WebSVN – HelenOS-historic – Diff – /kernel/trunk/generic/src/console/cmd.c


/*
 * Copyright (C) 2005 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/**
 * This file is meant to contain all wrapper functions for
 * all kconsole commands. The point is in separating
 * kconsole specific wrappers from kconsole-unaware functions
 * from other subsystems.
 */
 
#include <console/cmd.h>
#include <console/kconsole.h>
#include <print.h>
#include <panic.h>
#include <typedefs.h>
#include <arch/types.h>
#include <list.h>
#include <arch.h>
#include <func.h>
#include <macros.h>
#include <debug.h>
#include <symtab.h>
 
#include <mm/tlb.h>
#include <arch/mm/tlb.h>
#include <mm/frame.h>
 
/** Data and methods for 'help' command. */
static int cmd_help(cmd_arg_t *argv);
static cmd_info_t help_info = {
    .name = "help",
    .description = "List of supported commands.",
    .func = cmd_help,
    .argc = 0
};
 
static cmd_info_t exit_info = {
    .name = "exit",
    .description ="Exit kconsole",
    .argc = 0
};
 
/** Data and methods for 'description' command. */
static int cmd_desc(cmd_arg_t *argv);
static void desc_help(void);
static char desc_buf[MAX_CMDLINE+1];
static cmd_arg_t desc_argv = {
    .type = ARG_TYPE_STRING,
    .buffer = desc_buf,
    .len = sizeof(desc_buf)
};
static cmd_info_t desc_info = {
    .name = "describe",
    .description = "Describe specified command.",
    .help = desc_help,
    .func = cmd_desc,
    .argc = 1,
    .argv = &desc_argv
};
 
/** Data and methods for 'symaddr' command. */
static int cmd_symaddr(cmd_arg_t *argv);
static char symaddr_buf[MAX_CMDLINE+1];
static cmd_arg_t symaddr_argv = {
    .type = ARG_TYPE_STRING,
    .buffer = symaddr_buf,
    .len = sizeof(symaddr_buf)
};
static cmd_info_t symaddr_info = {
    .name = "symaddr",
    .description = "Return symbol address.",
    .func = cmd_symaddr,
    .argc = 1,
    .argv = &symaddr_argv
};
 
static char set_buf[MAX_CMDLINE+1];
static int cmd_set4(cmd_arg_t *argv);
static cmd_arg_t set4_argv[] = {
    {
        .type = ARG_TYPE_STRING,
        .buffer = set_buf,
        .len = sizeof(set_buf)
    },
    {
        .type = ARG_TYPE_INT
    }
};
static cmd_info_t set4_info = {
    .name = "set4",
    .description = "set <dest_addr> <value> - 4byte version",
    .func = cmd_set4,
    .argc = 2,
    .argv = set4_argv
};
 
 
 
/** Data and methods for 'call0' command. */
static char call0_buf[MAX_CMDLINE+1];
static char carg1_buf[MAX_CMDLINE+1];
static char carg2_buf[MAX_CMDLINE+1];
static char carg3_buf[MAX_CMDLINE+1];
 
static int cmd_call0(cmd_arg_t *argv);
static cmd_arg_t call0_argv = {
    .type = ARG_TYPE_STRING,
    .buffer = call0_buf,
    .len = sizeof(call0_buf)
};
static cmd_info_t call0_info = {
    .name = "call0",
    .description = "call0 <function> -> call function().",
    .func = cmd_call0,
    .argc = 1,
    .argv = &call0_argv
};
 
/** Data and methods for 'call1' command. */
static int cmd_call1(cmd_arg_t *argv);
static cmd_arg_t call1_argv[] = {
    {
        .type = ARG_TYPE_STRING,
        .buffer = call0_buf,
        .len = sizeof(call0_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg1_buf,
        .len = sizeof(carg1_buf)
    }
};
static cmd_info_t call1_info = {
    .name = "call1",
    .description = "call1 <function> <arg1> -> call function(arg1).",
    .func = cmd_call1,
    .argc = 2,
    .argv = call1_argv
};
 
/** Data and methods for 'call2' command. */
static int cmd_call2(cmd_arg_t *argv);
static cmd_arg_t call2_argv[] = {
    {
        .type = ARG_TYPE_STRING,
        .buffer = call0_buf,
        .len = sizeof(call0_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg1_buf,
        .len = sizeof(carg1_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg2_buf,
        .len = sizeof(carg2_buf)
    }
};
static cmd_info_t call2_info = {
    .name = "call2",
    .description = "call2 <function> <arg1> <arg2> -> call function(arg1,arg2).",
    .func = cmd_call2,
    .argc = 3,
    .argv = call2_argv
};
 
/** Data and methods for 'call3' command. */
static int cmd_call3(cmd_arg_t *argv);
static cmd_arg_t call3_argv[] = {
    {
        .type = ARG_TYPE_STRING,
        .buffer = call0_buf,
        .len = sizeof(call0_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg1_buf,
        .len = sizeof(carg1_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg2_buf,
        .len = sizeof(carg2_buf)
    },
    {
        .type = ARG_TYPE_VAR,
        .buffer = carg3_buf,
        .len = sizeof(carg3_buf)
    }
 
};
static cmd_info_t call3_info = {
    .name = "call3",
    .description = "call3 <function> <arg1> <arg2> <arg3> -> call function(arg1,arg2,arg3).",
    .func = cmd_call3,
    .argc = 4,
    .argv = call3_argv
};
 
/** Data and methods for 'halt' command. */
static int cmd_halt(cmd_arg_t *argv);
static cmd_info_t halt_info = {
    .name = "halt",
    .description = "Halt the kernel.",
    .func = cmd_halt,
    .argc = 0
};
 
/** Data and methods for 'ptlb' command. */
static int cmd_ptlb(cmd_arg_t *argv);
cmd_info_t ptlb_info = {
    .name = "ptlb",
    .description = "Print TLB of current processor.",
    .help = NULL,
    .func = cmd_ptlb,
    .argc = 0,
    .argv = NULL
};
 
 
/** Data and methods for 'zones' command */
static int cmd_zones(cmd_arg_t *argv);
static cmd_info_t zones_info = {
    .name = "zones",
    .description = "List of memory zones.",
    .func = cmd_zones,
    .argc = 0
};
 
/** Data and methods for 'zone' command */
static int cmd_zone(cmd_arg_t *argv);
static char zone_buf[MAX_CMDLINE+1];
static cmd_arg_t zone_argv = {
    .type = ARG_TYPE_INT,
    .buffer = zone_buf,
    .len = sizeof(zone_buf)
};
 
 
static cmd_info_t zone_info = {
    .name = "zone",
    .description = "Show memory zone structure.",
    .func = cmd_zone,
    .argc = 1,
    .argv = &zone_argv
};
 
 
 
/** Initialize command info structure.
 *
 * @param cmd Command info structure.
 *
 */
void cmd_initialize(cmd_info_t *cmd)
{
    spinlock_initialize(&cmd->lock, "cmd");
    link_initialize(&cmd->link);
}
 
/** Initialize and register commands. */
void cmd_init(void)
{
    cmd_initialize(&help_info);
    if (!cmd_register(&help_info))
        panic("could not register command %s\n", help_info.name);
 
    cmd_initialize(&desc_info);
    if (!cmd_register(&desc_info))
        panic("could not register command %s\n", desc_info.name);
 
    cmd_initialize(&exit_info);
    if (!cmd_register(&exit_info))
        panic("could not register command %s\n", exit_info.name);
   
    cmd_initialize(&symaddr_info);
    if (!cmd_register(&symaddr_info))
        panic("could not register command %s\n", symaddr_info.name);
 
    cmd_initialize(&call0_info);
    if (!cmd_register(&call0_info))
        panic("could not register command %s\n", call0_info.name);
 
    cmd_initialize(&call1_info);
    if (!cmd_register(&call1_info))
        panic("could not register command %s\n", call1_info.name);
 
    cmd_initialize(&call2_info);
    if (!cmd_register(&call2_info))
        panic("could not register command %s\n", call2_info.name);
 
    cmd_initialize(&call3_info);
    if (!cmd_register(&call3_info))
        panic("could not register command %s\n", call3_info.name);
 
    cmd_initialize(&set4_info);
    if (!cmd_register(&set4_info))
        panic("could not register command %s\n", set4_info.name);
   
    cmd_initialize(&halt_info);
    if (!cmd_register(&halt_info))
        panic("could not register command %s\n", halt_info.name);
 
    cmd_initialize(&ptlb_info);
    if (!cmd_register(&ptlb_info))
        panic("could not register command %s\n", ptlb_info.name);
 
    cmd_initialize(&zones_info);
    if (!cmd_register(&zones_info))
        panic("could not register command %s\n", zones_info.name);
 
    cmd_initialize(&zone_info);
    if (!cmd_register(&zone_info))
        panic("could not register command %s\n", zone_info.name);
 
 
}
 
 
/** List supported commands.
 *
 * @param argv Argument vector.
 *
 * @return 0 on failure, 1 on success.
 */
int cmd_help(cmd_arg_t *argv)
{
    link_t *cur;
 
    spinlock_lock(&cmd_lock);
   
    for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {
        cmd_info_t *hlp;
       
        hlp = list_get_instance(cur, cmd_info_t, link);
        spinlock_lock(&hlp->lock);
       
        printf("%s - %s\n", hlp->name, hlp->description);
 
        spinlock_unlock(&hlp->lock);
    }
   
    spinlock_unlock(&cmd_lock);
 
    return 1;
}
 
/** Describe specified command.
 *
 * @param argv Argument vector.
 *
 * @return 0 on failure, 1 on success.
 */
int cmd_desc(cmd_arg_t *argv)
{
    link_t *cur;
 
    spinlock_lock(&cmd_lock);
   
    for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {
        cmd_info_t *hlp;
       
        hlp = list_get_instance(cur, cmd_info_t, link);
        spinlock_lock(&hlp->lock);
 
        if (strncmp(hlp->name, (const char *) argv->buffer, strlen(hlp->name)) == 0) {
            printf("%s - %s\n", hlp->name, hlp->description);
            if (hlp->help)
                hlp->help();
            spinlock_unlock(&hlp->lock);
            break;
        }
 
        spinlock_unlock(&hlp->lock);
    }
   
    spinlock_unlock(&cmd_lock);
 
    return 1;
}
 
/** Search symbol table */
int cmd_symaddr(cmd_arg_t *argv)
{
    symtab_print_search(argv->buffer);
   
    return 1;
}
 
/** Call function with zero parameters */
int cmd_call0(cmd_arg_t *argv)
{
    __address symaddr;
    char *symbol;
    __native (*f)(void);
 
    symaddr = get_symbol_addr(argv->buffer);
    if (!symaddr)
        printf("Symbol %s not found.\n", argv->buffer);
    else if (symaddr == (__address) -1) {
        symtab_print_search(argv->buffer);
        printf("Duplicate symbol, be more specific.\n");
    } else {
        symbol = get_symtab_entry(symaddr);
        printf("Calling f(): 0x%p: %s\n", symaddr, symbol);
        f =  (__native (*)(void)) symaddr;
        printf("Result: 0x%p\n", f());
    }
   
    return 1;
}
 
/** Call function with one parameter */
int cmd_call1(cmd_arg_t *argv)
{
    __address symaddr;
    char *symbol;
    __native (*f)(__native);
    __native arg1 = argv[1].intval;
 
    symaddr = get_symbol_addr(argv->buffer);
    if (!symaddr)
        printf("Symbol %s not found.\n", argv->buffer);
    else if (symaddr == (__address) -1) {
        symtab_print_search(argv->buffer);
        printf("Duplicate symbol, be more specific.\n");
    } else {
        symbol = get_symtab_entry(symaddr);
        printf("Calling f(0x%x): 0x%p: %s\n", arg1, symaddr, symbol);
        f =  (__native (*)(__native)) symaddr;
        printf("Result: 0x%p\n", f(arg1));
    }
   
    return 1;
}
 
/** Call function with two parameters */
int cmd_call2(cmd_arg_t *argv)
{
    __address symaddr;
    char *symbol;
    __native (*f)(__native,__native);
    __native arg1 = argv[1].intval;
    __native arg2 = argv[2].intval;
 
    symaddr = get_symbol_addr(argv->buffer);
    if (!symaddr)
        printf("Symbol %s not found.\n", argv->buffer);
    else if (symaddr == (__address) -1) {
        symtab_print_search(argv->buffer);
        printf("Duplicate symbol, be more specific.\n");
    } else {
        symbol = get_symtab_entry(symaddr);
        printf("Calling f(0x%x,0x%x): 0x%p: %s\n",
               arg1, arg2, symaddr, symbol);
        f =  (__native (*)(__native,__native)) symaddr;
        printf("Result: 0x%p\n", f(arg1, arg2));
    }
   
    return 1;
}
 
/** Call function with three parameters */
int cmd_call3(cmd_arg_t *argv)
{
    __address symaddr;
    char *symbol;
    __native (*f)(__native,__native,__native);
    __native arg1 = argv[1].intval;
    __native arg2 = argv[2].intval;
    __native arg3 = argv[3].intval;
 
    symaddr = get_symbol_addr(argv->buffer);
    if (!symaddr)
        printf("Symbol %s not found.\n", argv->buffer);
    else if (symaddr == (__address) -1) {
        symtab_print_search(argv->buffer);
        printf("Duplicate symbol, be more specific.\n");
    } else {
        symbol = get_symtab_entry(symaddr);
        printf("Calling f(0x%x,0x%x, 0x%x): 0x%p: %s\n",
               arg1, arg2, arg3, symaddr, symbol);
        f =  (__native (*)(__native,__native,__native)) symaddr;
        printf("Result: 0x%p\n", f(arg1, arg2, arg3));
    }
   
    return 1;
}
 
 
/** Print detailed description of 'describe' command. */
void desc_help(void)
{
    printf("Syntax: describe command_name\n");
}
 
/** Halt the kernel.
 *
 * @param argv Argument vector (ignored).
 *
 * @return 0 on failure, 1 on success (never returns).
 */
int cmd_halt(cmd_arg_t *argv)
{
    halt();
    return 1;
}
 
/** Command for printing TLB contents.
 *
 * @param argv Not used.
 *
 * @return Always returns 1.
 */
int cmd_ptlb(cmd_arg_t *argv)
{
    tlb_print();
    return 1;
}
 
/** Write 4 byte value to address */
int cmd_set4(cmd_arg_t *argv)
{
    __u32 *addr ;
    __u32 arg1 = argv[1].intval;
    bool pointer = false;
 
    if (((char *)argv->buffer)[0] == '*') {
        addr = (__u32 *) get_symbol_addr(argv->buffer+1);
        pointer = true;
    } else if (((char *)argv->buffer)[0] >= '0' &&
           ((char *)argv->buffer)[0] <= '9')
        addr = (__u32 *)atoi((char *)argv->buffer);
    else
        addr = (__u32 *)get_symbol_addr(argv->buffer);
 
    if (!addr)
        printf("Symbol %s not found.\n", argv->buffer);
    else if (addr == (__u32 *) -1) {
        symtab_print_search(argv->buffer);
        printf("Duplicate symbol, be more specific.\n");
    } else {
        if (pointer)
            addr = (__u32 *)(*(__native *)addr);
        printf("Writing 0x%x -> 0x%p\n", arg1, addr);
        *addr = arg1;
       
    }
   
    return 1;
}
 
 
int cmd_zones(cmd_arg_t * argv) {
    printf("Zones listing not implemented\n");
    return 1;
}
int cmd_zone(cmd_arg_t * argv) {
    printf("Zone details not implemented\n");
    return 1;
}
 
 

Rev 625	Rev 668
1	/*	1	/*
2	* Copyright (C) 2005 Jakub Jermar	2	* Copyright (C) 2005 Jakub Jermar
3	* All rights reserved.	3	* All rights reserved.
4	*	4	*
5	* Redistribution and use in source and binary forms, with or without	5	* Redistribution and use in source and binary forms, with or without
6	* modification, are permitted provided that the following conditions	6	* modification, are permitted provided that the following conditions
7	* are met:	7	* are met:
8	*	8	*
9	* - Redistributions of source code must retain the above copyright	9	* - Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.	10	* notice, this list of conditions and the following disclaimer.
11	* - Redistributions in binary form must reproduce the above copyright	11	* - Redistributions in binary form must reproduce the above copyright
12	* notice, this list of conditions and the following disclaimer in the	12	* notice, this list of conditions and the following disclaimer in the
13	* documentation and/or other materials provided with the distribution.	13	* documentation and/or other materials provided with the distribution.
14	* - The name of the author may not be used to endorse or promote products	14	* - The name of the author may not be used to endorse or promote products
15	* derived from this software without specific prior written permission.	15	* derived from this software without specific prior written permission.
16	*	16	*
17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	*/	27	*/
28		28
29	/**	29	/**
30	* This file is meant to contain all wrapper functions for	30	* This file is meant to contain all wrapper functions for
31	* all kconsole commands. The point is in separating	31	* all kconsole commands. The point is in separating
32	* kconsole specific wrappers from kconsole-unaware functions	32	* kconsole specific wrappers from kconsole-unaware functions
33	* from other subsystems.	33	* from other subsystems.
34	*/	34	*/
35		35
36	#include <console/cmd.h>	36	#include <console/cmd.h>
37	#include <console/kconsole.h>	37	#include <console/kconsole.h>
38	#include <print.h>	38	#include <print.h>
39	#include <panic.h>	39	#include <panic.h>
40	#include <typedefs.h>	40	#include <typedefs.h>
41	#include <arch/types.h>	41	#include <arch/types.h>
42	#include <list.h>	42	#include <list.h>
43	#include <arch.h>	43	#include <arch.h>
44	#include <func.h>	44	#include <func.h>
45	#include <macros.h>	45	#include <macros.h>
46	#include <debug.h>	46	#include <debug.h>
47	#include <symtab.h>	47	#include <symtab.h>
48		48
49	#include <mm/tlb.h>	49	#include <mm/tlb.h>
50	#include <arch/mm/tlb.h>	50	#include <arch/mm/tlb.h>
-		51	#include <mm/frame.h>
51		52
52	/** Data and methods for 'help' command. */	53	/** Data and methods for 'help' command. */
53	static int cmd_help(cmd_arg_t *argv);	54	static int cmd_help(cmd_arg_t *argv);
54	static cmd_info_t help_info = {	55	static cmd_info_t help_info = {
55	.name = "help",	56	.name = "help",
56	.description = "List of supported commands.",	57	.description = "List of supported commands.",
57	.func = cmd_help,	58	.func = cmd_help,
58	.argc = 0	59	.argc = 0
59	};	60	};
60		61
61	static cmd_info_t exit_info = {	62	static cmd_info_t exit_info = {
62	.name = "exit",	63	.name = "exit",
63	.description ="Exit kconsole",	64	.description ="Exit kconsole",
64	.argc = 0	65	.argc = 0
65	};	66	};
66		67
67	/** Data and methods for 'description' command. */	68	/** Data and methods for 'description' command. */
68	static int cmd_desc(cmd_arg_t *argv);	69	static int cmd_desc(cmd_arg_t *argv);
69	static void desc_help(void);	70	static void desc_help(void);
70	static char desc_buf[MAX_CMDLINE+1];	71	static char desc_buf[MAX_CMDLINE+1];
71	static cmd_arg_t desc_argv = {	72	static cmd_arg_t desc_argv = {
72	.type = ARG_TYPE_STRING,	73	.type = ARG_TYPE_STRING,
73	.buffer = desc_buf,	74	.buffer = desc_buf,
74	.len = sizeof(desc_buf)	75	.len = sizeof(desc_buf)
75	};	76	};
76	static cmd_info_t desc_info = {	77	static cmd_info_t desc_info = {
77	.name = "describe",	78	.name = "describe",
78	.description = "Describe specified command.",	79	.description = "Describe specified command.",
79	.help = desc_help,	80	.help = desc_help,
80	.func = cmd_desc,	81	.func = cmd_desc,
81	.argc = 1,	82	.argc = 1,
82	.argv = &desc_argv	83	.argv = &desc_argv
83	};	84	};
84		85
85	/** Data and methods for 'symaddr' command. */	86	/** Data and methods for 'symaddr' command. */
86	static int cmd_symaddr(cmd_arg_t *argv);	87	static int cmd_symaddr(cmd_arg_t *argv);
87	static char symaddr_buf[MAX_CMDLINE+1];	88	static char symaddr_buf[MAX_CMDLINE+1];
88	static cmd_arg_t symaddr_argv = {	89	static cmd_arg_t symaddr_argv = {
89	.type = ARG_TYPE_STRING,	90	.type = ARG_TYPE_STRING,
90	.buffer = symaddr_buf,	91	.buffer = symaddr_buf,
91	.len = sizeof(symaddr_buf)	92	.len = sizeof(symaddr_buf)
92	};	93	};
93	static cmd_info_t symaddr_info = {	94	static cmd_info_t symaddr_info = {
94	.name = "symaddr",	95	.name = "symaddr",
95	.description = "Return symbol address.",	96	.description = "Return symbol address.",
96	.func = cmd_symaddr,	97	.func = cmd_symaddr,
97	.argc = 1,	98	.argc = 1,
98	.argv = &symaddr_argv	99	.argv = &symaddr_argv
99	};	100	};
100		101
101	static char set_buf[MAX_CMDLINE+1];	102	static char set_buf[MAX_CMDLINE+1];
102	static int cmd_set4(cmd_arg_t *argv);	103	static int cmd_set4(cmd_arg_t *argv);
103	static cmd_arg_t set4_argv[] = {	104	static cmd_arg_t set4_argv[] = {
104	{	105	{
105	.type = ARG_TYPE_STRING,	106	.type = ARG_TYPE_STRING,
106	.buffer = set_buf,	107	.buffer = set_buf,
107	.len = sizeof(set_buf)	108	.len = sizeof(set_buf)
108	},	109	},
109	{	110	{
110	.type = ARG_TYPE_INT	111	.type = ARG_TYPE_INT
111	}	112	}
112	};	113	};
113	static cmd_info_t set4_info = {	114	static cmd_info_t set4_info = {
114	.name = "set4",	115	.name = "set4",
115	.description = "set <dest_addr> <value> - 4byte version",	116	.description = "set <dest_addr> <value> - 4byte version",
116	.func = cmd_set4,	117	.func = cmd_set4,
117	.argc = 2,	118	.argc = 2,
118	.argv = set4_argv	119	.argv = set4_argv
119	};	120	};
120		121
121		122
-		123
122	/** Data and methods for 'call0' command. */	124	/** Data and methods for 'call0' command. */
123	static char call0_buf[MAX_CMDLINE+1];	125	static char call0_buf[MAX_CMDLINE+1];
124	static char carg1_buf[MAX_CMDLINE+1];	126	static char carg1_buf[MAX_CMDLINE+1];
125	static char carg2_buf[MAX_CMDLINE+1];	127	static char carg2_buf[MAX_CMDLINE+1];
126	static char carg3_buf[MAX_CMDLINE+1];	128	static char carg3_buf[MAX_CMDLINE+1];
127		129
128	static int cmd_call0(cmd_arg_t *argv);	130	static int cmd_call0(cmd_arg_t *argv);
129	static cmd_arg_t call0_argv = {	131	static cmd_arg_t call0_argv = {
130	.type = ARG_TYPE_STRING,	132	.type = ARG_TYPE_STRING,
131	.buffer = call0_buf,	133	.buffer = call0_buf,
132	.len = sizeof(call0_buf)	134	.len = sizeof(call0_buf)
133	};	135	};
134	static cmd_info_t call0_info = {	136	static cmd_info_t call0_info = {
135	.name = "call0",	137	.name = "call0",
136	.description = "call0 <function> -> call function().",	138	.description = "call0 <function> -> call function().",
137	.func = cmd_call0,	139	.func = cmd_call0,
138	.argc = 1,	140	.argc = 1,
139	.argv = &call0_argv	141	.argv = &call0_argv
140	};	142	};
141		143
142	/** Data and methods for 'call1' command. */	144	/** Data and methods for 'call1' command. */
143	static int cmd_call1(cmd_arg_t *argv);	145	static int cmd_call1(cmd_arg_t *argv);
144	static cmd_arg_t call1_argv[] = {	146	static cmd_arg_t call1_argv[] = {
145	{	147	{
146	.type = ARG_TYPE_STRING,	148	.type = ARG_TYPE_STRING,
147	.buffer = call0_buf,	149	.buffer = call0_buf,
148	.len = sizeof(call0_buf)	150	.len = sizeof(call0_buf)
149	},	151	},
150	{	152	{
151	.type = ARG_TYPE_VAR,	153	.type = ARG_TYPE_VAR,
152	.buffer = carg1_buf,	154	.buffer = carg1_buf,
153	.len = sizeof(carg1_buf)	155	.len = sizeof(carg1_buf)
154	}	156	}
155	};	157	};
156	static cmd_info_t call1_info = {	158	static cmd_info_t call1_info = {
157	.name = "call1",	159	.name = "call1",
158	.description = "call1 <function> <arg1> -> call function(arg1).",	160	.description = "call1 <function> <arg1> -> call function(arg1).",
159	.func = cmd_call1,	161	.func = cmd_call1,
160	.argc = 2,	162	.argc = 2,
161	.argv = call1_argv	163	.argv = call1_argv
162	};	164	};
163		165
164	/** Data and methods for 'call2' command. */	166	/** Data and methods for 'call2' command. */
165	static int cmd_call2(cmd_arg_t *argv);	167	static int cmd_call2(cmd_arg_t *argv);
166	static cmd_arg_t call2_argv[] = {	168	static cmd_arg_t call2_argv[] = {
167	{	169	{
168	.type = ARG_TYPE_STRING,	170	.type = ARG_TYPE_STRING,
169	.buffer = call0_buf,	171	.buffer = call0_buf,
170	.len = sizeof(call0_buf)	172	.len = sizeof(call0_buf)
171	},	173	},
172	{	174	{
173	.type = ARG_TYPE_VAR,	175	.type = ARG_TYPE_VAR,
174	.buffer = carg1_buf,	176	.buffer = carg1_buf,
175	.len = sizeof(carg1_buf)	177	.len = sizeof(carg1_buf)
176	},	178	},
177	{	179	{
178	.type = ARG_TYPE_VAR,	180	.type = ARG_TYPE_VAR,
179	.buffer = carg2_buf,	181	.buffer = carg2_buf,
180	.len = sizeof(carg2_buf)	182	.len = sizeof(carg2_buf)
181	}	183	}
182	};	184	};
183	static cmd_info_t call2_info = {	185	static cmd_info_t call2_info = {
184	.name = "call2",	186	.name = "call2",
185	.description = "call2 <function> <arg1> <arg2> -> call function(arg1,arg2).",	187	.description = "call2 <function> <arg1> <arg2> -> call function(arg1,arg2).",
186	.func = cmd_call2,	188	.func = cmd_call2,
187	.argc = 3,	189	.argc = 3,
188	.argv = call2_argv	190	.argv = call2_argv
189	};	191	};
190		192
191	/** Data and methods for 'call3' command. */	193	/** Data and methods for 'call3' command. */
192	static int cmd_call3(cmd_arg_t *argv);	194	static int cmd_call3(cmd_arg_t *argv);
193	static cmd_arg_t call3_argv[] = {	195	static cmd_arg_t call3_argv[] = {
194	{	196	{
195	.type = ARG_TYPE_STRING,	197	.type = ARG_TYPE_STRING,
196	.buffer = call0_buf,	198	.buffer = call0_buf,
197	.len = sizeof(call0_buf)	199	.len = sizeof(call0_buf)
198	},	200	},
199	{	201	{
200	.type = ARG_TYPE_VAR,	202	.type = ARG_TYPE_VAR,
201	.buffer = carg1_buf,	203	.buffer = carg1_buf,
202	.len = sizeof(carg1_buf)	204	.len = sizeof(carg1_buf)
203	},	205	},
204	{	206	{
205	.type = ARG_TYPE_VAR,	207	.type = ARG_TYPE_VAR,
206	.buffer = carg2_buf,	208	.buffer = carg2_buf,
207	.len = sizeof(carg2_buf)	209	.len = sizeof(carg2_buf)
208	},	210	},
209	{	211	{
210	.type = ARG_TYPE_VAR,	212	.type = ARG_TYPE_VAR,
211	.buffer = carg3_buf,	213	.buffer = carg3_buf,
212	.len = sizeof(carg3_buf)	214	.len = sizeof(carg3_buf)
213	}	215	}
214		216
215	};	217	};
216	static cmd_info_t call3_info = {	218	static cmd_info_t call3_info = {
217	.name = "call3",	219	.name = "call3",
218	.description = "call3 <function> <arg1> <arg2> <arg3> -> call function(arg1,arg2,arg3).",	220	.description = "call3 <function> <arg1> <arg2> <arg3> -> call function(arg1,arg2,arg3).",
219	.func = cmd_call3,	221	.func = cmd_call3,
220	.argc = 4,	222	.argc = 4,
221	.argv = call3_argv	223	.argv = call3_argv
222	};	224	};
223		225
224	/** Data and methods for 'halt' command. */	226	/** Data and methods for 'halt' command. */
225	static int cmd_halt(cmd_arg_t *argv);	227	static int cmd_halt(cmd_arg_t *argv);
226	static cmd_info_t halt_info = {	228	static cmd_info_t halt_info = {
227	.name = "halt",	229	.name = "halt",
228	.description = "Halt the kernel.",	230	.description = "Halt the kernel.",
229	.func = cmd_halt,	231	.func = cmd_halt,
230	.argc = 0	232	.argc = 0
231	};	233	};
232		234
233	/** Data and methods for 'ptlb' command. */	235	/** Data and methods for 'ptlb' command. */
234	static int cmd_ptlb(cmd_arg_t *argv);	236	static int cmd_ptlb(cmd_arg_t *argv);
235	cmd_info_t ptlb_info = {	237	cmd_info_t ptlb_info = {
236	.name = "ptlb",	238	.name = "ptlb",
237	.description = "Print TLB of current processor.",	239	.description = "Print TLB of current processor.",
238	.help = NULL,	240	.help = NULL,
239	.func = cmd_ptlb,	241	.func = cmd_ptlb,
240	.argc = 0,	242	.argc = 0,
241	.argv = NULL	243	.argv = NULL
242	};	244	};
243		245
-		246
-		247	/** Data and methods for 'zones' command */
-		248	static int cmd_zones(cmd_arg_t *argv);
-		249	static cmd_info_t zones_info = {
-		250	.name = "zones",
-		251	.description = "List of memory zones.",
-		252	.func = cmd_zones,
-		253	.argc = 0
-		254	};
-		255
-		256	/** Data and methods for 'zone' command */
-		257	static int cmd_zone(cmd_arg_t *argv);
-		258	static char zone_buf[MAX_CMDLINE+1];
-		259	static cmd_arg_t zone_argv = {
-		260	.type = ARG_TYPE_INT,
-		261	.buffer = zone_buf,
-		262	.len = sizeof(zone_buf)
-		263	};
-		264
-		265
-		266	static cmd_info_t zone_info = {
-		267	.name = "zone",
-		268	.description = "Show memory zone structure.",
-		269	.func = cmd_zone,
-		270	.argc = 1,
-		271	.argv = &zone_argv
-		272	};
-		273
-		274
-		275
244	/** Initialize command info structure.	276	/** Initialize command info structure.
245	*	277	*
246	* @param cmd Command info structure.	278	* @param cmd Command info structure.
247	*	279	*
248	*/	280	*/
249	void cmd_initialize(cmd_info_t *cmd)	281	void cmd_initialize(cmd_info_t *cmd)
250	{	282	{
251	spinlock_initialize(&cmd->lock, "cmd");	283	spinlock_initialize(&cmd->lock, "cmd");
252	link_initialize(&cmd->link);	284	link_initialize(&cmd->link);
253	}	285	}
254		286
255	/** Initialize and register commands. */	287	/** Initialize and register commands. */
256	void cmd_init(void)	288	void cmd_init(void)
257	{	289	{
258	cmd_initialize(&help_info);	290	cmd_initialize(&help_info);
259	if (!cmd_register(&help_info))	291	if (!cmd_register(&help_info))
260	panic("could not register command %s\n", help_info.name);	292	panic("could not register command %s\n", help_info.name);
261		293
262	cmd_initialize(&desc_info);	294	cmd_initialize(&desc_info);
263	if (!cmd_register(&desc_info))	295	if (!cmd_register(&desc_info))
264	panic("could not register command %s\n", desc_info.name);	296	panic("could not register command %s\n", desc_info.name);
265		297
266	cmd_initialize(&exit_info);	298	cmd_initialize(&exit_info);
267	if (!cmd_register(&exit_info))	299	if (!cmd_register(&exit_info))
268	panic("could not register command %s\n", exit_info.name);	300	panic("could not register command %s\n", exit_info.name);
269		301
270	cmd_initialize(&symaddr_info);	302	cmd_initialize(&symaddr_info);
271	if (!cmd_register(&symaddr_info))	303	if (!cmd_register(&symaddr_info))
272	panic("could not register command %s\n", symaddr_info.name);	304	panic("could not register command %s\n", symaddr_info.name);
273		305
274	cmd_initialize(&call0_info);	306	cmd_initialize(&call0_info);
275	if (!cmd_register(&call0_info))	307	if (!cmd_register(&call0_info))
276	panic("could not register command %s\n", call0_info.name);	308	panic("could not register command %s\n", call0_info.name);
277		309
278	cmd_initialize(&call1_info);	310	cmd_initialize(&call1_info);
279	if (!cmd_register(&call1_info))	311	if (!cmd_register(&call1_info))
280	panic("could not register command %s\n", call1_info.name);	312	panic("could not register command %s\n", call1_info.name);
281		313
282	cmd_initialize(&call2_info);	314	cmd_initialize(&call2_info);
283	if (!cmd_register(&call2_info))	315	if (!cmd_register(&call2_info))
284	panic("could not register command %s\n", call2_info.name);	316	panic("could not register command %s\n", call2_info.name);
285		317
286	cmd_initialize(&call3_info);	318	cmd_initialize(&call3_info);
287	if (!cmd_register(&call3_info))	319	if (!cmd_register(&call3_info))
288	panic("could not register command %s\n", call3_info.name);	320	panic("could not register command %s\n", call3_info.name);
289		321
290	cmd_initialize(&set4_info);	322	cmd_initialize(&set4_info);
291	if (!cmd_register(&set4_info))	323	if (!cmd_register(&set4_info))
292	panic("could not register command %s\n", set4_info.name);	324	panic("could not register command %s\n", set4_info.name);
293		325
294	cmd_initialize(&halt_info);	326	cmd_initialize(&halt_info);
295	if (!cmd_register(&halt_info))	327	if (!cmd_register(&halt_info))
296	panic("could not register command %s\n", halt_info.name);	328	panic("could not register command %s\n", halt_info.name);
297		329
298	cmd_initialize(&ptlb_info);	330	cmd_initialize(&ptlb_info);
299	if (!cmd_register(&ptlb_info))	331	if (!cmd_register(&ptlb_info))
300	panic("could not register command %s\n", ptlb_info.name);	332	panic("could not register command %s\n", ptlb_info.name);
-		333
-		334	cmd_initialize(&zones_info);
-		335	if (!cmd_register(&zones_info))
-		336	panic("could not register command %s\n", zones_info.name);
-		337
-		338	cmd_initialize(&zone_info);
-		339	if (!cmd_register(&zone_info))
-		340	panic("could not register command %s\n", zone_info.name);
-		341
-		342
301	}	343	}
302		344
303		345
304	/** List supported commands.	346	/** List supported commands.
305	*	347	*
306	* @param argv Argument vector.	348	* @param argv Argument vector.
307	*	349	*
308	* @return 0 on failure, 1 on success.	350	* @return 0 on failure, 1 on success.
309	*/	351	*/
310	int cmd_help(cmd_arg_t *argv)	352	int cmd_help(cmd_arg_t *argv)
311	{	353	{
312	link_t *cur;	354	link_t *cur;
313		355
314	spinlock_lock(&cmd_lock);	356	spinlock_lock(&cmd_lock);
315		357
316	for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {	358	for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {
317	cmd_info_t *hlp;	359	cmd_info_t *hlp;
318		360
319	hlp = list_get_instance(cur, cmd_info_t, link);	361	hlp = list_get_instance(cur, cmd_info_t, link);
320	spinlock_lock(&hlp->lock);	362	spinlock_lock(&hlp->lock);
321		363
322	printf("%s - %s\n", hlp->name, hlp->description);	364	printf("%s - %s\n", hlp->name, hlp->description);
323		365
324	spinlock_unlock(&hlp->lock);	366	spinlock_unlock(&hlp->lock);
325	}	367	}
326		368
327	spinlock_unlock(&cmd_lock);	369	spinlock_unlock(&cmd_lock);
328		370
329	return 1;	371	return 1;
330	}	372	}
331		373
332	/** Describe specified command.	374	/** Describe specified command.
333	*	375	*
334	* @param argv Argument vector.	376	* @param argv Argument vector.
335	*	377	*
336	* @return 0 on failure, 1 on success.	378	* @return 0 on failure, 1 on success.
337	*/	379	*/
338	int cmd_desc(cmd_arg_t *argv)	380	int cmd_desc(cmd_arg_t *argv)
339	{	381	{
340	link_t *cur;	382	link_t *cur;
341		383
342	spinlock_lock(&cmd_lock);	384	spinlock_lock(&cmd_lock);
343		385
344	for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {	386	for (cur = cmd_head.next; cur != &cmd_head; cur = cur->next) {
345	cmd_info_t *hlp;	387	cmd_info_t *hlp;
346		388
347	hlp = list_get_instance(cur, cmd_info_t, link);	389	hlp = list_get_instance(cur, cmd_info_t, link);
348	spinlock_lock(&hlp->lock);	390	spinlock_lock(&hlp->lock);
349		391
350	if (strncmp(hlp->name, (const char *) argv->buffer, strlen(hlp->name)) == 0) {	392	if (strncmp(hlp->name, (const char *) argv->buffer, strlen(hlp->name)) == 0) {
351	printf("%s - %s\n", hlp->name, hlp->description);	393	printf("%s - %s\n", hlp->name, hlp->description);
352	if (hlp->help)	394	if (hlp->help)
353	hlp->help();	395	hlp->help();
354	spinlock_unlock(&hlp->lock);	396	spinlock_unlock(&hlp->lock);
355	break;	397	break;
356	}	398	}
357		399
358	spinlock_unlock(&hlp->lock);	400	spinlock_unlock(&hlp->lock);
359	}	401	}
360		402
361	spinlock_unlock(&cmd_lock);	403	spinlock_unlock(&cmd_lock);
362		404
363	return 1;	405	return 1;
364	}	406	}
365		407
366	/** Search symbol table */	408	/** Search symbol table */
367	int cmd_symaddr(cmd_arg_t *argv)	409	int cmd_symaddr(cmd_arg_t *argv)
368	{	410	{
369	symtab_print_search(argv->buffer);	411	symtab_print_search(argv->buffer);
370		412
371	return 1;	413	return 1;
372	}	414	}
373		415
374	/** Call function with zero parameters */	416	/** Call function with zero parameters */
375	int cmd_call0(cmd_arg_t *argv)	417	int cmd_call0(cmd_arg_t *argv)
376	{	418	{
377	__address symaddr;	419	__address symaddr;
378	char *symbol;	420	char *symbol;
379	__native (*f)(void);	421	__native (*f)(void);
380		422
381	symaddr = get_symbol_addr(argv->buffer);	423	symaddr = get_symbol_addr(argv->buffer);
382	if (!symaddr)	424	if (!symaddr)
383	printf("Symbol %s not found.\n", argv->buffer);	425	printf("Symbol %s not found.\n", argv->buffer);
384	else if (symaddr == (__address) -1) {	426	else if (symaddr == (__address) -1) {
385	symtab_print_search(argv->buffer);	427	symtab_print_search(argv->buffer);
386	printf("Duplicate symbol, be more specific.\n");	428	printf("Duplicate symbol, be more specific.\n");
387	} else {	429	} else {
388	symbol = get_symtab_entry(symaddr);	430	symbol = get_symtab_entry(symaddr);
389	printf("Calling f(): 0x%p: %s\n", symaddr, symbol);	431	printf("Calling f(): 0x%p: %s\n", symaddr, symbol);
390	f = (__native (*)(void)) symaddr;	432	f = (__native (*)(void)) symaddr;
391	printf("Result: 0x%p\n", f());	433	printf("Result: 0x%p\n", f());
392	}	434	}
393		435
394	return 1;	436	return 1;
395	}	437	}
396		438
397	/** Call function with one parameter */	439	/** Call function with one parameter */
398	int cmd_call1(cmd_arg_t *argv)	440	int cmd_call1(cmd_arg_t *argv)
399	{	441	{
400	__address symaddr;	442	__address symaddr;
401	char *symbol;	443	char *symbol;
402	__native (*f)(__native);	444	__native (*f)(__native);
403	__native arg1 = argv[1].intval;	445	__native arg1 = argv[1].intval;
404		446
405	symaddr = get_symbol_addr(argv->buffer);	447	symaddr = get_symbol_addr(argv->buffer);
406	if (!symaddr)	448	if (!symaddr)
407	printf("Symbol %s not found.\n", argv->buffer);	449	printf("Symbol %s not found.\n", argv->buffer);
408	else if (symaddr == (__address) -1) {	450	else if (symaddr == (__address) -1) {
409	symtab_print_search(argv->buffer);	451	symtab_print_search(argv->buffer);
410	printf("Duplicate symbol, be more specific.\n");	452	printf("Duplicate symbol, be more specific.\n");
411	} else {	453	} else {
412	symbol = get_symtab_entry(symaddr);	454	symbol = get_symtab_entry(symaddr);
413	printf("Calling f(0x%x): 0x%p: %s\n", arg1, symaddr, symbol);	455	printf("Calling f(0x%x): 0x%p: %s\n", arg1, symaddr, symbol);
414	f = (__native (*)(__native)) symaddr;	456	f = (__native (*)(__native)) symaddr;
415	printf("Result: 0x%p\n", f(arg1));	457	printf("Result: 0x%p\n", f(arg1));
416	}	458	}
417		459
418	return 1;	460	return 1;
419	}	461	}
420		462
421	/** Call function with two parameters */	463	/** Call function with two parameters */
422	int cmd_call2(cmd_arg_t *argv)	464	int cmd_call2(cmd_arg_t *argv)
423	{	465	{
424	__address symaddr;	466	__address symaddr;
425	char *symbol;	467	char *symbol;
426	__native (*f)(__native,__native);	468	__native (*f)(__native,__native);
427	__native arg1 = argv[1].intval;	469	__native arg1 = argv[1].intval;
428	__native arg2 = argv[2].intval;	470	__native arg2 = argv[2].intval;
429		471
430	symaddr = get_symbol_addr(argv->buffer);	472	symaddr = get_symbol_addr(argv->buffer);
431	if (!symaddr)	473	if (!symaddr)
432	printf("Symbol %s not found.\n", argv->buffer);	474	printf("Symbol %s not found.\n", argv->buffer);
433	else if (symaddr == (__address) -1) {	475	else if (symaddr == (__address) -1) {
434	symtab_print_search(argv->buffer);	476	symtab_print_search(argv->buffer);
435	printf("Duplicate symbol, be more specific.\n");	477	printf("Duplicate symbol, be more specific.\n");
436	} else {	478	} else {
437	symbol = get_symtab_entry(symaddr);	479	symbol = get_symtab_entry(symaddr);
438	printf("Calling f(0x%x,0x%x): 0x%p: %s\n",	480	printf("Calling f(0x%x,0x%x): 0x%p: %s\n",
439	arg1, arg2, symaddr, symbol);	481	arg1, arg2, symaddr, symbol);
440	f = (__native (*)(__native,__native)) symaddr;	482	f = (__native (*)(__native,__native)) symaddr;
441	printf("Result: 0x%p\n", f(arg1, arg2));	483	printf("Result: 0x%p\n", f(arg1, arg2));
442	}	484	}
443		485
444	return 1;	486	return 1;
445	}	487	}
446		488
447	/** Call function with three parameters */	489	/** Call function with three parameters */
448	int cmd_call3(cmd_arg_t *argv)	490	int cmd_call3(cmd_arg_t *argv)
449	{	491	{
450	__address symaddr;	492	__address symaddr;
451	char *symbol;	493	char *symbol;
452	__native (*f)(__native,__native,__native);	494	__native (*f)(__native,__native,__native);
453	__native arg1 = argv[1].intval;	495	__native arg1 = argv[1].intval;
454	__native arg2 = argv[2].intval;	496	__native arg2 = argv[2].intval;
455	__native arg3 = argv[3].intval;	497	__native arg3 = argv[3].intval;
456		498
457	symaddr = get_symbol_addr(argv->buffer);	499	symaddr = get_symbol_addr(argv->buffer);
458	if (!symaddr)	500	if (!symaddr)

Subversion Repositories HelenOS-historic

(root)/kernel/trunk/generic/src/console/cmd.c @ 625 – Rev 625 → 668