WebSVN – HelenOS – Diff – /trunk/kernel/generic/src/main/main.c


/*
 * Copyright (c) 2001-2004 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/** @addtogroup main
 * @{
 */
 
/**
 * @file
 * @brief   Main initialization kernel function for all processors.
 *
 * During kernel boot, all processors, after architecture dependent
 * initialization, start executing code found in this file. After
 * bringing up all subsystems, control is passed to scheduler().
 *
 * The bootstrap processor starts executing main_bsp() while
 * the application processors start executing main_ap().
 *
 * @see scheduler()
 * @see main_bsp()
 * @see main_ap()
 */
 
#include <arch/asm.h>
#include <context.h>
#include <print.h>
#include <panic.h>
#include <debug.h>
#include <config.h>
#include <time/clock.h>
#include <time/timeout.h>
#include <proc/scheduler.h>
#include <proc/thread.h>
#include <proc/task.h>
#include <proc/tasklet.h>
#include <main/kinit.h>
#include <main/version.h>
#include <console/kconsole.h>
#include <cpu.h>
#include <align.h>
#include <interrupt.h>
#include <mm/frame.h>
#include <mm/page.h>
#include <genarch/mm/page_pt.h>
#include <mm/tlb.h>
#include <mm/as.h>
#include <mm/slab.h>
#include <synch/waitq.h>
#include <synch/futex.h>
#include <arch/arch.h>
#include <arch.h>
#include <arch/faddr.h>
#include <ipc/ipc.h>
#include <macros.h>
#include <adt/btree.h>
#include <console/klog.h>
#include <smp/smp.h>
#include <ddi/ddi.h>
 
/** Global configuration structure. */
config_t config;
 
/** Initial user-space tasks */
init_t init = {
    .cnt = 0
};
 
/** Boot allocations. */
ballocs_t ballocs = {
    .base = NULL,
    .size = 0
};
 
context_t ctx;
 
/*
 * These 'hardcoded' variables will be intialized by
 * the linker or the low level assembler code with
 * appropriate sizes and addresses.
 */
 
/**< Virtual address of where the kernel is loaded. */
uintptr_t hardcoded_load_address = 0;
/**< Size of the kernel code in bytes. */
size_t hardcoded_ktext_size = 0;
/**< Size of the kernel data in bytes. */
size_t hardcoded_kdata_size = 0;
/**< Lowest safe stack virtual address. */
uintptr_t stack_safe = 0;      
 
void main_bsp(void);
void main_ap(void);
 
/*
 * These two functions prevent stack from underflowing during the
 * kernel boot phase when SP is set to the very top of the reserved
 * space. The stack could get corrupted by a fooled compiler-generated
 * pop sequence otherwise.
 */
static void main_bsp_separated_stack(void);
#ifdef CONFIG_SMP
static void main_ap_separated_stack(void);
#endif
 
#define CONFIG_STACK_SIZE   ((1 << STACK_FRAMES) * STACK_SIZE)
 
/** Main kernel routine for bootstrap CPU.
 *
 * Initializes the kernel by bootstrap CPU.
 * This function passes control directly to
 * main_bsp_separated_stack().
 *
 * Assuming interrupts_disable().
 *
 */
void main_bsp(void)
{
    config.cpu_count = 1;
    config.cpu_active = 1;
   
    config.base = hardcoded_load_address;
    config.kernel_size = ALIGN_UP(hardcoded_ktext_size +
        hardcoded_kdata_size, PAGE_SIZE);
    config.stack_size = CONFIG_STACK_SIZE;
   
    /* Initialy the stack is placed just after the kernel */
    config.stack_base = config.base + config.kernel_size;
   
    /* Avoid placing stack on top of init */
    count_t i;
    for (i = 0; i < init.cnt; i++) {
        if (PA_overlaps(config.stack_base, config.stack_size,
            init.tasks[i].addr, init.tasks[i].size))
            config.stack_base = ALIGN_UP(init.tasks[i].addr +
                init.tasks[i].size, config.stack_size);
    }
 
    /* Avoid placing stack on top of boot allocations. */
    if (ballocs.size) {
        if (PA_overlaps(config.stack_base, config.stack_size,
            ballocs.base, ballocs.size))
            config.stack_base = ALIGN_UP(ballocs.base +
                ballocs.size, PAGE_SIZE);
    }
   
    if (config.stack_base < stack_safe)
        config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);
   
    context_save(&ctx);
    context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,
        THREAD_STACK_SIZE);
    context_restore(&ctx);
    /* not reached */
}
 
 
/** Main kernel routine for bootstrap CPU using new stack.
 *
 * Second part of main_bsp().
 *
 */
void main_bsp_separated_stack(void)
{
    task_t *k;
    thread_t *t;
    count_t i;
   
    the_initialize(THE);
 
    /*
     * kconsole data structures must be initialized very early
     * because other subsystems will register their respective
     * commands.
     */
    kconsole_init();
   
    /*
     * Exception handler initialization, before architecture
     * starts adding its own handlers
     */
    exc_init();
 
    /*
     * Memory management subsystems initialization.
     */
    arch_pre_mm_init();
    frame_init();      
    /* Initialize at least 1 memory segment big enough for slab to work. */
    slab_cache_init();
    btree_init();
    as_init();
    page_init();
    tlb_init();
    ddi_init();
    tasklet_init();
    arch_post_mm_init();
   
    version_print();
    printf("kernel: %.*p hardcoded_ktext_size=%zd KB, "
        "hardcoded_kdata_size=%zd KB\n", sizeof(uintptr_t) * 2,
        config.base, SIZE2KB(hardcoded_ktext_size),
        SIZE2KB(hardcoded_kdata_size));
    printf("stack:  %.*p size=%zd KB\n", sizeof(uintptr_t) * 2,
        config.stack_base, SIZE2KB(config.stack_size));
   
    arch_pre_smp_init();
    smp_init();
    /* Slab must be initialized after we know the number of processors. */
    slab_enable_cpucache();
   
    printf("Detected %zu CPU(s), %llu MB free memory\n",
        config.cpu_count, SIZE2MB(zone_total_size()));
    cpu_init();
   
    calibrate_delay_loop();
    clock_counter_init();
    timeout_init();
    scheduler_init();
    task_init();
    thread_init();
    futex_init();
    klog_init();
   
    if (init.cnt > 0) {
        for (i = 0; i < init.cnt; i++)
            printf("init[%zd].addr=%.*p, init[%zd].size=%zd\n", i,
                sizeof(uintptr_t) * 2, init.tasks[i].addr, i,
                init.tasks[i].size);
    } else
        printf("No init binaries found\n");
   
    ipc_init();
 
    /*
     * Create kernel task.
     */
    k = task_create(AS_KERNEL, "kernel");
    if (!k)
        panic("can't create kernel task\n");
   
    /*
     * Create the first thread.
     */
    t = thread_create(kinit, NULL, k, 0, "kinit", true);
    if (!t)
        panic("can't create kinit thread\n");
    thread_ready(t);
   
    /*
     * This call to scheduler() will return to kinit,
     * starting the thread of kernel threads.
     */
    scheduler();
    /* not reached */
}
 
 
#ifdef CONFIG_SMP
/** Main kernel routine for application CPUs.
 *
 * Executed by application processors, temporary stack
 * is at ctx.sp which was set during BSP boot.
 * This function passes control directly to
 * main_ap_separated_stack().
 *
 * Assuming interrupts_disable()'d.
 *
 */
void main_ap(void)
{
    /*
     * Incrementing the active CPU counter will guarantee that the
     * *_init() functions can find out that they need to
     * do initialization for AP only.
     */
    config.cpu_active++;
 
    /*
     * The THE structure is well defined because ctx.sp is used as stack.
     */
    the_initialize(THE);
   
    arch_pre_mm_init();
    frame_init();
    page_init();
    tlb_init();
    arch_post_mm_init();
   
    cpu_init();
    calibrate_delay_loop();
    arch_post_cpu_init();
 
    the_copy(THE, (the_t *) CPU->stack);
 
    /*
     * If we woke kmp up before we left the kernel stack, we could
     * collide with another CPU coming up. To prevent this, we
     * switch to this cpu's private stack prior to waking kmp up.
     */
    context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),
        (uintptr_t) CPU->stack, CPU_STACK_SIZE);
    context_restore(&CPU->saved_context);
    /* not reached */
}
 
 
/** Main kernel routine for application CPUs using new stack.
 *
 * Second part of main_ap().
 *
 */
void main_ap_separated_stack(void)
{
    /*
     * Configure timeouts for this cpu.
     */
    timeout_init();
 
    waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
    scheduler();
    /* not reached */
}
#endif /* CONFIG_SMP */
 
/** @}
 */
 

Rev 2745	Rev 2746
1	/*	1	/*
2	* Copyright (c) 2001-2004 Jakub Jermar	2	* Copyright (c) 2001-2004 Jakub Jermar
3	* All rights reserved.	3	* All rights reserved.
4	*	4	*
5	* Redistribution and use in source and binary forms, with or without	5	* Redistribution and use in source and binary forms, with or without
6	* modification, are permitted provided that the following conditions	6	* modification, are permitted provided that the following conditions
7	* are met:	7	* are met:
8	*	8	*
9	* - Redistributions of source code must retain the above copyright	9	* - Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.	10	* notice, this list of conditions and the following disclaimer.
11	* - Redistributions in binary form must reproduce the above copyright	11	* - Redistributions in binary form must reproduce the above copyright
12	* notice, this list of conditions and the following disclaimer in the	12	* notice, this list of conditions and the following disclaimer in the
13	* documentation and/or other materials provided with the distribution.	13	* documentation and/or other materials provided with the distribution.
14	* - The name of the author may not be used to endorse or promote products	14	* - The name of the author may not be used to endorse or promote products
15	* derived from this software without specific prior written permission.	15	* derived from this software without specific prior written permission.
16	*	16	*
17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	*/	27	*/
28		28
29	/** @addtogroup main	29	/** @addtogroup main
30	* @{	30	* @{
31	*/	31	*/
32		32
33	/**	33	/**
34	* @file	34	* @file
35	* @brief Main initialization kernel function for all processors.	35	* @brief Main initialization kernel function for all processors.
36	*	36	*
37	* During kernel boot, all processors, after architecture dependent	37	* During kernel boot, all processors, after architecture dependent
38	* initialization, start executing code found in this file. After	38	* initialization, start executing code found in this file. After
39	* bringing up all subsystems, control is passed to scheduler().	39	* bringing up all subsystems, control is passed to scheduler().
40	*	40	*
41	* The bootstrap processor starts executing main_bsp() while	41	* The bootstrap processor starts executing main_bsp() while
42	* the application processors start executing main_ap().	42	* the application processors start executing main_ap().
43	*	43	*
44	* @see scheduler()	44	* @see scheduler()
45	* @see main_bsp()	45	* @see main_bsp()
46	* @see main_ap()	46	* @see main_ap()
47	*/	47	*/
48		48
49	#include <arch/asm.h>	49	#include <arch/asm.h>
50	#include <context.h>	50	#include <context.h>
51	#include <print.h>	51	#include <print.h>
52	#include <panic.h>	52	#include <panic.h>
53	#include <debug.h>	53	#include <debug.h>
54	#include <config.h>	54	#include <config.h>
55	#include <time/clock.h>	55	#include <time/clock.h>
56	#include <time/timeout.h>	56	#include <time/timeout.h>
57	#include <proc/scheduler.h>	57	#include <proc/scheduler.h>
58	#include <proc/thread.h>	58	#include <proc/thread.h>
59	#include <proc/task.h>	59	#include <proc/task.h>
-		60	#include <proc/tasklet.h>
60	#include <main/kinit.h>	61	#include <main/kinit.h>
61	#include <main/version.h>	62	#include <main/version.h>
62	#include <console/kconsole.h>	63	#include <console/kconsole.h>
63	#include <cpu.h>	64	#include <cpu.h>
64	#include <align.h>	65	#include <align.h>
65	#include <interrupt.h>	66	#include <interrupt.h>
66	#include <mm/frame.h>	67	#include <mm/frame.h>
67	#include <mm/page.h>	68	#include <mm/page.h>
68	#include <genarch/mm/page_pt.h>	69	#include <genarch/mm/page_pt.h>
69	#include <mm/tlb.h>	70	#include <mm/tlb.h>
70	#include <mm/as.h>	71	#include <mm/as.h>
71	#include <mm/slab.h>	72	#include <mm/slab.h>
72	#include <synch/waitq.h>	73	#include <synch/waitq.h>
73	#include <synch/futex.h>	74	#include <synch/futex.h>
74	#include <arch/arch.h>	75	#include <arch/arch.h>
75	#include <arch.h>	76	#include <arch.h>
76	#include <arch/faddr.h>	77	#include <arch/faddr.h>
77	#include <ipc/ipc.h>	78	#include <ipc/ipc.h>
78	#include <macros.h>	79	#include <macros.h>
79	#include <adt/btree.h>	80	#include <adt/btree.h>
80	#include <console/klog.h>	81	#include <console/klog.h>
81	#include <smp/smp.h>	82	#include <smp/smp.h>
82	#include <ddi/ddi.h>	83	#include <ddi/ddi.h>
83		84
84	/** Global configuration structure. */	85	/** Global configuration structure. */
85	config_t config;	86	config_t config;
86		87
87	/** Initial user-space tasks */	88	/** Initial user-space tasks */
88	init_t init = {	89	init_t init = {
89	.cnt = 0	90	.cnt = 0
90	};	91	};
91		92
92	/** Boot allocations. */	93	/** Boot allocations. */
93	ballocs_t ballocs = {	94	ballocs_t ballocs = {
94	.base = NULL,	95	.base = NULL,
95	.size = 0	96	.size = 0
96	};	97	};
97		98
98	context_t ctx;	99	context_t ctx;
99		100
100	/*	101	/*
101	* These 'hardcoded' variables will be intialized by	102	* These 'hardcoded' variables will be intialized by
102	* the linker or the low level assembler code with	103	* the linker or the low level assembler code with
103	* appropriate sizes and addresses.	104	* appropriate sizes and addresses.
104	*/	105	*/
-		106
105	uintptr_t hardcoded_load_address = 0; /**< Virtual address of where the kernel	107	/*< Virtual address of where the kernel is loaded. /
106	* is loaded. */	108	uintptr_t hardcoded_load_address = 0;
107	size_t hardcoded_ktext_size = 0; /**< Size of the kernel code in bytes.	109	/*< Size of the kernel code in bytes. /
108	*/	110	size_t hardcoded_ktext_size = 0;
109	size_t hardcoded_kdata_size = 0; /**< Size of the kernel data in bytes.	111	/*< Size of the kernel data in bytes. /
110	*/	112	size_t hardcoded_kdata_size = 0;
111	uintptr_t stack_safe = 0; /**< Lowest safe stack virtual address.	113	/*< Lowest safe stack virtual address. /
112	*/	114	uintptr_t stack_safe = 0;
113		115
114	void main_bsp(void);	116	void main_bsp(void);
115	void main_ap(void);	117	void main_ap(void);
116		118
117	/*	119	/*
118	* These two functions prevent stack from underflowing during the	120	* These two functions prevent stack from underflowing during the
119	* kernel boot phase when SP is set to the very top of the reserved	121	* kernel boot phase when SP is set to the very top of the reserved
120	* space. The stack could get corrupted by a fooled compiler-generated	122	* space. The stack could get corrupted by a fooled compiler-generated
121	* pop sequence otherwise.	123	* pop sequence otherwise.
122	*/	124	*/
123	static void main_bsp_separated_stack(void);	125	static void main_bsp_separated_stack(void);
124	#ifdef CONFIG_SMP	126	#ifdef CONFIG_SMP
125	static void main_ap_separated_stack(void);	127	static void main_ap_separated_stack(void);
126	#endif	128	#endif
127		129
128	#define CONFIG_STACK_SIZE ((1 << STACK_FRAMES) * STACK_SIZE)	130	#define CONFIG_STACK_SIZE ((1 << STACK_FRAMES) * STACK_SIZE)
129		131
130	/** Main kernel routine for bootstrap CPU.	132	/** Main kernel routine for bootstrap CPU.
131	*	133	*
132	* Initializes the kernel by bootstrap CPU.	134	* Initializes the kernel by bootstrap CPU.
133	* This function passes control directly to	135	* This function passes control directly to
134	* main_bsp_separated_stack().	136	* main_bsp_separated_stack().
135	*	137	*
136	* Assuming interrupts_disable().	138	* Assuming interrupts_disable().
137	*	139	*
138	*/	140	*/
139	void main_bsp(void)	141	void main_bsp(void)
140	{	142	{
141	config.cpu_count = 1;	143	config.cpu_count = 1;
142	config.cpu_active = 1;	144	config.cpu_active = 1;
143		145
144	config.base = hardcoded_load_address;	146	config.base = hardcoded_load_address;
145	config.kernel_size = ALIGN_UP(hardcoded_ktext_size +	147	config.kernel_size = ALIGN_UP(hardcoded_ktext_size +
146	hardcoded_kdata_size, PAGE_SIZE);	148	hardcoded_kdata_size, PAGE_SIZE);
147	config.stack_size = CONFIG_STACK_SIZE;	149	config.stack_size = CONFIG_STACK_SIZE;
148		150
149	/* Initialy the stack is placed just after the kernel */	151	/* Initialy the stack is placed just after the kernel */
150	config.stack_base = config.base + config.kernel_size;	152	config.stack_base = config.base + config.kernel_size;
151		153
152	/* Avoid placing stack on top of init */	154	/* Avoid placing stack on top of init */
153	count_t i;	155	count_t i;
154	for (i = 0; i < init.cnt; i++) {	156	for (i = 0; i < init.cnt; i++) {
155	if (PA_overlaps(config.stack_base, config.stack_size,	157	if (PA_overlaps(config.stack_base, config.stack_size,
156	init.tasks[i].addr, init.tasks[i].size))	158	init.tasks[i].addr, init.tasks[i].size))
157	config.stack_base = ALIGN_UP(init.tasks[i].addr +	159	config.stack_base = ALIGN_UP(init.tasks[i].addr +
158	init.tasks[i].size, config.stack_size);	160	init.tasks[i].size, config.stack_size);
159	}	161	}
160		162
161	/* Avoid placing stack on top of boot allocations. */	163	/* Avoid placing stack on top of boot allocations. */
162	if (ballocs.size) {	164	if (ballocs.size) {
163	if (PA_overlaps(config.stack_base, config.stack_size,	165	if (PA_overlaps(config.stack_base, config.stack_size,
164	ballocs.base, ballocs.size))	166	ballocs.base, ballocs.size))
165	config.stack_base = ALIGN_UP(ballocs.base +	167	config.stack_base = ALIGN_UP(ballocs.base +
166	ballocs.size, PAGE_SIZE);	168	ballocs.size, PAGE_SIZE);
167	}	169	}
168		170
169	if (config.stack_base < stack_safe)	171	if (config.stack_base < stack_safe)
170	config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);	172	config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);
171		173
172	context_save(&ctx);	174	context_save(&ctx);
173	context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,	175	context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,
174	THREAD_STACK_SIZE);	176	THREAD_STACK_SIZE);
175	context_restore(&ctx);	177	context_restore(&ctx);
176	/* not reached */	178	/* not reached */
177	}	179	}
178		180
179		181
180	/** Main kernel routine for bootstrap CPU using new stack.	182	/** Main kernel routine for bootstrap CPU using new stack.
181	*	183	*
182	* Second part of main_bsp().	184	* Second part of main_bsp().
183	*	185	*
184	*/	186	*/
185	void main_bsp_separated_stack(void)	187	void main_bsp_separated_stack(void)
186	{	188	{
187	task_t *k;	189	task_t *k;
188	thread_t *t;	190	thread_t *t;
189	count_t i;	191	count_t i;
190		192
191	the_initialize(THE);	193	the_initialize(THE);
192		194
193	/*	195	/*
194	* kconsole data structures must be initialized very early	196	* kconsole data structures must be initialized very early
195	* because other subsystems will register their respective	197	* because other subsystems will register their respective
196	* commands.	198	* commands.
197	*/	199	*/
198	kconsole_init();	200	kconsole_init();
199		201
200	/*	202	/*
201	* Exception handler initialization, before architecture	203	* Exception handler initialization, before architecture
202	* starts adding its own handlers	204	* starts adding its own handlers
203	*/	205	*/
204	exc_init();	206	exc_init();
205		207
206	/*	208	/*
207	* Memory management subsystems initialization.	209	* Memory management subsystems initialization.
208	*/	210	*/
209	arch_pre_mm_init();	211	arch_pre_mm_init();
210	frame_init();	212	frame_init();
211	/* Initialize at least 1 memory segment big enough for slab to work. */	213	/* Initialize at least 1 memory segment big enough for slab to work. */
212	slab_cache_init();	214	slab_cache_init();
213	btree_init();	215	btree_init();
214	as_init();	216	as_init();
215	page_init();	217	page_init();
216	tlb_init();	218	tlb_init();
217	ddi_init();	219	ddi_init();
-		220	tasklet_init();
218	arch_post_mm_init();	221	arch_post_mm_init();
219		222
220	version_print();	223	version_print();
221	printf("kernel: %.*p hardcoded_ktext_size=%zd KB, "	224	printf("kernel: %.*p hardcoded_ktext_size=%zd KB, "
222	"hardcoded_kdata_size=%zd KB\n", sizeof(uintptr_t) * 2,	225	"hardcoded_kdata_size=%zd KB\n", sizeof(uintptr_t) * 2,
223	config.base, SIZE2KB(hardcoded_ktext_size),	226	config.base, SIZE2KB(hardcoded_ktext_size),
224	SIZE2KB(hardcoded_kdata_size));	227	SIZE2KB(hardcoded_kdata_size));
225	printf("stack: %.p size=%zd KB\n", sizeof(uintptr_t) 2,	228	printf("stack: %.p size=%zd KB\n", sizeof(uintptr_t) 2,
226	config.stack_base, SIZE2KB(config.stack_size));	229	config.stack_base, SIZE2KB(config.stack_size));
227		230
228	arch_pre_smp_init();	231	arch_pre_smp_init();
229	smp_init();	232	smp_init();
230	/* Slab must be initialized after we know the number of processors. */	233	/* Slab must be initialized after we know the number of processors. */
231	slab_enable_cpucache();	234	slab_enable_cpucache();
232		235
233	printf("Detected %zu CPU(s), %llu MB free memory\n",	236	printf("Detected %zu CPU(s), %llu MB free memory\n",
234	config.cpu_count, SIZE2MB(zone_total_size()));	237	config.cpu_count, SIZE2MB(zone_total_size()));
235	cpu_init();	238	cpu_init();
236		239
237	calibrate_delay_loop();	240	calibrate_delay_loop();
238	clock_counter_init();	241	clock_counter_init();
239	timeout_init();	242	timeout_init();
240	scheduler_init();	243	scheduler_init();
241	task_init();	244	task_init();
242	thread_init();	245	thread_init();
243	futex_init();	246	futex_init();
244	klog_init();	247	klog_init();
245		248
246	if (init.cnt > 0) {	249	if (init.cnt > 0) {
247	for (i = 0; i < init.cnt; i++)	250	for (i = 0; i < init.cnt; i++)
248	printf("init[%zd].addr=%.*p, init[%zd].size=%zd\n", i,	251	printf("init[%zd].addr=%.*p, init[%zd].size=%zd\n", i,
249	sizeof(uintptr_t) * 2, init.tasks[i].addr, i,	252	sizeof(uintptr_t) * 2, init.tasks[i].addr, i,
250	init.tasks[i].size);	253	init.tasks[i].size);
251	} else	254	} else
252	printf("No init binaries found\n");	255	printf("No init binaries found\n");
253		256
254	ipc_init();	257	ipc_init();
255		258
256	/*	259	/*
257	* Create kernel task.	260	* Create kernel task.
258	*/	261	*/
259	k = task_create(AS_KERNEL, "kernel");	262	k = task_create(AS_KERNEL, "kernel");
260	if (!k)	263	if (!k)
261	panic("can't create kernel task\n");	264	panic("can't create kernel task\n");
262		265
263	/*	266	/*
264	* Create the first thread.	267	* Create the first thread.
265	*/	268	*/
266	t = thread_create(kinit, NULL, k, 0, "kinit", true);	269	t = thread_create(kinit, NULL, k, 0, "kinit", true);
267	if (!t)	270	if (!t)
268	panic("can't create kinit thread\n");	271	panic("can't create kinit thread\n");
269	thread_ready(t);	272	thread_ready(t);
270		273
271	/*	274	/*
272	* This call to scheduler() will return to kinit,	275	* This call to scheduler() will return to kinit,
273	* starting the thread of kernel threads.	276	* starting the thread of kernel threads.
274	*/	277	*/
275	scheduler();	278	scheduler();
276	/* not reached */	279	/* not reached */
277	}	280	}
278		281
279		282
280	#ifdef CONFIG_SMP	283	#ifdef CONFIG_SMP
281	/** Main kernel routine for application CPUs.	284	/** Main kernel routine for application CPUs.
282	*	285	*
283	* Executed by application processors, temporary stack	286	* Executed by application processors, temporary stack
284	* is at ctx.sp which was set during BSP boot.	287	* is at ctx.sp which was set during BSP boot.
285	* This function passes control directly to	288	* This function passes control directly to
286	* main_ap_separated_stack().	289	* main_ap_separated_stack().
287	*	290	*
288	* Assuming interrupts_disable()'d.	291	* Assuming interrupts_disable()'d.
289	*	292	*
290	*/	293	*/
291	void main_ap(void)	294	void main_ap(void)
292	{	295	{
293	/*	296	/*
294	* Incrementing the active CPU counter will guarantee that the	297	* Incrementing the active CPU counter will guarantee that the
295	* *_init() functions can find out that they need to	298	* *_init() functions can find out that they need to
296	* do initialization for AP only.	299	* do initialization for AP only.
297	*/	300	*/
298	config.cpu_active++;	301	config.cpu_active++;
299		302
300	/*	303	/*
301	* The THE structure is well defined because ctx.sp is used as stack.	304	* The THE structure is well defined because ctx.sp is used as stack.
302	*/	305	*/
303	the_initialize(THE);	306	the_initialize(THE);
304		307
305	arch_pre_mm_init();	308	arch_pre_mm_init();
306	frame_init();	309	frame_init();
307	page_init();	310	page_init();
308	tlb_init();	311	tlb_init();
309	arch_post_mm_init();	312	arch_post_mm_init();
310		313
311	cpu_init();	314	cpu_init();
312	calibrate_delay_loop();	315	calibrate_delay_loop();
313	arch_post_cpu_init();	316	arch_post_cpu_init();
314		317
315	the_copy(THE, (the_t *) CPU->stack);	318	the_copy(THE, (the_t *) CPU->stack);
316		319
317	/*	320	/*
318	* If we woke kmp up before we left the kernel stack, we could	321	* If we woke kmp up before we left the kernel stack, we could
319	* collide with another CPU coming up. To prevent this, we	322	* collide with another CPU coming up. To prevent this, we
320	* switch to this cpu's private stack prior to waking kmp up.	323	* switch to this cpu's private stack prior to waking kmp up.
321	*/	324	*/
322	context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),	325	context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),
323	(uintptr_t) CPU->stack, CPU_STACK_SIZE);	326	(uintptr_t) CPU->stack, CPU_STACK_SIZE);
324	context_restore(&CPU->saved_context);	327	context_restore(&CPU->saved_context);
325	/* not reached */	328	/* not reached */
326	}	329	}
327		330
328		331
329	/** Main kernel routine for application CPUs using new stack.	332	/** Main kernel routine for application CPUs using new stack.
330	*	333	*
331	* Second part of main_ap().	334	* Second part of main_ap().
332	*	335	*
333	*/	336	*/
334	void main_ap_separated_stack(void)	337	void main_ap_separated_stack(void)
335	{	338	{
336	/*	339	/*
337	* Configure timeouts for this cpu.	340	* Configure timeouts for this cpu.
338	*/	341	*/
339	timeout_init();	342	timeout_init();
340		343
341	waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);	344	waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
342	scheduler();	345	scheduler();
343	/* not reached */	346	/* not reached */
344	}	347	}
345	#endif /* CONFIG_SMP */	348	#endif /* CONFIG_SMP */
346		349
347	/** @}	350	/** @}
348	*/	351	*/
349		352

Subversion Repositories HelenOS

(root)/trunk/kernel/generic/src/main/main.c – Rev 2745 → 2746