; -- count ){
        proto = arp_protos_get_index( & device->protos, count );
        if( proto ){
            if( proto->addr ) free( proto->addr );
            if( proto->addr_data ) free( proto->addr_data );
            arp_addr_destroy( & proto->addresses );
        }
    }
    arp_protos_clear( & device->protos );
}
 
int arp_connect_module( services_t service ){
    if( service != SERVICE_ARP ) return EINVAL;
    return EOK;
}
 
int arp_mtu_changed_message( device_id_t device_id, size_t mtu ){
    arp_device_ref  device;
 
    fibril_rwlock_write_lock( & arp_globals.lock );
    device = arp_cache_find( & arp_globals.cache, device_id );
    if( ! device ){
        fibril_rwlock_write_unlock( & arp_globals.lock );
        return ENOENT;
    }
    device->content = mtu;
    printf( "arp - device %d changed mtu to %d\n\n", device_id, mtu );
    fibril_rwlock_write_unlock( & arp_globals.lock );
    return EOK;
}
 
int arp_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
    ERROR_DECLARE;
 
    measured_string_ref address;
    measured_string_ref translation;
    char *              data;
    packet_t            packet;
    packet_t            next;
 
//  printf( "message %d - %d\n", IPC_GET_METHOD( * call ), NET_ARP_FIRST );
    * answer_count = 0;
    switch( IPC_GET_METHOD( * call )){
        case IPC_M_PHONE_HUNGUP:
            return EOK;
        case NET_ARP_DEVICE:
            ERROR_PROPAGATE( measured_strings_receive( & address, & data, 1 ));
            if( ERROR_OCCURRED( arp_device_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), ARP_GET_NETIF( call ), address ))){
                free( address );
                free( data );
            }
            return ERROR_CODE;
        case NET_ARP_TRANSLATE:
            ERROR_PROPAGATE( measured_strings_receive( & address, & data, 1 ));
            fibril_rwlock_read_lock( & arp_globals.lock );
            translation = arp_translate_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), address );
            free( address );
            free( data );
            if( ! translation ){
                fibril_rwlock_read_unlock( & arp_globals.lock );
                return ENOENT;
            }
            ERROR_CODE = measured_strings_reply( translation, 1 );
            fibril_rwlock_read_unlock( & arp_globals.lock );
            return ERROR_CODE;
        case NET_ARP_CLEAR_DEVICE:
            return arp_clear_device_req( 0, IPC_GET_DEVICE( call ));
        case NET_ARP_CLEAR_ADDRESS:
            ERROR_PROPAGATE( measured_strings_receive( & address, & data, 1 ));
            arp_clear_address_req( 0, IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), address );
            free( address );
            free( data );
            return EOK;
        case NET_ARP_CLEAN_CACHE:
            return arp_clean_cache_req( 0 );
        case NET_IL_DEVICE_STATE:
            // do nothing - keep the cache
            return EOK;
        case NET_IL_RECEIVED:
            if( ! ERROR_OCCURRED( packet_translate( arp_globals.net_phone, & packet, IPC_GET_PACKET( call )))){
                fibril_rwlock_read_lock( & arp_globals.lock );
                do{
                    next = pq_detach( packet );
                    ERROR_CODE = arp_receive_message( IPC_GET_DEVICE( call ), packet );
                    if( ERROR_CODE != 1 ) pq_release( arp_globals.net_phone, packet_get_id( packet ));
                    packet = next;
                }while( packet );
                fibril_rwlock_read_unlock( & arp_globals.lock );
            }
            return ERROR_CODE;
        case NET_IL_MTU_CHANGED:
            return arp_mtu_changed_message( IPC_GET_DEVICE( call ), IPC_GET_MTU( call ));
    }
    return ENOTSUP;
}
 
/** @}
 */
 

Rev 4702	Rev 4708
1	/*	1	/*
2	* Copyright (c) 2009 Lukas Mejdrech	2	* Copyright (c) 2009 Lukas Mejdrech
3	* All rights reserved.	3	* All rights reserved.
4	*	4	*
5	* Redistribution and use in source and binary forms, with or without	5	* Redistribution and use in source and binary forms, with or without
6	* modification, are permitted provided that the following conditions	6	* modification, are permitted provided that the following conditions
7	* are met:	7	* are met:
8	*	8	*
9	* - Redistributions of source code must retain the above copyright	9	* - Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.	10	* notice, this list of conditions and the following disclaimer.
11	* - Redistributions in binary form must reproduce the above copyright	11	* - Redistributions in binary form must reproduce the above copyright
12	* notice, this list of conditions and the following disclaimer in the	12	* notice, this list of conditions and the following disclaimer in the
13	* documentation and/or other materials provided with the distribution.	13	* documentation and/or other materials provided with the distribution.
14	* - The name of the author may not be used to endorse or promote products	14	* - The name of the author may not be used to endorse or promote products
15	* derived from this software without specific prior written permission.	15	* derived from this software without specific prior written permission.
16	*	16	*
17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	*/	27	*/
28		28
29	/** @addtogroup arp	29	/** @addtogroup arp
30	* @{	30	* @{
31	*/	31	*/
32		32
33	/** @file	33	/** @file
34	* ARP module implementation.	34	* ARP module implementation.
35	* @see arp.h	35	* @see arp.h
36	*/	36	*/
37		37
38	#include <async.h>	38	#include <async.h>
39	#include <malloc.h>	39	#include <malloc.h>
40	#include <mem.h>	40	#include <mem.h>
41	#include <fibril_sync.h>	41	#include <fibril_sync.h>
42	#include <stdio.h>	42	#include <stdio.h>
43	#include <string.h>	43	#include <string.h>
44	#include <task.h>	44	#include <task.h>
45		45
46	#include <ipc/ipc.h>	46	#include <ipc/ipc.h>
47	#include <ipc/services.h>	47	#include <ipc/services.h>
48		48
49	#include "../../err.h"	49	#include "../../err.h"
50	#include "../../messages.h"	50	#include "../../messages.h"
51	#include "../../modules.h"	51	#include "../../modules.h"
52		52
53	#include "../../include/byteorder.h"	53	#include "../../include/byteorder.h"
54	#include "../../include/device.h"	54	#include "../../include/device.h"
55	#include "../../include/arp_interface.h"	55	#include "../../include/arp_interface.h"
56	#include "../../include/nil_interface.h"	56	#include "../../include/nil_interface.h"
57	#include "../../include/protocol_map.h"	57	#include "../../include/protocol_map.h"
58		58
59	#include "../../structures/measured_strings.h"	59	#include "../../structures/measured_strings.h"
60	#include "../../structures/packet/packet.h"	60	#include "../../structures/packet/packet.h"
61	#include "../../structures/packet/packet_client.h"	61	#include "../../structures/packet/packet_client.h"
62		62
63	#include "../il_messages.h"	63	#include "../il_messages.h"
64		64
65	#include "arp.h"	65	#include "arp.h"
66	#include "arp_header.h"	66	#include "arp_header.h"
67	#include "arp_oc.h"	67	#include "arp_oc.h"
68	#include "arp_module.h"	68	#include "arp_module.h"
69	#include "arp_messages.h"	69	#include "arp_messages.h"
70		70
71	/** ARP global data.	71	/** ARP global data.
72	*/	72	*/
73	arp_globals_t arp_globals;	73	arp_globals_t arp_globals;
74		74
75	/** Creates new protocol specific data.	75	/** Creates new protocol specific data.
76	* @param proto Protocol specific data. Output parameter.	76	* @param proto Protocol specific data. Output parameter.
77	* @param service Protocol module service. Input parameter.	77	* @param service Protocol module service. Input parameter.
78	* @param address Actual protocol device address. Input parameter.	78	* @param address Actual protocol device address. Input parameter.
79	* @returns EOK on success.	79	* @returns EOK on success.
80	* @returns ENOMEM if there is not enough memory left.	80	* @returns ENOMEM if there is not enough memory left.
81	*/	81	*/
82	int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address );	82	int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address );
83		83
84	/** Clears the device specific data.	84	/** Clears the device specific data.
85	* @param device The device specific data.	85	* @param device The device specific data.
86	*/	86	*/
87	void clear_device( arp_device_ref device );	87	void clear_device( arp_device_ref device );
88		88
89	/** @name Message processing functions	89	/** @name Message processing functions
90	*/	90	*/
91	/@{/	91	/@{/
92		92
93	/** Registers the device.	93	/** Registers the device.
94	* Creates new device entry in the cache or updates the protocol address if the device with the device identifier and the driver service exists.	94	* Creates new device entry in the cache or updates the protocol address if the device with the device identifier and the driver service exists.
95	* @param device_id The device identifier. Input parameter.	95	* @param device_id The device identifier. Input parameter.
96	* @param service The device driver service. Input parameter.	96	* @param service The device driver service. Input parameter.
97	* @param protocol The protocol service. Input parameter.	97	* @param protocol The protocol service. Input parameter.
98	* @param address The actual device protocol address.	98	* @param address The actual device protocol address.
99	* @returns EOK on success.	99	* @returns EOK on success.
100	* @returns EEXIST if another device with the same device identifier and different driver service exists.	100	* @returns EEXIST if another device with the same device identifier and different driver service exists.
101	* @returns ENOMEM if there is not enough memory left.	101	* @returns ENOMEM if there is not enough memory left.
102	* @returns Other error codes as defined for the measured_strings_return() function.	102	* @returns Other error codes as defined for the measured_strings_return() function.
103	*/	103	*/
104	int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address );	104	int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address );
105		105
106	/** Returns the hardware address for the given protocol address.	106	/** Returns the hardware address for the given protocol address.
107	* Sends the ARP request packet if the hardware address is not found in the cache.	107	* Sends the ARP request packet if the hardware address is not found in the cache.
108	* @param device_id The device identifier. Input parameter.	108	* @param device_id The device identifier. Input parameter.
109	* @param protocol The protocol service. Input parameter.	109	* @param protocol The protocol service. Input parameter.
110	* @param target The target protocol address. Input parameter.	110	* @param target The target protocol address. Input parameter.
111	* @returns The hardware address of the target.	111	* @returns The hardware address of the target.
112	* @returns NULL if the target parameter is NULL.	112	* @returns NULL if the target parameter is NULL.
113	* @returns NULL if the device is not found.	113	* @returns NULL if the device is not found.
114	* @returns NULL if the device packet is too small to send a request.	114	* @returns NULL if the device packet is too small to send a request.
115	* @returns NULL if the hardware address is not found in the cache.	115	* @returns NULL if the hardware address is not found in the cache.
116	*/	116	*/
117	measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target );	117	measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target );
118		118
119	/** Processes the received ARP packet.	119	/** Processes the received ARP packet.
120	* Updates the source hardware address if the source entry exists or the packet is targeted to my protocol address.	120	* Updates the source hardware address if the source entry exists or the packet is targeted to my protocol address.
121	* Responses to the ARP request if the packet is the ARP request and is targeted to my address.	121	* Responses to the ARP request if the packet is the ARP request and is targeted to my address.
122	* @param device_id The source device identifier. Input parameter.	122	* @param device_id The source device identifier. Input parameter.
123	* @param packet The received packet. Input/output parameter.	123	* @param packet The received packet. Input/output parameter.
124	* @returns EOK on success and the packet is no longer needed.	124	* @returns EOK on success and the packet is no longer needed.
125	* @returns 1 on success and the packet has been reused.	125	* @returns 1 on success and the packet has been reused.
126	* @returns EINVAL if the packet is too small to carry an ARP packet.	126	* @returns EINVAL if the packet is too small to carry an ARP packet.
127	* @returns EINVAL if the received address lengths differs from the registered values.	127	* @returns EINVAL if the received address lengths differs from the registered values.
128	* @returns ENOENT if the device is not found in the cache.	128	* @returns ENOENT if the device is not found in the cache.
129	* @returns ENOENT if the protocol for the device is not found in the cache.	129	* @returns ENOENT if the protocol for the device is not found in the cache.
130	* @returns ENOMEM if there is not enough memory left.	130	* @returns ENOMEM if there is not enough memory left.
131	*/	131	*/
132	int arp_receive_message( device_id_t device_id, packet_t packet );	132	int arp_receive_message( device_id_t device_id, packet_t packet );
133		133
134	/** Updates the device content length according to the new MTU value.	134	/** Updates the device content length according to the new MTU value.
135	* @param device_id The device identifier. Input parameter.	135	* @param device_id The device identifier. Input parameter.
136	* @param mtu The new mtu value. Input parameter.	136	* @param mtu The new mtu value. Input parameter.
137	* @returns ENOENT if device is not found.	137	* @returns ENOENT if device is not found.
138	* @returns EOK on success.	138	* @returns EOK on success.
139	*/	139	*/
140	int arp_mtu_changed_message( device_id_t device_id, size_t mtu );	140	int arp_mtu_changed_message( device_id_t device_id, size_t mtu );
141		141
142	/@}/	142	/@}/
143		143
144	DEVICE_MAP_IMPLEMENT( arp_cache, arp_device_t )	144	DEVICE_MAP_IMPLEMENT( arp_cache, arp_device_t )
145		145
146	INT_MAP_IMPLEMENT( arp_protos, arp_proto_t )	146	INT_MAP_IMPLEMENT( arp_protos, arp_proto_t )
147		147
148	GENERIC_CHAR_MAP_IMPLEMENT( arp_addr, measured_string_t )	148	GENERIC_CHAR_MAP_IMPLEMENT( arp_addr, measured_string_t )
149		149
150	task_id_t arp_task_get_id( void ){	150	task_id_t arp_task_get_id( void ){
151	return task_get_id();	151	return task_get_id();
152	}	152	}
153		153
154	int arp_clear_device_req( int arp_phone, device_id_t device_id ){	154	int arp_clear_device_req( int arp_phone, device_id_t device_id ){
155	arp_device_ref device;	155	arp_device_ref device;
156		156
157	fibril_rwlock_write_lock( & arp_globals.lock );	157	fibril_rwlock_write_lock( & arp_globals.lock );
158	device = arp_cache_find( & arp_globals.cache, device_id );	158	device = arp_cache_find( & arp_globals.cache, device_id );
159	if( ! device ){	159	if( ! device ){
160	fibril_rwlock_write_unlock( & arp_globals.lock );	160	fibril_rwlock_write_unlock( & arp_globals.lock );
161	return ENOENT;	161	return ENOENT;
162	}	162	}
163	clear_device( device );	163	clear_device( device );
164	printf( "Device %d cleared\n", device_id );	164	printf( "Device %d cleared\n", device_id );
165	fibril_rwlock_write_unlock( & arp_globals.lock );	165	fibril_rwlock_write_unlock( & arp_globals.lock );
166	return EOK;	166	return EOK;
167	}	167	}
168		168
169	int arp_clear_address_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address ){	169	int arp_clear_address_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address ){
170	arp_device_ref device;	170	arp_device_ref device;
171	arp_proto_ref proto;	171	arp_proto_ref proto;
172		172
173	fibril_rwlock_write_lock( & arp_globals.lock );	173	fibril_rwlock_write_lock( & arp_globals.lock );
174	device = arp_cache_find( & arp_globals.cache, device_id );	174	device = arp_cache_find( & arp_globals.cache, device_id );
175	if( ! device ){	175	if( ! device ){
176	fibril_rwlock_write_unlock( & arp_globals.lock );	176	fibril_rwlock_write_unlock( & arp_globals.lock );
177	return ENOENT;	177	return ENOENT;
178	}	178	}
179	proto = arp_protos_find( & device->protos, protocol );	179	proto = arp_protos_find( & device->protos, protocol );
180	if( ! proto ){	180	if( ! proto ){
181	fibril_rwlock_write_unlock( & arp_globals.lock );	181	fibril_rwlock_write_unlock( & arp_globals.lock );
182	return ENOENT;	182	return ENOENT;
183	}	183	}
184	arp_addr_exclude( & proto->addresses, address->value, address->length );	184	arp_addr_exclude( & proto->addresses, address->value, address->length );
185	fibril_rwlock_write_unlock( & arp_globals.lock );	185	fibril_rwlock_write_unlock( & arp_globals.lock );
186	return EOK;	186	return EOK;
187	}	187	}
188		188
189	int arp_clean_cache_req( int arp_phone ){	189	int arp_clean_cache_req( int arp_phone ){
190	int count;	190	int count;
191	arp_device_ref device;	191	arp_device_ref device;
192		192
193	fibril_rwlock_write_lock( & arp_globals.lock );	193	fibril_rwlock_write_lock( & arp_globals.lock );
194	for( count = arp_cache_count( & arp_globals.cache ) - 1; count >= 0; -- count ){	194	for( count = arp_cache_count( & arp_globals.cache ) - 1; count >= 0; -- count ){
195	device = arp_cache_get_index( & arp_globals.cache, count );	195	device = arp_cache_get_index( & arp_globals.cache, count );
196	if( device ){	196	if( device ){
197	clear_device( device );	197	clear_device( device );
198	if( device->addr_data ) free( device->addr_data );	198	if( device->addr_data ) free( device->addr_data );
199	if( device->broadcast_data ) free( device->broadcast_data );	199	if( device->broadcast_data ) free( device->broadcast_data );
200	}	200	}
201	}	201	}
202	arp_cache_clear( & arp_globals.cache );	202	arp_cache_clear( & arp_globals.cache );
203	fibril_rwlock_write_unlock( & arp_globals.lock );	203	fibril_rwlock_write_unlock( & arp_globals.lock );
204	printf( "Cache cleaned\n" );	204	printf( "Cache cleaned\n" );
205	return EOK;	205	return EOK;
206	}	206	}
207		207
208	int arp_device_req( int arp_phone, device_id_t device_id, services_t protocol, services_t netif, measured_string_ref address ){	208	int arp_device_req( int arp_phone, device_id_t device_id, services_t protocol, services_t netif, measured_string_ref address ){
209	ERROR_DECLARE;	209	ERROR_DECLARE;
210		210
211	measured_string_ref tmp;	211	measured_string_ref tmp;
212		212
213	tmp = measured_string_copy( address );	213	tmp = measured_string_copy( address );
214	if( ERROR_OCCURRED( arp_device_message( device_id, netif, protocol, tmp ))){	214	if( ERROR_OCCURRED( arp_device_message( device_id, netif, protocol, tmp ))){
215	free( tmp->value );	215	free( tmp->value );
216	free( tmp );	216	free( tmp );
217	}	217	}
218	return ERROR_CODE;	218	return ERROR_CODE;
219	}	219	}
220		220
221	int arp_translate_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address, measured_string_ref * translation, char ** data ){	221	int arp_translate_req( int arp_phone, device_id_t device_id, services_t protocol, measured_string_ref address, measured_string_ref * translation, char ** data ){
222	measured_string_ref tmp;	222	measured_string_ref tmp;
223		223
224	fibril_rwlock_read_lock( & arp_globals.lock );	224	fibril_rwlock_read_lock( & arp_globals.lock );
225	tmp = arp_translate_message( device_id, protocol, address );	225	tmp = arp_translate_message( device_id, protocol, address );
226	if( tmp ){	226	if( tmp ){
227	* translation = measured_string_copy( tmp );	227	* translation = measured_string_copy( tmp );
228	fibril_rwlock_read_unlock( & arp_globals.lock );	228	fibril_rwlock_read_unlock( & arp_globals.lock );
229	if( * translation ){	229	if( * translation ){
230	* data = ( ** translation ).value;	230	* data = ( ** translation ).value;
231	return EOK;	231	return EOK;
232	}else{	232	}else{
233	return ENOMEM;	233	return ENOMEM;
234	}	234	}
235	}else{	235	}else{
236	fibril_rwlock_read_unlock( & arp_globals.lock );	236	fibril_rwlock_read_unlock( & arp_globals.lock );
237	return ENOENT;	237	return ENOENT;
238	}	238	}
239	}	239	}
240		240
241	int arp_initialize( async_client_conn_t client_connection ){	241	int arp_initialize( async_client_conn_t client_connection ){
242	ERROR_DECLARE;	242	ERROR_DECLARE;
243		243
244	fibril_rwlock_initialize( & arp_globals.lock );	244	fibril_rwlock_initialize( & arp_globals.lock );
245	fibril_rwlock_write_lock( & arp_globals.lock );	245	fibril_rwlock_write_lock( & arp_globals.lock );
246	arp_globals.client_connection = client_connection;	246	arp_globals.client_connection = client_connection;
247	ERROR_PROPAGATE( arp_cache_initialize( & arp_globals.cache ));	247	ERROR_PROPAGATE( arp_cache_initialize( & arp_globals.cache ));
248	fibril_rwlock_write_unlock( & arp_globals.lock );	248	fibril_rwlock_write_unlock( & arp_globals.lock );
249	return EOK;	249	return EOK;
250	}	250	}
251		251
252	int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address ){	252	int arp_proto_create( arp_proto_ref * proto, services_t service, measured_string_ref address ){
253	ERROR_DECLARE;	253	ERROR_DECLARE;
254		254
255	* proto = ( arp_proto_ref ) malloc( sizeof( arp_proto_t ));	255	* proto = ( arp_proto_ref ) malloc( sizeof( arp_proto_t ));
256	if( !( * proto )) return ENOMEM;	256	if( !( * proto )) return ENOMEM;
257	( ** proto ).service = service;	257	( ** proto ).service = service;
258	( ** proto ).addr = address;	258	( ** proto ).addr = address;
259	( ** proto ).addr_data = address->value;	259	( ** proto ).addr_data = address->value;
260	if( ERROR_OCCURRED( arp_addr_initialize( &( ** proto).addresses ))){	260	if( ERROR_OCCURRED( arp_addr_initialize( &( ** proto).addresses ))){
261	free( * proto );	261	free( * proto );
262	return ERROR_CODE;	262	return ERROR_CODE;
263	}	263	}
264	return EOK;	264	return EOK;
265	}	265	}
266		266
267	int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address ){	267	int arp_device_message( device_id_t device_id, services_t service, services_t protocol, measured_string_ref address ){
268	ERROR_DECLARE;	268	ERROR_DECLARE;
269		269
270	arp_device_ref device;	270	arp_device_ref device;
271	arp_proto_ref proto;	271	arp_proto_ref proto;
272	int index;	272	int index;
273	hw_type_t hardware;	273	hw_type_t hardware;
274		274
275	fibril_rwlock_write_lock( & arp_globals.lock );	275	fibril_rwlock_write_lock( & arp_globals.lock );
276	// an existing device?	276	// an existing device?
277	device = arp_cache_find( & arp_globals.cache, device_id );	277	device = arp_cache_find( & arp_globals.cache, device_id );
278	if( device ){	278	if( device ){
279	if( device->service != service ){	279	if( device->service != service ){
280	printf( "Device %d already exists\n", device->device_id );	280	printf( "Device %d already exists\n", device->device_id );
281	fibril_rwlock_write_unlock( & arp_globals.lock );	281	fibril_rwlock_write_unlock( & arp_globals.lock );
282	return EEXIST;	282	return EEXIST;
283	}	283	}
284	proto = arp_protos_find( & device->protos, protocol );	284	proto = arp_protos_find( & device->protos, protocol );
285	if( proto ){	285	if( proto ){
286	free( proto->addr );	286	free( proto->addr );
287	free( proto->addr_data );	287	free( proto->addr_data );
288	proto->addr = address;	288	proto->addr = address;
289	proto->addr_data = address->value;	289	proto->addr_data = address->value;
290	}else{	290	}else{
291	if( ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){	291	if( ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
292	fibril_rwlock_write_unlock( & arp_globals.lock );	292	fibril_rwlock_write_unlock( & arp_globals.lock );
293	return ERROR_CODE;	293	return ERROR_CODE;
294	}	294	}
295	index = arp_protos_add( & device->protos, proto->service, proto );	295	index = arp_protos_add( & device->protos, proto->service, proto );
296	if( index < 0 ){	296	if( index < 0 ){
297	fibril_rwlock_write_unlock( & arp_globals.lock );	297	fibril_rwlock_write_unlock( & arp_globals.lock );
298	free( proto );	298	free( proto );
299	return index;	299	return index;
300	}	300	}
301	printf( "New protocol added:\n\tdevice id\t= %d\n\tproto\t= %d", device_id, protocol );	301	printf( "New protocol added:\n\tdevice id\t= %d\n\tproto\t= %d", device_id, protocol );
302	}	302	}
303	}else{	303	}else{
304	hardware = hardware_map( service );	304	hardware = hardware_map( service );
305	if( ! hardware ) return ENOENT;	305	if( ! hardware ) return ENOENT;
306	// create a new device	306	// create a new device
307	device = ( arp_device_ref ) malloc( sizeof( arp_device_t ));	307	device = ( arp_device_ref ) malloc( sizeof( arp_device_t ));
308	if( ! device ){	308	if( ! device ){
309	fibril_rwlock_write_unlock( & arp_globals.lock );	309	fibril_rwlock_write_unlock( & arp_globals.lock );
310	return ENOMEM;	310	return ENOMEM;
311	}	311	}
312	device->hardware = hardware;	312	device->hardware = hardware;
313	device->device_id = device_id;	313	device->device_id = device_id;
314	if( ERROR_OCCURRED( arp_protos_initialize( & device->protos ))	314	if( ERROR_OCCURRED( arp_protos_initialize( & device->protos ))
315	\|\| ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){	315	\|\| ERROR_OCCURRED( arp_proto_create( & proto, protocol, address ))){
316	fibril_rwlock_write_unlock( & arp_globals.lock );	316	fibril_rwlock_write_unlock( & arp_globals.lock );
317	free( device );	317	free( device );
318	return ERROR_CODE;	318	return ERROR_CODE;
319	}	319	}
320	index = arp_protos_add( & device->protos, proto->service, proto );	320	index = arp_protos_add( & device->protos, proto->service, proto );
321	if( index < 0 ){	321	if( index < 0 ){
322	fibril_rwlock_write_unlock( & arp_globals.lock );	322	fibril_rwlock_write_unlock( & arp_globals.lock );
323	arp_protos_destroy( & device->protos );	323	arp_protos_destroy( & device->protos );
324	free( device );	324	free( device );
325	return index;	325	return index;
326	}	326	}
327	device->service = service;	327	device->service = service;
328	// bind the new one	328	// bind the new one
329	device->phone = bind_service( device->service, ( ipcarg_t ) device->device_id, SERVICE_ARP, 0, arp_globals.client_connection );	329	device->phone = bind_service( device->service, ( ipcarg_t ) device->device_id, SERVICE_ARP, 0, arp_globals.client_connection );
330	if( device->phone < 0 ){	330	if( device->phone < 0 ){
331	fibril_rwlock_write_unlock( & arp_globals.lock );	331	fibril_rwlock_write_unlock( & arp_globals.lock );
332	arp_protos_destroy( & device->protos );	332	arp_protos_destroy( & device->protos );
333	free( device );	333	free( device );
334	return EREFUSED;	334	return EREFUSED;
335	}	335	}
336	// get packet dimensions	336	// get packet dimensions
337	if( ERROR_OCCURRED( nil_packet_size_req( device->phone, device_id, & device->addr_len, & device->prefix, & device->content, & device->suffix ))){	337	if( ERROR_OCCURRED( nil_packet_size_req( device->phone, device_id, & device->addr_len, & device->prefix, & device->content, & device->suffix ))){
338	fibril_rwlock_write_unlock( & arp_globals.lock );	338	fibril_rwlock_write_unlock( & arp_globals.lock );
339	arp_protos_destroy( & device->protos );	339	arp_protos_destroy( & device->protos );
340	free( device );	340	free( device );
341	return ERROR_CODE;	341	return ERROR_CODE;
342	}	342	}
343	// get hardware address	343	// get hardware address
344	if( ERROR_OCCURRED( nil_get_addr( device->phone, device_id, & device->addr, & device->addr_data ))){	344	if( ERROR_OCCURRED( nil_get_addr( device->phone, device_id, & device->addr, & device->addr_data ))){
345	fibril_rwlock_write_unlock( & arp_globals.lock );	345	fibril_rwlock_write_unlock( & arp_globals.lock );
346	arp_protos_destroy( & device->protos );	346	arp_protos_destroy( & device->protos );
347	free( device );	347	free( device );
348	return ERROR_CODE;	348	return ERROR_CODE;
349	}	349	}
350	// get broadcast address	350	// get broadcast address
351	if( ERROR_OCCURRED( nil_get_broadcast_addr( device->phone, device_id, & device->broadcast_addr, & device->broadcast_data ))){	351	if( ERROR_OCCURRED( nil_get_broadcast_addr( device->phone, device_id, & device->broadcast_addr, & device->broadcast_data ))){
352	fibril_rwlock_write_unlock( & arp_globals.lock );	352	fibril_rwlock_write_unlock( & arp_globals.lock );
353	free( device->addr );	353	free( device->addr );
354	free( device->addr_data );	354	free( device->addr_data );
355	arp_protos_destroy( & device->protos );	355	arp_protos_destroy( & device->protos );
356	free( device );	356	free( device );
357	return ERROR_CODE;	357	return ERROR_CODE;
358	}	358	}
359	if( ERROR_OCCURRED( arp_cache_add( & arp_globals.cache, device->device_id, device ))){	359	if( ERROR_OCCURRED( arp_cache_add( & arp_globals.cache, device->device_id, device ))){
360	fibril_rwlock_write_unlock( & arp_globals.lock );	360	fibril_rwlock_write_unlock( & arp_globals.lock );
361	free( device->addr );	361	free( device->addr );
362	free( device->addr_data );	362	free( device->addr_data );
363	free( device->broadcast_addr );	363	free( device->broadcast_addr );
364	free( device->broadcast_data );	364	free( device->broadcast_data );
365	arp_protos_destroy( & device->protos );	365	arp_protos_destroy( & device->protos );
366	free( device );	366	free( device );
367	return ERROR_CODE;	367	return ERROR_CODE;
368	}	368	}
369	printf( "New device registered:\n\tid\t= %d\n\ttype\t= 0x%x\n\tservice\t= %d\n\tproto\t= %d\n", device->device_id, device->hardware, device->service, protocol );	369	printf( "New device registered:\n\tid\t= %d\n\ttype\t= 0x%x\n\tservice\t= %d\n\tproto\t= %d\n", device->device_id, device->hardware, device->service, protocol );
370	}	370	}
371	fibril_rwlock_write_unlock( & arp_globals.lock );	371	fibril_rwlock_write_unlock( & arp_globals.lock );
372	return EOK;	372	return EOK;
373	}	373	}
374		374
375	measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target ){	375	measured_string_ref arp_translate_message( device_id_t device_id, services_t protocol, measured_string_ref target ){
376	arp_device_ref device;	376	arp_device_ref device;
377	arp_proto_ref proto;	377	arp_proto_ref proto;
378	measured_string_ref addr;	378	measured_string_ref addr;
379	size_t length;	379	size_t length;
380	packet_t packet;	380	packet_t packet;
381	arp_header_ref header;	381	arp_header_ref header;
382		382
383	if( ! target ) return NULL;	383	if( ! target ) return NULL;
384	device = arp_cache_find( & arp_globals.cache, device_id );	384	device = arp_cache_find( & arp_globals.cache, device_id );
385	if( ! device ) return NULL;	385	if( ! device ) return NULL;
386	proto = arp_protos_find( & device->protos, protocol );	386	proto = arp_protos_find( & device->protos, protocol );
387	if(( ! proto ) \|\| ( proto->addr->length != target->length )) return NULL;	387	if(( ! proto ) \|\| ( proto->addr->length != target->length )) return NULL;
388	addr = arp_addr_find( & proto->addresses, target->value, target->length );	388	addr = arp_addr_find( & proto->addresses, target->value, target->length );
389	if( addr ) return addr;	389	if( addr ) return addr;
390	// ARP packet content size = header + ( address + translation ) * 2	390	// ARP packet content size = header + ( address + translation ) * 2
391	length = 8 + ( CONVERT_SIZE( char, uint8_t, proto->addr->length ) + CONVERT_SIZE( char, uint8_t, device->addr->length )) * 2;	391	length = 8 + ( CONVERT_SIZE( char, uint8_t, proto->addr->length ) + CONVERT_SIZE( char, uint8_t, device->addr->length )) * 2;
392	if( length > device->content ) return NULL;	392	if( length > device->content ) return NULL;
393	packet = packet_get_4( arp_globals.net_phone, device->addr_len, device->prefix, length, device->suffix );	393	packet = packet_get_4( arp_globals.net_phone, device->addr_len, device->prefix, length, device->suffix );
394	if( ! packet ) return NULL;	394	if( ! packet ) return NULL;
395	header = ( arp_header_ref ) packet_suffix( packet, length );	395	header = ( arp_header_ref ) packet_suffix( packet, length );
396	if( ! header ){	396	if( ! header ){
397	pq_release( arp_globals.net_phone, packet_get_id( packet ));	397	pq_release( arp_globals.net_phone, packet_get_id( packet ));
398	return NULL;	398	return NULL;
399	}	399	}
400	header->hardware = htons( device->hardware );	400	header->hardware = htons( device->hardware );
401	header->hardware_length = ( uint8_t ) device->addr->length;	401	header->hardware_length = ( uint8_t ) device->addr->length;
402	header->protocol = htons( protocol_map( device->service, protocol ));	402	header->protocol = htons( protocol_map( device->service, protocol ));
403	header->protocol_length = ( uint8_t ) proto->addr->length;	403	header->protocol_length = ( uint8_t ) proto->addr->length;
404	header->operation = htons( ARPOP_REQUEST );	404	header->operation = htons( ARPOP_REQUEST );
405	length = sizeof( arp_header_t );	405	length = sizeof( arp_header_t );
406	memcpy((( uint8_t * ) header ) + length, device->addr->value, device->addr->length );	406	memcpy((( uint8_t * ) header ) + length, device->addr->value, device->addr->length );
407	length += device->addr->length;	407	length += device->addr->length;
408	memcpy((( uint8_t * ) header ) + length, proto->addr->value, proto->addr->length );	408	memcpy((( uint8_t * ) header ) + length, proto->addr->value, proto->addr->length );
409	length += proto->addr->length;	409	length += proto->addr->length;
410	bzero((( uint8_t * ) header ) + length, device->addr->length );	410	bzero((( uint8_t * ) header ) + length, device->addr->length );
411	length += device->addr->length;	411	length += device->addr->length;
412	memcpy((( uint8_t * ) header ) + length, target->value, target->length );	412	memcpy((( uint8_t * ) header ) + length, target->value, target->length );
413	if( packet_set_addr( packet, ( uint8_t * ) device->addr->value, ( uint8_t * ) device->broadcast_addr->value, CONVERT_SIZE( char, uint8_t, device->addr->length )) != EOK ){	413	if( packet_set_addr( packet, ( uint8_t * ) device->addr->value, ( uint8_t * ) device->broadcast_addr->value, CONVERT_SIZE( char, uint8_t, device->addr->length )) != EOK ){
414	pq_release( arp_globals.net_phone, packet_get_id( packet ));	414	pq_release( arp_globals.net_phone, packet_get_id( packet ));
415	return NULL;	415	return NULL;
416	}	416	}
417	nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );	417	nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
418	return NULL;	418	return NULL;
419	}	419	}
420		420
421	int arp_receive_message( device_id_t device_id, packet_t packet ){	421	int arp_receive_message( device_id_t device_id, packet_t packet ){
422	ERROR_DECLARE;	422	ERROR_DECLARE;
423		423
424	size_t length;	424	size_t length;
425	arp_header_ref header;	425	arp_header_ref header;
426	arp_device_ref device;	426	arp_device_ref device;
427	arp_proto_ref proto;	427	arp_proto_ref proto;
428	measured_string_ref hw_source;	428	measured_string_ref hw_source;
429	uint8_t * src_hw;	429	uint8_t * src_hw;
430	uint8_t * src_proto;	430	uint8_t * src_proto;
431	uint8_t * des_hw;	431	uint8_t * des_hw;
432	uint8_t * des_proto;	432	uint8_t * des_proto;
433		433
434	length = packet_get_data_length( packet );	434	length = packet_get_data_length( packet );
435	if( length <= sizeof( arp_header_t )) return EINVAL;	435	if( length <= sizeof( arp_header_t )) return EINVAL;
436	device = arp_cache_find( & arp_globals.cache, device_id );	436	device = arp_cache_find( & arp_globals.cache, device_id );
437	if( ! device ) return ENOENT;	437	if( ! device ) return ENOENT;
438	header = ( arp_header_ref ) packet_get_data( packet );	438	header = ( arp_header_ref ) packet_get_data( packet );
439	if(( ntohs( header->hardware ) != device->hardware )	439	if(( ntohs( header->hardware ) != device->hardware )
440	// TODO how remove conversion from int '2' to uint?	-
441	\|\| ( length < sizeof( arp_header_t ) + ( header->hardware_length + header->protocol_length ) * 2u )){	440	\|\| ( length < sizeof( arp_header_t ) + header->hardware_length * 2u + header->protocol_length * 2u )){
442	return EINVAL;	441	return EINVAL;
443	}	442	}
444	proto = arp_protos_find( & device->protos, protocol_unmap( device->service, ntohs( header->protocol )));	443	proto = arp_protos_find( & device->protos, protocol_unmap( device->service, ntohs( header->protocol )));
445	if( ! proto ) return ENOENT;	444	if( ! proto ) return ENOENT;
446	src_hw = (( uint8_t * ) header ) + sizeof( arp_header_t );	445	src_hw = (( uint8_t * ) header ) + sizeof( arp_header_t );
447	src_proto = src_hw + header->hardware_length;	446	src_proto = src_hw + header->hardware_length;
448	des_hw = src_proto + header->protocol_length;	447	des_hw = src_proto + header->protocol_length;
449	des_proto = des_hw + header->hardware_length;	448	des_proto = des_hw + header->hardware_length;
450	hw_source = arp_addr_find( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ));	449	hw_source = arp_addr_find( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ));
451	// exists?	450	// exists?
452	if( hw_source ){	451	if( hw_source ){
453	if( hw_source->length != CONVERT_SIZE( uint8_t, char, header->hardware_length )){	452	if( hw_source->length != CONVERT_SIZE( uint8_t, char, header->hardware_length )){
454	return EINVAL;	453	return EINVAL;
455	}	454	}
456	memcpy( hw_source->value, src_hw, hw_source->length );	455	memcpy( hw_source->value, src_hw, hw_source->length );
457	}	456	}
458	// is my protocol address?	457	// is my protocol address?
459	if( proto->addr->length != CONVERT_SIZE( uint8_t, char, header->protocol_length )){	458	if( proto->addr->length != CONVERT_SIZE( uint8_t, char, header->protocol_length )){
460	return EINVAL;	459	return EINVAL;
461	}	460	}
462	if( ! str_lcmp( proto->addr->value, ( char * ) des_proto, proto->addr->length )){	461	if( ! str_lcmp( proto->addr->value, ( char * ) des_proto, proto->addr->length )){
463	// not already upadted?	462	// not already upadted?
464	if( ! hw_source ){	463	if( ! hw_source ){
465	hw_source = measured_string_create_bulk(( char * ) src_hw, CONVERT_SIZE( uint8_t, char, header->hardware_length ));	464	hw_source = measured_string_create_bulk(( char * ) src_hw, CONVERT_SIZE( uint8_t, char, header->hardware_length ));
466	if( ! hw_source ) return ENOMEM;	465	if( ! hw_source ) return ENOMEM;
467	ERROR_PROPAGATE( arp_addr_add( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ), hw_source ));	466	ERROR_PROPAGATE( arp_addr_add( & proto->addresses, ( char * ) src_proto, CONVERT_SIZE( uint8_t, char, header->protocol_length ), hw_source ));
468	}	467	}
469	if( ntohs( header->operation ) == ARPOP_REQUEST ){	468	if( ntohs( header->operation ) == ARPOP_REQUEST ){
470	header->operation = htons( ARPOP_REPLY );	469	header->operation = htons( ARPOP_REPLY );
471	memcpy( des_proto, src_proto, header->protocol_length );	470	memcpy( des_proto, src_proto, header->protocol_length );
472	memcpy( src_proto, proto->addr->value, header->protocol_length );	471	memcpy( src_proto, proto->addr->value, header->protocol_length );
473	memcpy( src_hw, device->addr->value, device->addr_len );	472	memcpy( src_hw, device->addr->value, device->addr_len );
474	memcpy( des_hw, hw_source->value, header->hardware_length );	473	memcpy( des_hw, hw_source->value, header->hardware_length );
475	ERROR_PROPAGATE( packet_set_addr( packet, src_hw, des_hw, header->hardware_length ));	474	ERROR_PROPAGATE( packet_set_addr( packet, src_hw, des_hw, header->hardware_length ));
476	nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );	475	nil_send_msg( device->phone, device_id, packet, SERVICE_ARP );
477	return 1;	476	return 1;
478	}	477	}
479	}	478	}
480	return EOK;	479	return EOK;
481	}	480	}
482		481
483	void clear_device( arp_device_ref device ){	482	void clear_device( arp_device_ref device ){
484	int count;	483	int count;
485	arp_proto_ref proto;	484	arp_proto_ref proto;
486		485
487	for( count = arp_protos_count( & device->protos ) - 1; count >= 0; -- count ){	486	for( count = arp_protos_count( & device->protos ) - 1; count >= 0; -- count ){
488	proto = arp_protos_get_index( & device->protos, count );	487	proto = arp_protos_get_index( & device->protos, count );
489	if( proto ){	488	if( proto ){
490	if( proto->addr ) free( proto->addr );	489	if( proto->addr ) free( proto->addr );
491	if( proto->addr_data ) free( proto->addr_data );	490	if( proto->addr_data ) free( proto->addr_data );
492	arp_addr_destroy( & proto->addresses );	491	arp_addr_destroy( & proto->addresses );
493	}	492	}
494	}	493	}
495	arp_protos_clear( & device->protos );	494	arp_protos_clear( & device->protos );
496	}	495	}
497		496
498	int arp_connect_module( services_t service ){	497	int arp_connect_module( services_t service ){
-		498	if( service != SERVICE_ARP ) return EINVAL;
499	return EOK;	499	return EOK;

Subversion Repositories HelenOS

(root)/branches/network/uspace/srv/net/il/arp/arp.c – Rev 4702 → 4708