WebSVN – HelenOS – Diff – /kernel/trunk/arch/amd64/src/asm_utils.S


#
# Copyright (C) 2005 Ondrej Palkovsky
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
#   derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
 
#define IREGISTER_SPACE 120
 
#define IOFFSET_RAX 0x0
#define IOFFSET_RBX 0x8
#define IOFFSET_RCX 0x10
#define IOFFSET_RDX 0x18
#define IOFFSET_RSI 0x20
#define IOFFSET_RDI 0x28
#define IOFFSET_R8 0x30
#define IOFFSET_R9 0x38
#define IOFFSET_R10 0x40
#define IOFFSET_R11 0x48
#define IOFFSET_R12 0x50
#define IOFFSET_R13 0x58
#define IOFFSET_R14 0x60
#define IOFFSET_R15 0x68
#define IOFFSET_RBP 0x70
 
#  Mask for interrupts 0 - 31 (bits 0 - 31) where 0 means that int has no error word
# and 1 means interrupt with error word
#define ERROR_WORD_INTERRUPT_LIST 0x00027D00
 
#include <arch/pm.h>
#include <arch/mm/page.h>
	
.text
.global interrupt_handlers
.global syscall_entry
.global panic_printf
 
panic_printf:
	movq $halt, (%rsp)
	jmp printf
 
 
 
 
 
.global cpuid
.global has_cpuid
.global rdtsc
.global read_efer_flag
.global set_efer_flag
.global memcpy
.global memcpy_from_uspace
.global memcpy_to_uspace
.global memcpy_from_uspace_failover_address
.global memcpy_to_uspace_failover_address
 
#define MEMCPY_DST	%rdi
#define MEMCPY_SRC	%rsi
#define MEMCPY_SIZE	%rdx
 
/**
 * Copy memory from/to userspace.
 *
 * This is almost conventional memcpy().
 * The difference is that there is a failover part
 * to where control is returned from a page fault if
 * the page fault occurs during copy_from_uspace()
 * or copy_to_uspace().
 *
 * @param MEMCPY_DST	Destination address.
 * @param MEMCPY_SRC	Source address.
 * @param MEMCPY_SIZE	Number of bytes to copy.
 *
 * @retrun MEMCPY_SRC on success, 0 on failure.
 */
memcpy:
memcpy_from_uspace:
memcpy_to_uspace:
	movq MEMCPY_SRC, %rax
 
	movq MEMCPY_SIZE, %rcx
	shrq $3, %rcx			/* size / 8 */
	
	rep movsq			/* copy as much as possible word by word */
 
	movq MEMCPY_SIZE, %rcx
	andq $7, %rcx			/* size % 8 */
	jz 0f
	
	rep movsb			/* copy the rest byte by byte */
	
0:
	ret				/* return MEMCPY_SRC, success */
 
memcpy_from_uspace_failover_address:
memcpy_to_uspace_failover_address:
	xorq %rax, %rax			/* return 0, failure */
	ret
 
## Determine CPUID support
#
# Return 0 in EAX if CPUID is not support, 1 if supported.
#
has_cpuid:
	pushfq			# store flags
	popq %rax		# read flags
	movq %rax,%rdx		# copy flags
	btcl $21,%edx		# swap the ID bit
	pushq %rdx
	popfq			# propagate the change into flags
	pushfq
	popq %rdx		# read flags	
	andl $(1<<21),%eax	# interested only in ID bit
	andl $(1<<21),%edx
	xorl %edx,%eax		# 0 if not supported, 1 if supported
	ret
 
cpuid:
	movq %rbx, %r10  # we have to preserve rbx across function calls
 
	movl %edi,%eax	# load the command into %eax
 
	cpuid	
	movl %eax,0(%rsi)
	movl %ebx,4(%rsi)
	movl %ecx,8(%rsi)
	movl %edx,12(%rsi)
 
	movq %r10, %rbx
	ret
 
rdtsc:
	xorq %rax,%rax
	rdtsc
	ret
 
set_efer_flag:
	movq $0xc0000080, %rcx
	rdmsr
	btsl %edi, %eax
	wrmsr
	ret
	
read_efer_flag:	
	movq $0xc0000080, %rcx
	rdmsr
	ret 		
 
# Push all general purpose registers on stack except %rbp, %rsp
.macro save_all_gpr
	movq %rax, IOFFSET_RAX(%rsp)
	movq %rcx, IOFFSET_RCX(%rsp)
	movq %rdx, IOFFSET_RDX(%rsp)
	movq %rsi, IOFFSET_RSI(%rsp)
	movq %rdi, IOFFSET_RDI(%rsp)
	movq %r8, IOFFSET_R8(%rsp)
	movq %r9, IOFFSET_R9(%rsp)
	movq %r10, IOFFSET_R10(%rsp)
	movq %r11, IOFFSET_R11(%rsp)
#ifdef CONFIG_DEBUG_ALLREGS	
	movq %rbx, IOFFSET_RBX(%rsp)
	movq %rbp, IOFFSET_RBP(%rsp)
	movq %r12, IOFFSET_R12(%rsp)
	movq %r13, IOFFSET_R13(%rsp)
	movq %r14, IOFFSET_R14(%rsp)
	movq %r15, IOFFSET_R15(%rsp)
#endif
.endm
 
.macro restore_all_gpr
	movq IOFFSET_RAX(%rsp), %rax
	movq IOFFSET_RCX(%rsp), %rcx
	movq IOFFSET_RDX(%rsp), %rdx
	movq IOFFSET_RSI(%rsp), %rsi
	movq IOFFSET_RDI(%rsp), %rdi
	movq IOFFSET_R8(%rsp), %r8
	movq IOFFSET_R9(%rsp), %r9
	movq IOFFSET_R10(%rsp), %r10
	movq IOFFSET_R11(%rsp), %r11
#ifdef CONFIG_DEBUG_ALLREGS	
	movq IOFFSET_RBX(%rsp), %rbx
	movq IOFFSET_RBP(%rsp), %rbp
	movq IOFFSET_R12(%rsp), %r12
	movq IOFFSET_R13(%rsp), %r13
	movq IOFFSET_R14(%rsp), %r14
	movq IOFFSET_R15(%rsp), %r15
#endif
.endm
 
#ifdef CONFIG_DEBUG_ALLREGS
# define INTERRUPT_ALIGN 256
#else
# define INTERRUPT_ALIGN 128
#endif
	
## Declare interrupt handlers
#
# Declare interrupt handlers for n interrupt
# vectors starting at vector i.
#
# The handlers call exc_dispatch().
#
.macro handler i n
 
	/*
	 * Choose between version with error code and version without error code.
	 * Both versions have to be of the same size. amd64 assembly is, however,
	 * a little bit tricky. For instance, subq $0x80, %rsp and subq $0x78, %rsp
	 * can result in two instructions with different op-code lengths.
	 * Therefore we align the interrupt handlers.
	 */
 
	.iflt \i-32
		.if (1 << \i) & ERROR_WORD_INTERRUPT_LIST
			/*
			 * Version with error word.
			 */
			subq $IREGISTER_SPACE, %rsp
		.else
			/*
			 * Version without error word,
			 */
			subq $(IREGISTER_SPACE+8), %rsp
		.endif
	.else
		/*
		 * Version without error word,
		 */
		subq $(IREGISTER_SPACE+8), %rsp
	.endif	
 
	save_all_gpr
 
	movq $(\i), %rdi   	# %rdi - first parameter
	movq %rsp, %rsi   	# %rsi - pointer to istate
	call exc_dispatch 	# exc_dispatch(i, istate)
	
	restore_all_gpr
	# $8 = Skip error word
	addq $(IREGISTER_SPACE+8), %rsp
	iretq
 
	.align INTERRUPT_ALIGN
	.if (\n-\i)-1
	handler "(\i+1)",\n
	.endif
.endm
 
.align INTERRUPT_ALIGN
interrupt_handlers:
h_start:
	handler 0 IDT_ITEMS
h_end:
 
	
syscall_entry:
	# Switch to hidden gs	
	swapgs
	# %gs:0 now points to pointer to stack page
	mov %gs:0, %r10     # We have a ptr to stack page in r10
	addq $PAGE_SIZE-16, %r10 # We need some space to store old %sp
	
	movq %rsp, 0(%r10)  # Save old stack pointer to stack
	movq %r10, %rsp     # Change to new stack
	pushq %rcx          # Return address
	pushq %r11          # Save flags
 
	# Switch back to remain consistent
	swapgs 
 
	sti
	movq %r9, %rcx      # Exchange last parameter as a third
	
	call syscall_handler
	cli                 # We will be touching stack pointer
		
	popq %r11
	popq %rcx
	movq 0(%rsp), %rsp
	sysretq
		
		
.data
.global interrupt_handler_size
 
interrupt_handler_size: .quad (h_end-h_start)/IDT_ITEMS
 

Rev 1278	Rev 1288
1	#	1	#
2	# Copyright (C) 2005 Ondrej Palkovsky	2	# Copyright (C) 2005 Ondrej Palkovsky
3	# All rights reserved.	3	# All rights reserved.
4	#	4	#
5	# Redistribution and use in source and binary forms, with or without	5	# Redistribution and use in source and binary forms, with or without
6	# modification, are permitted provided that the following conditions	6	# modification, are permitted provided that the following conditions
7	# are met:	7	# are met:
8	#	8	#
9	# - Redistributions of source code must retain the above copyright	9	# - Redistributions of source code must retain the above copyright
10	# notice, this list of conditions and the following disclaimer.	10	# notice, this list of conditions and the following disclaimer.
11	# - Redistributions in binary form must reproduce the above copyright	11	# - Redistributions in binary form must reproduce the above copyright
12	# notice, this list of conditions and the following disclaimer in the	12	# notice, this list of conditions and the following disclaimer in the
13	# documentation and/or other materials provided with the distribution.	13	# documentation and/or other materials provided with the distribution.
14	# - The name of the author may not be used to endorse or promote products	14	# - The name of the author may not be used to endorse or promote products
15	# derived from this software without specific prior written permission.	15	# derived from this software without specific prior written permission.
16	#	16	#
17	# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	#	27	#
28		28
29	#define IREGISTER_SPACE 120	29	#define IREGISTER_SPACE 120
30		30
31	#define IOFFSET_RAX 0x0	31	#define IOFFSET_RAX 0x0
32	#define IOFFSET_RBX 0x8	32	#define IOFFSET_RBX 0x8
33	#define IOFFSET_RCX 0x10	33	#define IOFFSET_RCX 0x10
34	#define IOFFSET_RDX 0x18	34	#define IOFFSET_RDX 0x18
35	#define IOFFSET_RSI 0x20	35	#define IOFFSET_RSI 0x20
36	#define IOFFSET_RDI 0x28	36	#define IOFFSET_RDI 0x28
37	#define IOFFSET_R8 0x30	37	#define IOFFSET_R8 0x30
38	#define IOFFSET_R9 0x38	38	#define IOFFSET_R9 0x38
39	#define IOFFSET_R10 0x40	39	#define IOFFSET_R10 0x40
40	#define IOFFSET_R11 0x48	40	#define IOFFSET_R11 0x48
41	#define IOFFSET_R12 0x50	41	#define IOFFSET_R12 0x50
42	#define IOFFSET_R13 0x58	42	#define IOFFSET_R13 0x58
43	#define IOFFSET_R14 0x60	43	#define IOFFSET_R14 0x60
44	#define IOFFSET_R15 0x68	44	#define IOFFSET_R15 0x68
45	#define IOFFSET_RBP 0x70	45	#define IOFFSET_RBP 0x70
46		46
47	# Mask for interrupts 0 - 31 (bits 0 - 31) where 0 means that int has no error word	47	# Mask for interrupts 0 - 31 (bits 0 - 31) where 0 means that int has no error word
48	# and 1 means interrupt with error word	48	# and 1 means interrupt with error word
49	#define ERROR_WORD_INTERRUPT_LIST 0x00027D00	49	#define ERROR_WORD_INTERRUPT_LIST 0x00027D00
50		50
51	#include <arch/pm.h>	51	#include <arch/pm.h>
52	#include <arch/mm/page.h>	52	#include <arch/mm/page.h>
53		53
54	.text	54	.text
55	.global interrupt_handlers	55	.global interrupt_handlers
56	.global syscall_entry	56	.global syscall_entry
57	.global panic_printf	57	.global panic_printf
58		58
59	panic_printf:	59	panic_printf:
60	movq $halt, (%rsp)	60	movq $halt, (%rsp)
61	jmp printf	61	jmp printf
62		62
63	.global memcpy	-
64	memcpy:	-
65	jmp _memcpy	-
66		-
67	.global cpuid	63	.global cpuid
68	.global has_cpuid	64	.global has_cpuid
69	.global rdtsc	65	.global rdtsc
70	.global read_efer_flag	66	.global read_efer_flag
71	.global set_efer_flag	67	.global set_efer_flag
-		68	.global memcpy
-		69	.global memcpy_from_uspace
-		70	.global memcpy_to_uspace
-		71	.global memcpy_from_uspace_failover_address
-		72	.global memcpy_to_uspace_failover_address
-		73
-		74	#define MEMCPY_DST %rdi
-		75	#define MEMCPY_SRC %rsi
-		76	#define MEMCPY_SIZE %rdx
-		77
-		78	/**
-		79	* Copy memory from/to userspace.
-		80	*
-		81	* This is almost conventional memcpy().
-		82	* The difference is that there is a failover part
-		83	* to where control is returned from a page fault if
-		84	* the page fault occurs during copy_from_uspace()
-		85	* or copy_to_uspace().
-		86	*
-		87	* @param MEMCPY_DST Destination address.
-		88	* @param MEMCPY_SRC Source address.
-		89	* @param MEMCPY_SIZE Number of bytes to copy.
-		90	*
-		91	* @retrun MEMCPY_SRC on success, 0 on failure.
-		92	*/
-		93	memcpy:
-		94	memcpy_from_uspace:
-		95	memcpy_to_uspace:
-		96	movq MEMCPY_SRC, %rax
-		97
-		98	movq MEMCPY_SIZE, %rcx
-		99	shrq $3, %rcx /* size / 8 */
-		100
-		101	rep movsq /* copy as much as possible word by word */
-		102
-		103	movq MEMCPY_SIZE, %rcx
-		104	andq $7, %rcx /* size % 8 */
-		105	jz 0f
72		106
-		107	rep movsb /* copy the rest byte by byte */
-		108
-		109	0:
-		110	ret /* return MEMCPY_SRC, success */
-		111
-		112	memcpy_from_uspace_failover_address:
-		113	memcpy_to_uspace_failover_address:
-		114	xorq %rax, %rax /* return 0, failure */
-		115	ret
-		116
73	## Determine CPUID support	117	## Determine CPUID support
74	#	118	#
75	# Return 0 in EAX if CPUID is not support, 1 if supported.	119	# Return 0 in EAX if CPUID is not support, 1 if supported.
76	#	120	#
77	has_cpuid:	121	has_cpuid:
78	pushfq # store flags	122	pushfq # store flags
79	popq %rax # read flags	123	popq %rax # read flags
80	movq %rax,%rdx # copy flags	124	movq %rax,%rdx # copy flags
81	btcl $21,%edx # swap the ID bit	125	btcl $21,%edx # swap the ID bit
82	pushq %rdx	126	pushq %rdx
83	popfq # propagate the change into flags	127	popfq # propagate the change into flags
84	pushfq	128	pushfq
85	popq %rdx # read flags	129	popq %rdx # read flags
86	andl $(1<<21),%eax # interested only in ID bit	130	andl $(1<<21),%eax # interested only in ID bit
87	andl $(1<<21),%edx	131	andl $(1<<21),%edx
88	xorl %edx,%eax # 0 if not supported, 1 if supported	132	xorl %edx,%eax # 0 if not supported, 1 if supported
89	ret	133	ret
90		134
91	cpuid:	135	cpuid:
92	movq %rbx, %r10 # we have to preserve rbx across function calls	136	movq %rbx, %r10 # we have to preserve rbx across function calls
93		137
94	movl %edi,%eax # load the command into %eax	138	movl %edi,%eax # load the command into %eax
95		139
96	cpuid	140	cpuid
97	movl %eax,0(%rsi)	141	movl %eax,0(%rsi)
98	movl %ebx,4(%rsi)	142	movl %ebx,4(%rsi)
99	movl %ecx,8(%rsi)	143	movl %ecx,8(%rsi)
100	movl %edx,12(%rsi)	144	movl %edx,12(%rsi)
101		145
102	movq %r10, %rbx	146	movq %r10, %rbx
103	ret	147	ret
104		148
105	rdtsc:	149	rdtsc:
106	xorq %rax,%rax	150	xorq %rax,%rax
107	rdtsc	151	rdtsc
108	ret	152	ret
109		153
110	set_efer_flag:	154	set_efer_flag:
111	movq $0xc0000080, %rcx	155	movq $0xc0000080, %rcx
112	rdmsr	156	rdmsr
113	btsl %edi, %eax	157	btsl %edi, %eax
114	wrmsr	158	wrmsr
115	ret	159	ret
116		160
117	read_efer_flag:	161	read_efer_flag:
118	movq $0xc0000080, %rcx	162	movq $0xc0000080, %rcx
119	rdmsr	163	rdmsr
120	ret	164	ret
121		165
122	# Push all general purpose registers on stack except %rbp, %rsp	166	# Push all general purpose registers on stack except %rbp, %rsp
123	.macro save_all_gpr	167	.macro save_all_gpr
124	movq %rax, IOFFSET_RAX(%rsp)	168	movq %rax, IOFFSET_RAX(%rsp)
125	movq %rcx, IOFFSET_RCX(%rsp)	169	movq %rcx, IOFFSET_RCX(%rsp)
126	movq %rdx, IOFFSET_RDX(%rsp)	170	movq %rdx, IOFFSET_RDX(%rsp)
127	movq %rsi, IOFFSET_RSI(%rsp)	171	movq %rsi, IOFFSET_RSI(%rsp)
128	movq %rdi, IOFFSET_RDI(%rsp)	172	movq %rdi, IOFFSET_RDI(%rsp)
129	movq %r8, IOFFSET_R8(%rsp)	173	movq %r8, IOFFSET_R8(%rsp)
130	movq %r9, IOFFSET_R9(%rsp)	174	movq %r9, IOFFSET_R9(%rsp)
131	movq %r10, IOFFSET_R10(%rsp)	175	movq %r10, IOFFSET_R10(%rsp)
132	movq %r11, IOFFSET_R11(%rsp)	176	movq %r11, IOFFSET_R11(%rsp)
133	#ifdef CONFIG_DEBUG_ALLREGS	177	#ifdef CONFIG_DEBUG_ALLREGS
134	movq %rbx, IOFFSET_RBX(%rsp)	178	movq %rbx, IOFFSET_RBX(%rsp)
135	movq %rbp, IOFFSET_RBP(%rsp)	179	movq %rbp, IOFFSET_RBP(%rsp)
136	movq %r12, IOFFSET_R12(%rsp)	180	movq %r12, IOFFSET_R12(%rsp)
137	movq %r13, IOFFSET_R13(%rsp)	181	movq %r13, IOFFSET_R13(%rsp)
138	movq %r14, IOFFSET_R14(%rsp)	182	movq %r14, IOFFSET_R14(%rsp)
139	movq %r15, IOFFSET_R15(%rsp)	183	movq %r15, IOFFSET_R15(%rsp)
140	#endif	184	#endif
141	.endm	185	.endm
142		186
143	.macro restore_all_gpr	187	.macro restore_all_gpr
144	movq IOFFSET_RAX(%rsp), %rax	188	movq IOFFSET_RAX(%rsp), %rax
145	movq IOFFSET_RCX(%rsp), %rcx	189	movq IOFFSET_RCX(%rsp), %rcx
146	movq IOFFSET_RDX(%rsp), %rdx	190	movq IOFFSET_RDX(%rsp), %rdx
147	movq IOFFSET_RSI(%rsp), %rsi	191	movq IOFFSET_RSI(%rsp), %rsi
148	movq IOFFSET_RDI(%rsp), %rdi	192	movq IOFFSET_RDI(%rsp), %rdi
149	movq IOFFSET_R8(%rsp), %r8	193	movq IOFFSET_R8(%rsp), %r8
150	movq IOFFSET_R9(%rsp), %r9	194	movq IOFFSET_R9(%rsp), %r9
151	movq IOFFSET_R10(%rsp), %r10	195	movq IOFFSET_R10(%rsp), %r10
152	movq IOFFSET_R11(%rsp), %r11	196	movq IOFFSET_R11(%rsp), %r11
153	#ifdef CONFIG_DEBUG_ALLREGS	197	#ifdef CONFIG_DEBUG_ALLREGS
154	movq IOFFSET_RBX(%rsp), %rbx	198	movq IOFFSET_RBX(%rsp), %rbx
155	movq IOFFSET_RBP(%rsp), %rbp	199	movq IOFFSET_RBP(%rsp), %rbp
156	movq IOFFSET_R12(%rsp), %r12	200	movq IOFFSET_R12(%rsp), %r12
157	movq IOFFSET_R13(%rsp), %r13	201	movq IOFFSET_R13(%rsp), %r13
158	movq IOFFSET_R14(%rsp), %r14	202	movq IOFFSET_R14(%rsp), %r14
159	movq IOFFSET_R15(%rsp), %r15	203	movq IOFFSET_R15(%rsp), %r15
160	#endif	204	#endif
161	.endm	205	.endm
162		206
163	#ifdef CONFIG_DEBUG_ALLREGS	207	#ifdef CONFIG_DEBUG_ALLREGS
164	# define INTERRUPT_ALIGN 256	208	# define INTERRUPT_ALIGN 256
165	#else	209	#else
166	# define INTERRUPT_ALIGN 128	210	# define INTERRUPT_ALIGN 128
167	#endif	211	#endif
168		212
169	## Declare interrupt handlers	213	## Declare interrupt handlers
170	#	214	#
171	# Declare interrupt handlers for n interrupt	215	# Declare interrupt handlers for n interrupt
172	# vectors starting at vector i.	216	# vectors starting at vector i.
173	#	217	#
174	# The handlers call exc_dispatch().	218	# The handlers call exc_dispatch().
175	#	219	#
176	.macro handler i n	220	.macro handler i n
177		221
178	/*	222	/*
179	* Choose between version with error code and version without error code.	223	* Choose between version with error code and version without error code.
180	* Both versions have to be of the same size. amd64 assembly is, however,	224	* Both versions have to be of the same size. amd64 assembly is, however,
181	* a little bit tricky. For instance, subq $0x80, %rsp and subq $0x78, %rsp	225	* a little bit tricky. For instance, subq $0x80, %rsp and subq $0x78, %rsp
182	* can result in two instructions with different op-code lengths.	226	* can result in two instructions with different op-code lengths.
183	* Therefore we align the interrupt handlers.	227	* Therefore we align the interrupt handlers.
184	*/	228	*/
185		229
186	.iflt \i-32	230	.iflt \i-32
187	.if (1 << \i) & ERROR_WORD_INTERRUPT_LIST	231	.if (1 << \i) & ERROR_WORD_INTERRUPT_LIST
188	/*	232	/*
189	* Version with error word.	233	* Version with error word.
190	*/	234	*/
191	subq $IREGISTER_SPACE, %rsp	235	subq $IREGISTER_SPACE, %rsp
192	.else	236	.else
193	/*	237	/*
194	* Version without error word,	238	* Version without error word,
195	*/	239	*/
196	subq $(IREGISTER_SPACE+8), %rsp	240	subq $(IREGISTER_SPACE+8), %rsp
197	.endif	241	.endif
198	.else	242	.else
199	/*	243	/*
200	* Version without error word,	244	* Version without error word,
201	*/	245	*/
202	subq $(IREGISTER_SPACE+8), %rsp	246	subq $(IREGISTER_SPACE+8), %rsp
203	.endif	247	.endif
204		248
205	save_all_gpr	249	save_all_gpr
206		250
207	movq $(\i), %rdi # %rdi - first parameter	251	movq $(\i), %rdi # %rdi - first parameter
208	movq %rsp, %rsi # %rsi - pointer to istate	252	movq %rsp, %rsi # %rsi - pointer to istate
209	call exc_dispatch # exc_dispatch(i, istate)	253	call exc_dispatch # exc_dispatch(i, istate)
210		254
211	restore_all_gpr	255	restore_all_gpr
212	# $8 = Skip error word	256	# $8 = Skip error word
213	addq $(IREGISTER_SPACE+8), %rsp	257	addq $(IREGISTER_SPACE+8), %rsp
214	iretq	258	iretq
215		259
216	.align INTERRUPT_ALIGN	260	.align INTERRUPT_ALIGN
217	.if (\n-\i)-1	261	.if (\n-\i)-1
218	handler "(\i+1)",\n	262	handler "(\i+1)",\n
219	.endif	263	.endif
220	.endm	264	.endm
221		265
222	.align INTERRUPT_ALIGN	266	.align INTERRUPT_ALIGN
223	interrupt_handlers:	267	interrupt_handlers:
224	h_start:	268	h_start:
225	handler 0 IDT_ITEMS	269	handler 0 IDT_ITEMS
226	h_end:	270	h_end:
227		271
228		272
229	syscall_entry:	273	syscall_entry:
230	# Switch to hidden gs	274	# Switch to hidden gs
231	swapgs	275	swapgs
232	# %gs:0 now points to pointer to stack page	276	# %gs:0 now points to pointer to stack page
233	mov %gs:0, %r10 # We have a ptr to stack page in r10	277	mov %gs:0, %r10 # We have a ptr to stack page in r10
234	addq $PAGE_SIZE-16, %r10 # We need some space to store old %sp	278	addq $PAGE_SIZE-16, %r10 # We need some space to store old %sp
235		279
236	movq %rsp, 0(%r10) # Save old stack pointer to stack	280	movq %rsp, 0(%r10) # Save old stack pointer to stack
237	movq %r10, %rsp # Change to new stack	281	movq %r10, %rsp # Change to new stack
238	pushq %rcx # Return address	282	pushq %rcx # Return address
239	pushq %r11 # Save flags	283	pushq %r11 # Save flags
240		284
241	# Switch back to remain consistent	285	# Switch back to remain consistent
242	swapgs	286	swapgs
243		287
244	sti	288	sti
245	movq %r9, %rcx # Exchange last parameter as a third	289	movq %r9, %rcx # Exchange last parameter as a third
246		290
247	call syscall_handler	291	call syscall_handler
248	cli # We will be touching stack pointer	292	cli # We will be touching stack pointer
249		293
250	popq %r11	294	popq %r11
251	popq %rcx	295	popq %rcx
252	movq 0(%rsp), %rsp	296	movq 0(%rsp), %rsp
253	sysretq	297	sysretq
254		298
255		299
256	.data	300	.data
257	.global interrupt_handler_size	301	.global interrupt_handler_size
258		302
259	interrupt_handler_size: .quad (h_end-h_start)/IDT_ITEMS	303	interrupt_handler_size: .quad (h_end-h_start)/IDT_ITEMS
260		304

Subversion Repositories HelenOS

(root)/kernel/trunk/arch/amd64/src/asm_utils.S – Rev 1278 → 1288