WebSVN – HelenOS – Diff – /trunk/uspace/app/bdsh/cmds/mknewcmd


#!/bin/sh
# Copyright (C) 2008 Tim Post - All Rights Reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# Neither the name of the original program's authors nor the names of its
# contributors may be used to endorse or promote products derived from this
# software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
 
# Script to generate skeletal files for a new command
# Uses `getopt', not quite a bash-ism but might be
# lacking on some legacy systems.
 
# If your shell does not support eval, shift (x) or
# here-now documents, sorry :) 
 
usage()
{
	def="$DEFAULT_COMMAND"
	cat << EOF
\`$PROGNAME' generates skeletal command files to simplify adding commands
Usage: $PROGNAME [options] <location>
Options:
  -n, --name         Name of the command (default: ${def})
  -d, --desc         Short (20 30 chars) description of the command
                     (def: "The $def command")
  -e, --entry        Entry function of the command (def: cmd_${def})
  -h, --help-entry   Entry function for command help (def: help_cmd_${def})
  -a, --alias        Alias (nickname) for this command (def: none)
  -r, --restrict     Restriction level (interactive, non-interactive, both)
                     (def: module is both, builtin is interactive only)
  -t, --type         Type of command (module or builtin) (def: module)
  -H, --help         This help summary
  -V, --version      Print $PROGNAME version and exit normally
 
Notes:
  You must supply at least the name of the command.
 
  If you do not specify a location (i.e. modules/foo), the command will be
  created in modules/command_name or builtins/command_name depending on your
  selection.
 
  This script will only create skeletal files and inform you what headers
  need to be modified to incorporate the command. You will also have to
  manually update the main Makefile.
 
  This script is intended only to be a convenience for developers. Example use:
    $PROGNAME -n foo -d "Foo power" -a bar -r both -t module modules/foo
 
  The example would generate a modular command named 'foo', which is also
  reached by typing 'bar' and available in either interactive or noninteractive
  mode.
 
  Skeletal files do *not* depend on the autoconf generated "config.h" unless you
  include it. This may or may not be desirable depending on your use.
 
Report bugs to $PROGMAINT
 
EOF
}
 
# Convert a string to all uppercase
toupper()
{
	local str="$1"
 
	echo "${str}" | tr 'a-z' 'A-Z'
}
 
# Template stored `here-now' style, this generates all files needed
# for a new command according to arguments passed.
generate_code()
{
	echo "Creating ${OUTDIR}/${CMDNAME}.def ..."
	cat << EOF > ${OUTDIR}/${CMDNAME}.def
{
	"${CMDNAME}",
	"${CMDDESC}",
	&${CMDENTRY},
	&${HELPENTRY},
	${CMDRESTRICT}
},
 
EOF
	[ -n "${CMDALIAS}" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.def
{
	"${CMDALIAS}",
	NULL,
	&${CMDENTRY},
	&${HELPENTRY},
	${CMDRESTRICT}
},
 
EOF
	local defname=$(toupper "${CMDNAME}")
	echo "Creating ${OUTDIR}/entry.h ..."
	cat << EOF > ${OUTDIR}/entry.h
#ifndef ${defname}_ENTRY_H
#define ${defname}_ENTRY_H
 
EOF
	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/entry.h
/* Entry points for the ${CMDNAME} command */
extern int * ${CMDENTRY}(char **);
extern void * ${HELPENTRY}(unsigned int);
 
#endif /* ${defname}_ENTRY_H */
 
EOF
	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/entry.h
/* Pick up cliuser_t */
#include "scli.h"
 
/* Entry points for the ${CMDNAME} command */
extern int * ${CMDENTRY}(char **, cliuser_t *);
extern void * ${HELPENTRY}(unsigned int);
 
#endif /* ${defname}_ENTRY_H */
 
EOF
	echo "Creating ${OUTDIR}/${CMDNAME}.h ..."
	cat << EOF > ${OUTDIR}/${CMDNAME}.h
#ifndef ${defname}_H
#define ${defname}_H
 
/* Prototypes for the ${CMDNAME} command, excluding entry points */
 
 
#endif /* ${defname}_H */
 
EOF
	echo "Creating ${OUTDIR}/${CMDNAME}.c ..."
	cat << EOF > ${OUTDIR}/${CMDNAME}.c
/* Automatically generated by ${PROGNAME} on ${TIMESTAMP}
 * This is machine generated output. The author of ${PROGNAME} claims no
 * copyright over the contents of this file. Where legally permitted, the
 * contents herein are donated to the public domain.
 *
 * You should apply any license and copyright that you wish to this file,
 * replacing this header in its entirety. */
 
#include <stdio.h>
#include <stdlib.h>
#include "config.h"
#include "util.h"
#include "errors.h"
#include "entry.h"
#include "${CMDNAME}.h"
#include "cmds.h"
 
static char *cmdname = "${CMDNAME}";
 
/* Dispays help for ${CMDNAME} in various levels */
void * ${HELPENTRY}(unsigned int level)
{
	printf("This is the %s help for '%s'.\n",
		level ? EXT_HELP : SHORT_HELP, cmdname);
	return CMD_VOID;
}
 
EOF
	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c
/* Main entry point for ${CMDNAME}, accepts an array of arguments */
int * ${CMDENTRY}(char **argv)
EOF
	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c
/* Main entry point for ${CMDNAME}, accepts an array of arguments and a
 * pointer to the cliuser_t structure */
int * ${CMDENTRY}(char **argv, cliuser_t *usr)
EOF
	cat << EOF >> ${OUTDIR}/${CMDNAME}.c
{
	unsigned int argc;
	unsigned int i;
 
	/* Count the arguments */
	for (argc = 0; argv[argc] != NULL; argc ++);
 
	printf("%s %s\n", TEST_ANNOUNCE, cmdname);
	printf("%d arguments passed to %s", argc - 1, cmdname);
 
	if (argc < 2) {
		printf("\n");
		return CMD_SUCCESS;
	}
 
	printf(":\n");
	for (i = 1; i < argc; i++)
		printf("[%d] -> %s\n", i, argv[i]);
 
	return CMD_SUCCESS;
}
 
EOF
	printf "Done.\n\nYou should now modify %ss/%ss.h and ../Makefile" \
		"${CMDTYPE}" "${CMDTYPE}"
	printf " to include your new command.\n"
	[ -n "$CMDALIAS" ] &&  {
		printf "\nYou should also modify %ss/%s_aliases.h and " \
			"${CMDTYPE}" "${CMDTYPE}"
		printf "add %s as an alias for %s\n" \
			"${CMDALIAS}" "${CMDNAME}"
	}
	printf "\nOnce completed, re-run make\n\n"
}
 
# Main program
 
TIMESTAMP="$(date)"
PROGNAME=$(basename $0)
PROGVER="0.0.1"
PROGMAINT="Tim Post <echo@echoreply.us>"
DEFAULT_COMMAND="cmdname"
 
# We need at least one
[ $# = 0 ] && usage && exit 1;
 
TEMP=$(getopt -o n:d:e:h:a:r:t:HV \
--long name:,desc:,entry:,help-entry:,alias:,restrict:,type:,help,version \
-- "$@") || {
	echo "Try $PROGNAME --help for help"
}
 
eval set -- "$TEMP"
 
while true; do
	case "$1" in
	-n | --name)
		CMDNAME="$2"
		shift 2
		continue
	;;
	-d | --desc)
		CMDDESC="$2"
		shift 2
		continue
	;;
	-e | --entry)
		CMDENTRY="$2"
		shift 2
		continue
	;;
	-h | --help-entry)
		HELPENTRY="$2"
		shift 2
		continue
	;;
	-a | --alias)
		CMDALIAS="$2"
		shift 2
		continue
	;;
	-r | --restrict)
		CMDRESTRICT="$2"
		shift 2
		continue
	;;
	-t | --type)
		CMDTYPE="$2"
		shift 2
		continue
	;;
	-H | --help)
		usage
		exit 0
	;;
	-V | --version)
		echo "$PROGVER"
		exit 0
	;;
	--)
		break
	;;
	esac
done
 
# Pick up a location if one was specified
eval set -- "$*"
[ -n "$2" ] && OUTDIR="$2"
 
# Fill in defaults for whatever was not specified
[ -n "$CMDNAME" ] || CMDNAME="$DEFAULT_COMMAND"
[ -n "$CMDDESC" ] || CMDDESC="The $CMDNAME command"
[ -n "$CMDENTRY" ] || CMDENTRY="cmd_${CMDNAME}"
[ -n "$HELPENTRY" ] || HELPENTRY="help_cmd_${CMDNAME}"
[ -n "$CMDTYPE" ] || CMDTYPE="module"
[ -n "$OUTDIR" ] || OUTDIR="${CMDTYPE}s/${CMDNAME}"
 
# Builtins typically only need to be available in interactive mode,
# set the default accordingly.
[ -n "$CMDRESTRICT" ] || {
	[ "$CMDTYPE" = "module" ] && CMDRESTRICT="both"
	[ "$CMDTYPE" = "builtin" ] && CMDRESTRICT="interactive"
}
 
# Set the restriction level as the structure expects to see it
case "$CMDRESTRICT" in
	0 | both)
		CMDRESTRICT="0"
	;;
	1 | non-interactive)
		CMDRESTRICT="1"
	;;
	-1 | interactive)
		CMDRESTRICT="-1"
	;;
	*)
		usage
		exit 1
	;;
esac
 
# Do a little sanity
[ -d $OUTDIR ] && {
	echo "$OUTDIR already exists, remove it to proceed."
	exit 1
}
 
mkdir -p ${OUTDIR} >/dev/null 2>&1 || {
	echo "Could not create ${OUTDIR}, aborting!"
	exit 1
}
 
# Generate the files and inform on how to include them based on options
generate_code
 
exit 0
 
 

Rev 3284	Rev 3301
1	#!/bin/sh	1	#!/bin/sh
2	# Copyright (C) 2008 Tim Post - All Rights Reserved	2	# Copyright (C) 2008 Tim Post - All Rights Reserved
3	# Redistribution and use in source and binary forms, with or without	3	# Redistribution and use in source and binary forms, with or without
4	# modification, are permitted provided that the following conditions are met:	4	# modification, are permitted provided that the following conditions are met:
5	#	5	#
6	# Redistributions of source code must retain the above copyright notice, this	6	# Redistributions of source code must retain the above copyright notice, this
7	# list of conditions and the following disclaimer.	7	# list of conditions and the following disclaimer.
8	#	8	#
9	# Redistributions in binary form must reproduce the above copyright notice,	9	# Redistributions in binary form must reproduce the above copyright notice,
10	# this list of conditions and the following disclaimer in the documentation	10	# this list of conditions and the following disclaimer in the documentation
11	# and/or other materials provided with the distribution.	11	# and/or other materials provided with the distribution.
12	#	12	#
13	# Neither the name of the original program's authors nor the names of its	13	# Neither the name of the original program's authors nor the names of its
14	# contributors may be used to endorse or promote products derived from this	14	# contributors may be used to endorse or promote products derived from this
15	# software without specific prior written permission.	15	# software without specific prior written permission.
16	#	16	#
17	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"	17	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
18	# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE	18	# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19	# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE	19	# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20	# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE	20	# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
21	# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR	21	# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
22	# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF	22	# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23	# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS	23	# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24	# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN	24	# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
25	# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)	25	# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26	# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE	26	# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
27	# POSSIBILITY OF SUCH DAMAGE.	27	# POSSIBILITY OF SUCH DAMAGE.
28		28
29	# Script to generate skeletal files for a new command	29	# Script to generate skeletal files for a new command
30	# Uses `getopt', not quite a bash-ism but might be	30	# Uses `getopt', not quite a bash-ism but might be
31	# lacking on some legacy systems.	31	# lacking on some legacy systems.
32		32
33	# If your shell does not support eval, shift (x) or	33	# If your shell does not support eval, shift (x) or
34	# here-now documents, sorry :)	34	# here-now documents, sorry :)
35		35
36	usage()	36	usage()
37	{	37	{
38	def="$DEFAULT_COMMAND"	38	def="$DEFAULT_COMMAND"
39	cat << EOF	39	cat << EOF
40	\`$PROGNAME' generates skeletal command files to simplify adding commands	40	\`$PROGNAME' generates skeletal command files to simplify adding commands
41	Usage: $PROGNAME [options] <location>	41	Usage: $PROGNAME [options] <location>
42	Options:	42	Options:
43	-n, --name Name of the command (default: ${def})	43	-n, --name Name of the command (default: ${def})
44	-d, --desc Short (20 30 chars) description of the command	44	-d, --desc Short (20 30 chars) description of the command
45	(def: "The $def command")	45	(def: "The $def command")
46	-e, --entry Entry function of the command (def: cmd_${def})	46	-e, --entry Entry function of the command (def: cmd_${def})
47	-h, --help-entry Entry function for command help (def: help_cmd_${def})	47	-h, --help-entry Entry function for command help (def: help_cmd_${def})
48	-a, --alias Alias (nickname) for this command (def: none)	48	-a, --alias Alias (nickname) for this command (def: none)
49	-r, --restrict Restriction level (interactive, non-interactive, both)	49	-r, --restrict Restriction level (interactive, non-interactive, both)
50	(def: module is both, builtin is interactive only)	50	(def: module is both, builtin is interactive only)
51	-t, --type Type of command (module or builtin) (def: module)	51	-t, --type Type of command (module or builtin) (def: module)
52	-H, --help This help summary	52	-H, --help This help summary
53	-V, --version Print $PROGNAME version and exit normally	53	-V, --version Print $PROGNAME version and exit normally
54		54
55	Notes:	55	Notes:
56	You must supply at least the name of the command.	56	You must supply at least the name of the command.
57		57
58	If you do not specify a location (i.e. modules/foo), the command will be	58	If you do not specify a location (i.e. modules/foo), the command will be
59	created in modules/command_name or builtins/command_name depending on your	59	created in modules/command_name or builtins/command_name depending on your
60	selection.	60	selection.
61		61
62	This script will only create skeletal files and inform you what headers	62	This script will only create skeletal files and inform you what headers
63	need to be modified to incorporate the command. You will also have to	63	need to be modified to incorporate the command. You will also have to
64	manually update the main Makefile.	64	manually update the main Makefile.
65		65
66	This script is intended only to be a convenience for developers. Example use:	66	This script is intended only to be a convenience for developers. Example use:
67	$PROGNAME -n foo -d "Foo power" -a bar -r both -t module modules/foo	67	$PROGNAME -n foo -d "Foo power" -a bar -r both -t module modules/foo
68		68
69	The example would generate a modular command named 'foo', which is also	69	The example would generate a modular command named 'foo', which is also
70	reached by typing 'bar' and available in either interactive or noninteractive	70	reached by typing 'bar' and available in either interactive or noninteractive
71	mode.	71	mode.
72		72
73	Skeletal files do not depend on the autoconf generated "config.h" unless you	73	Skeletal files do not depend on the autoconf generated "config.h" unless you
74	include it. This may or may not be desirable depending on your use.	74	include it. This may or may not be desirable depending on your use.
75		75
76	Report bugs to $PROGMAINT	76	Report bugs to $PROGMAINT
77		77
78	EOF	78	EOF
79	}	79	}
80		80
81	# Convert a string to all uppercase	81	# Convert a string to all uppercase
82	toupper()	82	toupper()
83	{	83	{
84	local str="$1"	84	local str="$1"
85		85
86	echo "${str}" \| tr 'a-z' 'A-Z'	86	echo "${str}" \| tr 'a-z' 'A-Z'
87	}	87	}
88		88
89	# Template stored `here-now' style, this generates all files needed	89	# Template stored `here-now' style, this generates all files needed
90	# for a new command according to arguments passed.	90	# for a new command according to arguments passed.
91	generate_code()	91	generate_code()
92	{	92	{
93	echo "Creating ${OUTDIR}/${CMDNAME}.def ..."	93	echo "Creating ${OUTDIR}/${CMDNAME}.def ..."
94	cat << EOF > ${OUTDIR}/${CMDNAME}.def	94	cat << EOF > ${OUTDIR}/${CMDNAME}.def
95	{	95	{
96	"${CMDNAME}",	96	"${CMDNAME}",
97	"${CMDDESC}",	97	"${CMDDESC}",
98	&${CMDENTRY},	98	&${CMDENTRY},
99	&${HELPENTRY},	99	&${HELPENTRY},
100	${CMDRESTRICT}	100	${CMDRESTRICT}
101	},	101	},
102		102
103	EOF	103	EOF
104	[ -n "${CMDALIAS}" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.def	104	[ -n "${CMDALIAS}" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.def
105	{	105	{
106	"${CMDALIAS}",	106	"${CMDALIAS}",
107	NULL,	107	NULL,
108	&${CMDENTRY},	108	&${CMDENTRY},
109	&${HELPENTRY},	109	&${HELPENTRY},
110	${CMDRESTRICT}	110	${CMDRESTRICT}
111	},	111	},
112		112
113	EOF	113	EOF
114	local defname=$(toupper "${CMDNAME}")	114	local defname=$(toupper "${CMDNAME}")
115	echo "Creating ${OUTDIR}/entry.h ..."	115	echo "Creating ${OUTDIR}/entry.h ..."
116	cat << EOF > ${OUTDIR}/entry.h	116	cat << EOF > ${OUTDIR}/entry.h
117	#ifndef ${defname}_ENTRY_H	117	#ifndef ${defname}_ENTRY_H
118	#define ${defname}_ENTRY_H	118	#define ${defname}_ENTRY_H
119		119
120	EOF	120	EOF
121	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/entry.h	121	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/entry.h
122	/* Entry points for the ${CMDNAME} command */	122	/* Entry points for the ${CMDNAME} command */
123	extern int * ${CMDENTRY}(char **);	123	extern int * ${CMDENTRY}(char **);
124	extern void * ${HELPENTRY}(unsigned int);	124	extern void * ${HELPENTRY}(unsigned int);
125		125
126	#endif /* ${defname}_ENTRY_H */	126	#endif /* ${defname}_ENTRY_H */
127		127
128	EOF	128	EOF
129	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/entry.h	129	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/entry.h
130	/* Pick up cliuser_t */	130	/* Pick up cliuser_t */
131	#include "scli.h"	131	#include "scli.h"
132		132
133	/* Entry points for the ${CMDNAME} command */	133	/* Entry points for the ${CMDNAME} command */
134	extern int * ${CMDENTRY}(char *, cliuser_t );	134	extern int * ${CMDENTRY}(char *, cliuser_t );
135	extern void * ${HELPENTRY}(unsigned int);	135	extern void * ${HELPENTRY}(unsigned int);
136		136
137	#endif /* ${defname}_ENTRY_H */	137	#endif /* ${defname}_ENTRY_H */
138		138
139	EOF	139	EOF
140	echo "Creating ${OUTDIR}/${CMDNAME}.h ..."	140	echo "Creating ${OUTDIR}/${CMDNAME}.h ..."
141	cat << EOF > ${OUTDIR}/${CMDNAME}.h	141	cat << EOF > ${OUTDIR}/${CMDNAME}.h
142	#ifndef ${defname}_H	142	#ifndef ${defname}_H
143	#define ${defname}_H	143	#define ${defname}_H
144		144
145	/* Prototypes for the ${CMDNAME} command, excluding entry points */	145	/* Prototypes for the ${CMDNAME} command, excluding entry points */
146		146
147		147
148	#endif /* ${defname}_H */	148	#endif /* ${defname}_H */
149		149
150	EOF	150	EOF
151	echo "Creating ${OUTDIR}/${CMDNAME}.c ..."	151	echo "Creating ${OUTDIR}/${CMDNAME}.c ..."
152	cat << EOF > ${OUTDIR}/${CMDNAME}.c	152	cat << EOF > ${OUTDIR}/${CMDNAME}.c
153	/* Automatically generated by ${PROGNAME} on ${TIMESTAMP}	153	/* Automatically generated by ${PROGNAME} on ${TIMESTAMP}
154	* This is machine generated output. The author of ${PROGNAME} claims no	154	* This is machine generated output. The author of ${PROGNAME} claims no
155	* copyright over the contents of this file. Where legally permitted, the	155	* copyright over the contents of this file. Where legally permitted, the
156	* contents herein are donated to the public domain.	156	* contents herein are donated to the public domain.
157	*	157	*
158	* You should apply any license and copyright that you wish to this file,	158	* You should apply any license and copyright that you wish to this file,
159	* replacing this header in its entirety. */	159	* replacing this header in its entirety. */
160		160
161	#include <stdio.h>	161	#include <stdio.h>
162	#include <stdlib.h>	162	#include <stdlib.h>
163	#include "config.h"	163	#include "config.h"
-		164	#include "util.h"
164	#include "errors.h"	165	#include "errors.h"
165	#include "entry.h"	166	#include "entry.h"
166	#include "${CMDNAME}.h"	167	#include "${CMDNAME}.h"
167	#include "cmds.h"	168	#include "cmds.h"
168		169
169	static char *cmdname = "${CMDNAME}";	170	static char *cmdname = "${CMDNAME}";
170		171
171	/* Dispays help for ${CMDNAME} in various levels */	172	/* Dispays help for ${CMDNAME} in various levels */
172	void * ${HELPENTRY}(unsigned int level)	173	void * ${HELPENTRY}(unsigned int level)
173	{	174	{
174	printf("This is the %s help for '%s'.\n",	175	printf("This is the %s help for '%s'.\n",
175	level ? EXT_HELP : SHORT_HELP, cmdname);	176	level ? EXT_HELP : SHORT_HELP, cmdname);
176	return CMD_VOID;	177	return CMD_VOID;
177	}	178	}
178		179
179	EOF	180	EOF
180	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c	181	[ "${CMDTYPE}" = "module" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c
181	/* Main entry point for ${CMDNAME}, accepts an array of arguments */	182	/* Main entry point for ${CMDNAME}, accepts an array of arguments */
182	int * ${CMDENTRY}(char **argv)	183	int * ${CMDENTRY}(char **argv)
183	EOF	184	EOF
184	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c	185	[ "${CMDTYPE}" = "builtin" ] && cat << EOF >> ${OUTDIR}/${CMDNAME}.c
185	/* Main entry point for ${CMDNAME}, accepts an array of arguments and a	186	/* Main entry point for ${CMDNAME}, accepts an array of arguments and a
186	* pointer to the cliuser_t structure */	187	* pointer to the cliuser_t structure */
187	int * ${CMDENTRY}(char *argv, cliuser_t usr)	188	int * ${CMDENTRY}(char *argv, cliuser_t usr)
188	EOF	189	EOF
189	cat << EOF >> ${OUTDIR}/${CMDNAME}.c	190	cat << EOF >> ${OUTDIR}/${CMDNAME}.c
190	{	191	{
191	unsigned int argc;	192	unsigned int argc;
192	unsigned int i;	193	unsigned int i;
193		194
194	/* Count the arguments */	195	/* Count the arguments */
195	for (argc = 0; argv[argc] != NULL; argc ++);	196	for (argc = 0; argv[argc] != NULL; argc ++);
196		197
197	printf("%s %s\n", TEST_ANNOUNCE, cmdname);	198	printf("%s %s\n", TEST_ANNOUNCE, cmdname);
198	printf("%d arguments passed to %s", argc - 1, cmdname);	199	printf("%d arguments passed to %s", argc - 1, cmdname);
199		200
200	if (argc < 2) {	201	if (argc < 2) {
201	printf("\n");	202	printf("\n");
202	return CMD_SUCCESS;	203	return CMD_SUCCESS;
203	}	204	}
204		205
205	printf(":\n");	206	printf(":\n");
206	for (i = 1; i < argc; i++)	207	for (i = 1; i < argc; i++)
207	printf("[%d] -> %s\n", i, argv[i]);	208	printf("[%d] -> %s\n", i, argv[i]);
208		209
209	return CMD_SUCCESS;	210	return CMD_SUCCESS;
210	}	211	}
211		212
212	EOF	213	EOF
213	printf "Done.\n\nYou should now modify %ss/%ss.h and ../Makefile" \	214	printf "Done.\n\nYou should now modify %ss/%ss.h and ../Makefile" \
214	"${CMDTYPE}" "${CMDTYPE}"	215	"${CMDTYPE}" "${CMDTYPE}"
215	printf " to include your new command.\n"	216	printf " to include your new command.\n"
216	[ -n "$CMDALIAS" ] && {	217	[ -n "$CMDALIAS" ] && {
217	printf "\nYou should also modify %ss/%s_aliases.h and " \	218	printf "\nYou should also modify %ss/%s_aliases.h and " \
218	"${CMDTYPE}" "${CMDTYPE}"	219	"${CMDTYPE}" "${CMDTYPE}"
219	printf "add %s as an alias for %s\n" \	220	printf "add %s as an alias for %s\n" \
220	"${CMDALIAS}" "${CMDNAME}"	221	"${CMDALIAS}" "${CMDNAME}"
221	}	222	}
222	printf "\nOnce completed, re-run make\n\n"	223	printf "\nOnce completed, re-run make\n\n"
223	}	224	}
224		225
225	# Main program	226	# Main program
226		227
227	TIMESTAMP="$(date)"	228	TIMESTAMP="$(date)"
228	PROGNAME=$(basename $0)	229	PROGNAME=$(basename $0)
229	PROGVER="0.0.1"	230	PROGVER="0.0.1"
230	PROGMAINT="Tim Post <echo@echoreply.us>"	231	PROGMAINT="Tim Post <echo@echoreply.us>"
231	DEFAULT_COMMAND="cmdname"	232	DEFAULT_COMMAND="cmdname"
232		233
233	# We need at least one	234	# We need at least one
234	[ $# = 0 ] && usage && exit 1;	235	[ $# = 0 ] && usage && exit 1;
235		236
236	TEMP=$(getopt -o n:d:e:h:a:r:t:HV \	237	TEMP=$(getopt -o n:d:e:h:a:r:t:HV \
237	--long name:,desc:,entry:,help-entry:,alias:,restrict:,type:,help,version \	238	--long name:,desc:,entry:,help-entry:,alias:,restrict:,type:,help,version \
238	-- "$@") \|\| {	239	-- "$@") \|\| {
239	echo "Try $PROGNAME --help for help"	240	echo "Try $PROGNAME --help for help"
240	}	241	}
241		242
242	eval set -- "$TEMP"	243	eval set -- "$TEMP"
243		244
244	while true; do	245	while true; do
245	case "$1" in	246	case "$1" in
246	-n \| --name)	247	-n \| --name)
247	CMDNAME="$2"	248	CMDNAME="$2"
248	shift 2	249	shift 2
249	continue	250	continue
250	;;	251	;;
251	-d \| --desc)	252	-d \| --desc)
252	CMDDESC="$2"	253	CMDDESC="$2"
253	shift 2	254	shift 2
254	continue	255	continue
255	;;	256	;;
256	-e \| --entry)	257	-e \| --entry)
257	CMDENTRY="$2"	258	CMDENTRY="$2"
258	shift 2	259	shift 2
259	continue	260	continue
260	;;	261	;;
261	-h \| --help-entry)	262	-h \| --help-entry)
262	HELPENTRY="$2"	263	HELPENTRY="$2"
263	shift 2	264	shift 2
264	continue	265	continue
265	;;	266	;;
266	-a \| --alias)	267	-a \| --alias)
267	CMDALIAS="$2"	268	CMDALIAS="$2"
268	shift 2	269	shift 2
269	continue	270	continue
270	;;	271	;;
271	-r \| --restrict)	272	-r \| --restrict)
272	CMDRESTRICT="$2"	273	CMDRESTRICT="$2"
273	shift 2	274	shift 2
274	continue	275	continue
275	;;	276	;;
276	-t \| --type)	277	-t \| --type)
277	CMDTYPE="$2"	278	CMDTYPE="$2"
278	shift 2	279	shift 2
279	continue	280	continue
280	;;	281	;;
281	-H \| --help)	282	-H \| --help)
282	usage	283	usage
283	exit 0	284	exit 0
284	;;	285	;;
285	-V \| --version)	286	-V \| --version)
286	echo "$PROGVER"	287	echo "$PROGVER"
287	exit 0	288	exit 0
288	;;	289	;;
289	--)	290	--)
290	break	291	break
291	;;	292	;;
292	esac	293	esac
293	done	294	done
294		295
295	# Pick up a location if one was specified	296	# Pick up a location if one was specified
296	eval set -- "$*"	297	eval set -- "$*"
297	[ -n "$2" ] && OUTDIR="$2"	298	[ -n "$2" ] && OUTDIR="$2"
298		299
299	# Fill in defaults for whatever was not specified	300	# Fill in defaults for whatever was not specified
300	[ -n "$CMDNAME" ] \|\| CMDNAME="$DEFAULT_COMMAND"	301	[ -n "$CMDNAME" ] \|\| CMDNAME="$DEFAULT_COMMAND"
301	[ -n "$CMDDESC" ] \|\| CMDDESC="The $CMDNAME command"	302	[ -n "$CMDDESC" ] \|\| CMDDESC="The $CMDNAME command"
302	[ -n "$CMDENTRY" ] \|\| CMDENTRY="cmd_${CMDNAME}"	303	[ -n "$CMDENTRY" ] \|\| CMDENTRY="cmd_${CMDNAME}"
303	[ -n "$HELPENTRY" ] \|\| HELPENTRY="help_cmd_${CMDNAME}"	304	[ -n "$HELPENTRY" ] \|\| HELPENTRY="help_cmd_${CMDNAME}"
304	[ -n "$CMDTYPE" ] \|\| CMDTYPE="module"	305	[ -n "$CMDTYPE" ] \|\| CMDTYPE="module"
305	[ -n "$OUTDIR" ] \|\| OUTDIR="${CMDTYPE}s/${CMDNAME}"	306	[ -n "$OUTDIR" ] \|\| OUTDIR="${CMDTYPE}s/${CMDNAME}"
306		307
307	# Builtins typically only need to be available in interactive mode,	308	# Builtins typically only need to be available in interactive mode,
308	# set the default accordingly.	309	# set the default accordingly.
309	[ -n "$CMDRESTRICT" ] \|\| {	310	[ -n "$CMDRESTRICT" ] \|\| {
310	[ "$CMDTYPE" = "module" ] && CMDRESTRICT="both"	311	[ "$CMDTYPE" = "module" ] && CMDRESTRICT="both"
311	[ "$CMDTYPE" = "builtin" ] && CMDRESTRICT="interactive"	312	[ "$CMDTYPE" = "builtin" ] && CMDRESTRICT="interactive"
312	}	313	}
313		314
314	# Set the restriction level as the structure expects to see it	315	# Set the restriction level as the structure expects to see it
315	case "$CMDRESTRICT" in	316	case "$CMDRESTRICT" in
316	0 \| both)	317	0 \| both)
317	CMDRESTRICT="0"	318	CMDRESTRICT="0"
318	;;	319	;;
319	1 \| non-interactive)	320	1 \| non-interactive)
320	CMDRESTRICT="1"	321	CMDRESTRICT="1"
321	;;	322	;;
322	-1 \| interactive)	323	-1 \| interactive)
323	CMDRESTRICT="-1"	324	CMDRESTRICT="-1"
324	;;	325	;;
325	*)	326	*)
326	usage	327	usage
327	exit 1	328	exit 1
328	;;	329	;;
329	esac	330	esac
330		331
331	# Do a little sanity	332	# Do a little sanity
332	[ -d $OUTDIR ] && {	333	[ -d $OUTDIR ] && {
333	echo "$OUTDIR already exists, remove it to proceed."	334	echo "$OUTDIR already exists, remove it to proceed."
334	exit 1	335	exit 1
335	}	336	}
336		337
337	mkdir -p ${OUTDIR} >/dev/null 2>&1 \|\| {	338	mkdir -p ${OUTDIR} >/dev/null 2>&1 \|\| {
338	echo "Could not create ${OUTDIR}, aborting!"	339	echo "Could not create ${OUTDIR}, aborting!"
339	exit 1	340	exit 1
340	}	341	}
341		342
342	# Generate the files and inform on how to include them based on options	343	# Generate the files and inform on how to include them based on options
343	generate_code	344	generate_code
344		345
345	exit 0	346	exit 0
346		347
347		348

Subversion Repositories HelenOS

(root)/trunk/uspace/app/bdsh/cmds/mknewcmd @ 4439 – Rev 3284 → 3301