WebSVN – HelenOS – Diff – /branches/sparc/kernel/generic/src/main/main.c


/*
 * Copyright (c) 2001-2004 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/** @addtogroup main
 * @{
 */
 
/**
 * @file
 * @brief   Main initialization kernel function for all processors.
 *
 * During kernel boot, all processors, after architecture dependent
 * initialization, start executing code found in this file. After
 * bringing up all subsystems, control is passed to scheduler().
 *
 * The bootstrap processor starts executing main_bsp() while
 * the application processors start executing main_ap().
 *
 * @see scheduler()
 * @see main_bsp()
 * @see main_ap()
 */
 
#include <arch/asm.h>
#include <context.h>
#include <print.h>
#include <panic.h>
#include <debug.h>
#include <config.h>
#include <time/clock.h>
#include <time/timeout.h>
#include <proc/scheduler.h>
#include <proc/thread.h>
#include <proc/task.h>
#include <proc/tasklet.h>
#include <main/kinit.h>
#include <main/version.h>
#include <console/kconsole.h>
#include <cpu.h>
#include <align.h>
#include <interrupt.h>
#include <mm/frame.h>
#include <mm/page.h>
#include <genarch/mm/page_pt.h>
#include <mm/tlb.h>
#include <mm/as.h>
#include <mm/slab.h>
#include <synch/waitq.h>
#include <synch/futex.h>
#include <arch/arch.h>
#include <arch.h>
#include <arch/faddr.h>
#include <ipc/ipc.h>
#include <macros.h>
#include <adt/btree.h>
#include <smp/smp.h>
#include <ddi/ddi.h>
#include <console/console.h>
 
/** Global configuration structure. */
config_t config;
 
/** Initial user-space tasks */
init_t init = {
    .cnt = 0
};
 
/** Boot allocations. */
ballocs_t ballocs = {
    .base = NULL,
    .size = 0
};
 
context_t ctx;
 
/*
 * These 'hardcoded' variables will be intialized by
 * the linker or the low level assembler code with
 * appropriate sizes and addresses.
 */
 
/**< Virtual address of where the kernel is loaded. */
uintptr_t hardcoded_load_address = 0;
/**< Size of the kernel code in bytes. */
size_t hardcoded_ktext_size = 0;
/**< Size of the kernel data in bytes. */
size_t hardcoded_kdata_size = 0;
/**< Lowest safe stack virtual address. */
uintptr_t stack_safe = 0;      
 
void main_bsp(void);
void main_ap(void);
 
/*
 * These two functions prevent stack from underflowing during the
 * kernel boot phase when SP is set to the very top of the reserved
 * space. The stack could get corrupted by a fooled compiler-generated
 * pop sequence otherwise.
 */
static void main_bsp_separated_stack(void);
#ifdef CONFIG_SMP
static void main_ap_separated_stack(void);
#endif
 
#define CONFIG_STACK_SIZE   ((1 << STACK_FRAMES) * STACK_SIZE)
 
/** Main kernel routine for bootstrap CPU.
 *
 * The code here still runs on the boot stack, which knows nothing about
 * preemption counts.  Because of that, this function cannot directly call
 * functions that disable or enable preemption (e.g. spinlock_lock()). The
 * primary task of this function is to calculate address of a new stack and
 * switch to it.
 *
 * Assuming interrupts_disable().
 *
 */
void main_bsp(void)
{
 
 
    config.cpu_count = 1;
    config.cpu_active = 1;
   
    config.base = hardcoded_load_address;
    config.kernel_size = ALIGN_UP(hardcoded_ktext_size +
        hardcoded_kdata_size, PAGE_SIZE);
    config.stack_size = CONFIG_STACK_SIZE;
   
    /* Initialy the stack is placed just after the kernel */
    config.stack_base = config.base + config.kernel_size;
   
    /* Avoid placing stack on top of init */
    count_t i;
    for (i = 0; i < init.cnt; i++) {
        if (PA_overlaps(config.stack_base, config.stack_size,
            init.tasks[i].addr, init.tasks[i].size))
            config.stack_base = ALIGN_UP(init.tasks[i].addr +
                init.tasks[i].size, config.stack_size);
    }
 
    /* Avoid placing stack on top of boot allocations. */
    if (ballocs.size) {
        if (PA_overlaps(config.stack_base, config.stack_size,
            ballocs.base, ballocs.size))
            config.stack_base = ALIGN_UP(ballocs.base +
                ballocs.size, PAGE_SIZE);
    }
   
    if (config.stack_base < stack_safe)
        config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);
   
 
 
 
 
 
 
 
    context_save(&ctx);
    context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,
        THREAD_STACK_SIZE);
    context_restore(&ctx);
    /* not reached */
}
 
 
/** Main kernel routine for bootstrap CPU using new stack.
 *
 * Second part of main_bsp().
 *
 */
void main_bsp_separated_stack(void)
{
    /* Keep this the first thing. */
    the_initialize(THE);
 
    LOG();
   
    version_print();
   
    LOG("\nconfig.base=%#" PRIp " config.kernel_size=%" PRIs
        "\nconfig.stack_base=%#" PRIp " config.stack_size=%" PRIs,
        config.base, config.kernel_size, config.stack_base,
        config.stack_size);
   
 
    /*
     * kconsole data structures must be initialized very early
     * because other subsystems will register their respective
     * commands.
     */
    LOG_EXEC(kconsole_init());
   
    /*
     * Exception handler initialization, before architecture
     * starts adding its own handlers
     */
    LOG_EXEC(exc_init());
 
    /*
     * Memory management subsystems initialization.
     */
    LOG_EXEC(arch_pre_mm_init());
    LOG_EXEC(frame_init());
   
    /* Initialize at least 1 memory segment big enough for slab to work. */
    LOG_EXEC(slab_cache_init());
    LOG_EXEC(btree_init());
    LOG_EXEC(as_init());
    LOG_EXEC(page_init());
    LOG_EXEC(tlb_init());
    LOG_EXEC(ddi_init());
    LOG_EXEC(tasklet_init());
    LOG_EXEC(arch_post_mm_init());
    LOG_EXEC(arch_pre_smp_init());
    LOG_EXEC(smp_init());
   
    /* Slab must be initialized after we know the number of processors. */
    LOG_EXEC(slab_enable_cpucache());
   
    printf("Detected %" PRIc " CPU(s), %" PRIu64" MB free memory\n",
        config.cpu_count, SIZE2MB(zone_total_size()));
   
    LOG_EXEC(cpu_init());
   
    LOG_EXEC(calibrate_delay_loop());
    LOG_EXEC(clock_counter_init());
    LOG_EXEC(timeout_init());
    LOG_EXEC(scheduler_init());
    LOG_EXEC(task_init());
    LOG_EXEC(thread_init());
    LOG_EXEC(futex_init());
   
    if (init.cnt > 0) {
        count_t i;
        for (i = 0; i < init.cnt; i++)
            printf("init[%" PRIc "].addr=%#" PRIp ", init[%" PRIc
 
                "].size=%#" PRIs "\n", i, init.tasks[i].addr,
                i, init.tasks[i].size);
    } else
        printf("No init binaries found\n");
   
    LOG_EXEC(ipc_init());
    LOG_EXEC(klog_init());
 
    /*
     * Create kernel task.
     */
    task_t *kernel = task_create(AS_KERNEL, "kernel");
    if (!kernel)
        panic("Can't create kernel task\n");
   
    /*
     * Create the first thread.
     */
    thread_t *kinit_thread = thread_create(kinit, NULL, kernel, 0, "kinit",
        true);
    if (!kinit_thread)
        panic("Can't create kinit thread\n");
    LOG_EXEC(thread_ready(kinit_thread));
   
    /*
     * This call to scheduler() will return to kinit,
     * starting the thread of kernel threads.
     */
    scheduler();
    /* not reached */
}
 
 
#ifdef CONFIG_SMP
/** Main kernel routine for application CPUs.
 *
 * Executed by application processors, temporary stack
 * is at ctx.sp which was set during BSP boot.
 * This function passes control directly to
 * main_ap_separated_stack().
 *
 * Assuming interrupts_disable()'d.
 *
 */
void main_ap(void)
{
    /*
     * Incrementing the active CPU counter will guarantee that the
     * *_init() functions can find out that they need to
     * do initialization for AP only.
     */
    config.cpu_active++;
 
    /*
     * The THE structure is well defined because ctx.sp is used as stack.
     */
    the_initialize(THE);
   
    arch_pre_mm_init();
    frame_init();
    page_init();
    tlb_init();
    arch_post_mm_init();
   
    cpu_init();
    calibrate_delay_loop();
    arch_post_cpu_init();
 
    the_copy(THE, (the_t *) CPU->stack);
 
    /*
     * If we woke kmp up before we left the kernel stack, we could
     * collide with another CPU coming up. To prevent this, we
     * switch to this cpu's private stack prior to waking kmp up.
     */
    context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),
        (uintptr_t) CPU->stack, CPU_STACK_SIZE);
    context_restore(&CPU->saved_context);
    /* not reached */
}
 
 
/** Main kernel routine for application CPUs using new stack.
 *
 * Second part of main_ap().
 *
 */
void main_ap_separated_stack(void)
{
    /*
     * Configure timeouts for this cpu.
     */
    timeout_init();
 
    waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
    scheduler();
    /* not reached */
}
#endif /* CONFIG_SMP */
 
/** @}
 */
 

Rev 3097	Rev 3175
1	/*	1	/*
2	* Copyright (c) 2001-2004 Jakub Jermar	2	* Copyright (c) 2001-2004 Jakub Jermar
3	* All rights reserved.	3	* All rights reserved.
4	*	4	*
5	* Redistribution and use in source and binary forms, with or without	5	* Redistribution and use in source and binary forms, with or without
6	* modification, are permitted provided that the following conditions	6	* modification, are permitted provided that the following conditions
7	* are met:	7	* are met:
8	*	8	*
9	* - Redistributions of source code must retain the above copyright	9	* - Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.	10	* notice, this list of conditions and the following disclaimer.
11	* - Redistributions in binary form must reproduce the above copyright	11	* - Redistributions in binary form must reproduce the above copyright
12	* notice, this list of conditions and the following disclaimer in the	12	* notice, this list of conditions and the following disclaimer in the
13	* documentation and/or other materials provided with the distribution.	13	* documentation and/or other materials provided with the distribution.
14	* - The name of the author may not be used to endorse or promote products	14	* - The name of the author may not be used to endorse or promote products
15	* derived from this software without specific prior written permission.	15	* derived from this software without specific prior written permission.
16	*	16	*
17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	*/	27	*/
28		28
29	/** @addtogroup main	29	/** @addtogroup main
30	* @{	30	* @{
31	*/	31	*/
32		32
33	/**	33	/**
34	* @file	34	* @file
35	* @brief Main initialization kernel function for all processors.	35	* @brief Main initialization kernel function for all processors.
36	*	36	*
37	* During kernel boot, all processors, after architecture dependent	37	* During kernel boot, all processors, after architecture dependent
38	* initialization, start executing code found in this file. After	38	* initialization, start executing code found in this file. After
39	* bringing up all subsystems, control is passed to scheduler().	39	* bringing up all subsystems, control is passed to scheduler().
40	*	40	*
41	* The bootstrap processor starts executing main_bsp() while	41	* The bootstrap processor starts executing main_bsp() while
42	* the application processors start executing main_ap().	42	* the application processors start executing main_ap().
43	*	43	*
44	* @see scheduler()	44	* @see scheduler()
45	* @see main_bsp()	45	* @see main_bsp()
46	* @see main_ap()	46	* @see main_ap()
47	*/	47	*/
48		48
49	#include <arch/asm.h>	49	#include <arch/asm.h>
50	#include <context.h>	50	#include <context.h>
51	#include <print.h>	51	#include <print.h>
52	#include <panic.h>	52	#include <panic.h>
53	#include <debug.h>	53	#include <debug.h>
54	#include <config.h>	54	#include <config.h>
55	#include <time/clock.h>	55	#include <time/clock.h>
56	#include <time/timeout.h>	56	#include <time/timeout.h>
57	#include <proc/scheduler.h>	57	#include <proc/scheduler.h>
58	#include <proc/thread.h>	58	#include <proc/thread.h>
59	#include <proc/task.h>	59	#include <proc/task.h>
60	#include <proc/tasklet.h>	60	#include <proc/tasklet.h>
61	#include <main/kinit.h>	61	#include <main/kinit.h>
62	#include <main/version.h>	62	#include <main/version.h>
63	#include <console/kconsole.h>	63	#include <console/kconsole.h>
64	#include <cpu.h>	64	#include <cpu.h>
65	#include <align.h>	65	#include <align.h>
66	#include <interrupt.h>	66	#include <interrupt.h>
67	#include <mm/frame.h>	67	#include <mm/frame.h>
68	#include <mm/page.h>	68	#include <mm/page.h>
69	#include <genarch/mm/page_pt.h>	69	#include <genarch/mm/page_pt.h>
70	#include <mm/tlb.h>	70	#include <mm/tlb.h>
71	#include <mm/as.h>	71	#include <mm/as.h>
72	#include <mm/slab.h>	72	#include <mm/slab.h>
73	#include <synch/waitq.h>	73	#include <synch/waitq.h>
74	#include <synch/futex.h>	74	#include <synch/futex.h>
75	#include <arch/arch.h>	75	#include <arch/arch.h>
76	#include <arch.h>	76	#include <arch.h>
77	#include <arch/faddr.h>	77	#include <arch/faddr.h>
78	#include <ipc/ipc.h>	78	#include <ipc/ipc.h>
79	#include <macros.h>	79	#include <macros.h>
80	#include <adt/btree.h>	80	#include <adt/btree.h>
81	#include <smp/smp.h>	81	#include <smp/smp.h>
82	#include <ddi/ddi.h>	82	#include <ddi/ddi.h>
83	#include <console/console.h>	83	#include <console/console.h>
84		84
85	/** Global configuration structure. */	85	/** Global configuration structure. */
86	config_t config;	86	config_t config;
87		87
88	/** Initial user-space tasks */	88	/** Initial user-space tasks */
89	init_t init = {	89	init_t init = {
90	.cnt = 0	90	.cnt = 0
91	};	91	};
92		92
93	/** Boot allocations. */	93	/** Boot allocations. */
94	ballocs_t ballocs = {	94	ballocs_t ballocs = {
95	.base = NULL,	95	.base = NULL,
96	.size = 0	96	.size = 0
97	};	97	};
98		98
99	context_t ctx;	99	context_t ctx;
100		100
101	/*	101	/*
102	* These 'hardcoded' variables will be intialized by	102	* These 'hardcoded' variables will be intialized by
103	* the linker or the low level assembler code with	103	* the linker or the low level assembler code with
104	* appropriate sizes and addresses.	104	* appropriate sizes and addresses.
105	*/	105	*/
106		106
107	/*< Virtual address of where the kernel is loaded. /	107	/*< Virtual address of where the kernel is loaded. /
108	uintptr_t hardcoded_load_address = 0;	108	uintptr_t hardcoded_load_address = 0;
109	/*< Size of the kernel code in bytes. /	109	/*< Size of the kernel code in bytes. /
110	size_t hardcoded_ktext_size = 0;	110	size_t hardcoded_ktext_size = 0;
111	/*< Size of the kernel data in bytes. /	111	/*< Size of the kernel data in bytes. /
112	size_t hardcoded_kdata_size = 0;	112	size_t hardcoded_kdata_size = 0;
113	/*< Lowest safe stack virtual address. /	113	/*< Lowest safe stack virtual address. /
114	uintptr_t stack_safe = 0;	114	uintptr_t stack_safe = 0;
115		115
116	void main_bsp(void);	116	void main_bsp(void);
117	void main_ap(void);	117	void main_ap(void);
118		118
119	/*	119	/*
120	* These two functions prevent stack from underflowing during the	120	* These two functions prevent stack from underflowing during the
121	* kernel boot phase when SP is set to the very top of the reserved	121	* kernel boot phase when SP is set to the very top of the reserved
122	* space. The stack could get corrupted by a fooled compiler-generated	122	* space. The stack could get corrupted by a fooled compiler-generated
123	* pop sequence otherwise.	123	* pop sequence otherwise.
124	*/	124	*/
125	static void main_bsp_separated_stack(void);	125	static void main_bsp_separated_stack(void);
126	#ifdef CONFIG_SMP	126	#ifdef CONFIG_SMP
127	static void main_ap_separated_stack(void);	127	static void main_ap_separated_stack(void);
128	#endif	128	#endif
129		129
130	#define CONFIG_STACK_SIZE ((1 << STACK_FRAMES) * STACK_SIZE)	130	#define CONFIG_STACK_SIZE ((1 << STACK_FRAMES) * STACK_SIZE)
131		131
132	/** Main kernel routine for bootstrap CPU.	132	/** Main kernel routine for bootstrap CPU.
133	*	133	*
134	* Initializes the kernel by bootstrap CPU.	134	* The code here still runs on the boot stack, which knows nothing about
135	* This function passes control directly to	135	* preemption counts. Because of that, this function cannot directly call
-		136	* functions that disable or enable preemption (e.g. spinlock_lock()). The
-		137	* primary task of this function is to calculate address of a new stack and
136	* main_bsp_separated_stack().	138	* switch to it.
137	*	139	*
138	* Assuming interrupts_disable().	140	* Assuming interrupts_disable().
139	*	141	*
140	*/	142	*/
141	void main_bsp(void)	143	void main_bsp(void)
142	{	144	{
143	LOG();	-
144		-
145	config.cpu_count = 1;	145	config.cpu_count = 1;
146	config.cpu_active = 1;	146	config.cpu_active = 1;
147		147
148	config.base = hardcoded_load_address;	148	config.base = hardcoded_load_address;
149	config.kernel_size = ALIGN_UP(hardcoded_ktext_size +	149	config.kernel_size = ALIGN_UP(hardcoded_ktext_size +
150	hardcoded_kdata_size, PAGE_SIZE);	150	hardcoded_kdata_size, PAGE_SIZE);
151	config.stack_size = CONFIG_STACK_SIZE;	151	config.stack_size = CONFIG_STACK_SIZE;
152		152
153	/* Initialy the stack is placed just after the kernel */	153	/* Initialy the stack is placed just after the kernel */
154	config.stack_base = config.base + config.kernel_size;	154	config.stack_base = config.base + config.kernel_size;
155		155
156	/* Avoid placing stack on top of init */	156	/* Avoid placing stack on top of init */
157	count_t i;	157	count_t i;
158	for (i = 0; i < init.cnt; i++) {	158	for (i = 0; i < init.cnt; i++) {
159	if (PA_overlaps(config.stack_base, config.stack_size,	159	if (PA_overlaps(config.stack_base, config.stack_size,
160	init.tasks[i].addr, init.tasks[i].size))	160	init.tasks[i].addr, init.tasks[i].size))
161	config.stack_base = ALIGN_UP(init.tasks[i].addr +	161	config.stack_base = ALIGN_UP(init.tasks[i].addr +
162	init.tasks[i].size, config.stack_size);	162	init.tasks[i].size, config.stack_size);
163	}	163	}
164		164
165	/* Avoid placing stack on top of boot allocations. */	165	/* Avoid placing stack on top of boot allocations. */
166	if (ballocs.size) {	166	if (ballocs.size) {
167	if (PA_overlaps(config.stack_base, config.stack_size,	167	if (PA_overlaps(config.stack_base, config.stack_size,
168	ballocs.base, ballocs.size))	168	ballocs.base, ballocs.size))
169	config.stack_base = ALIGN_UP(ballocs.base +	169	config.stack_base = ALIGN_UP(ballocs.base +
170	ballocs.size, PAGE_SIZE);	170	ballocs.size, PAGE_SIZE);
171	}	171	}
172		172
173	if (config.stack_base < stack_safe)	173	if (config.stack_base < stack_safe)
174	config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);	174	config.stack_base = ALIGN_UP(stack_safe, PAGE_SIZE);
175		175
176	version_print();	-
177		-
178	LOG("\nconfig.base=%#" PRIp " config.kernel_size=%" PRIs	-
179	"\nconfig.stack_base=%#" PRIp " config.stack_size=%" PRIs,	-
180	config.base, config.kernel_size,	-
181	config.stack_base, config.stack_size);	-
182		-
183	context_save(&ctx);	176	context_save(&ctx);
184	context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,	177	context_set(&ctx, FADDR(main_bsp_separated_stack), config.stack_base,
185	THREAD_STACK_SIZE);	178	THREAD_STACK_SIZE);
186	context_restore(&ctx);	179	context_restore(&ctx);
187	/* not reached */	180	/* not reached */
188	}	181	}
189		182
190		183
191	/** Main kernel routine for bootstrap CPU using new stack.	184	/** Main kernel routine for bootstrap CPU using new stack.
192	*	185	*
193	* Second part of main_bsp().	186	* Second part of main_bsp().
194	*	187	*
195	*/	188	*/
196	void main_bsp_separated_stack(void)	189	void main_bsp_separated_stack(void)
197	{	190	{
-		191	/* Keep this the first thing. */
-		192	the_initialize(THE);
-		193
198	LOG();	194	LOG();
199		195
200	the_initialize(THE);	196	version_print();
-		197
-		198	LOG("\nconfig.base=%#" PRIp " config.kernel_size=%" PRIs
-		199	"\nconfig.stack_base=%#" PRIp " config.stack_size=%" PRIs,
-		200	config.base, config.kernel_size, config.stack_base,
-		201	config.stack_size);
-		202
201		203
202	/*	204	/*
203	* kconsole data structures must be initialized very early	205	* kconsole data structures must be initialized very early
204	* because other subsystems will register their respective	206	* because other subsystems will register their respective
205	* commands.	207	* commands.
206	*/	208	*/
207	LOG_EXEC(kconsole_init());	209	LOG_EXEC(kconsole_init());
208		210
209	/*	211	/*
210	* Exception handler initialization, before architecture	212	* Exception handler initialization, before architecture
211	* starts adding its own handlers	213	* starts adding its own handlers
212	*/	214	*/
213	LOG_EXEC(exc_init());	215	LOG_EXEC(exc_init());
214		216
215	/*	217	/*
216	* Memory management subsystems initialization.	218	* Memory management subsystems initialization.
217	*/	219	*/
218	LOG_EXEC(arch_pre_mm_init());	220	LOG_EXEC(arch_pre_mm_init());
219	LOG_EXEC(frame_init());	221	LOG_EXEC(frame_init());
220		222
221	/* Initialize at least 1 memory segment big enough for slab to work. */	223	/* Initialize at least 1 memory segment big enough for slab to work. */
222	LOG_EXEC(slab_cache_init());	224	LOG_EXEC(slab_cache_init());
223	LOG_EXEC(btree_init());	225	LOG_EXEC(btree_init());
224	LOG_EXEC(as_init());	226	LOG_EXEC(as_init());
225	LOG_EXEC(page_init());	227	LOG_EXEC(page_init());
226	LOG_EXEC(tlb_init());	228	LOG_EXEC(tlb_init());
227	LOG_EXEC(ddi_init());	229	LOG_EXEC(ddi_init());
228	LOG_EXEC(tasklet_init());	230	LOG_EXEC(tasklet_init());
229	LOG_EXEC(arch_post_mm_init());	231	LOG_EXEC(arch_post_mm_init());
230	LOG_EXEC(arch_pre_smp_init());	232	LOG_EXEC(arch_pre_smp_init());
231	LOG_EXEC(smp_init());	233	LOG_EXEC(smp_init());
232		234
233	/* Slab must be initialized after we know the number of processors. */	235	/* Slab must be initialized after we know the number of processors. */
234	LOG_EXEC(slab_enable_cpucache());	236	LOG_EXEC(slab_enable_cpucache());
235		237
236	printf("Detected %" PRIc " CPU(s), %" PRIu64" MB free memory\n",	238	printf("Detected %" PRIc " CPU(s), %" PRIu64" MB free memory\n",
237	config.cpu_count, SIZE2MB(zone_total_size()));	239	config.cpu_count, SIZE2MB(zone_total_size()));
238		240
239	LOG_EXEC(cpu_init());	241	LOG_EXEC(cpu_init());
240		242
241	LOG_EXEC(calibrate_delay_loop());	243	LOG_EXEC(calibrate_delay_loop());
242	LOG_EXEC(clock_counter_init());	244	LOG_EXEC(clock_counter_init());
243	LOG_EXEC(timeout_init());	245	LOG_EXEC(timeout_init());
244	LOG_EXEC(scheduler_init());	246	LOG_EXEC(scheduler_init());
245	LOG_EXEC(task_init());	247	LOG_EXEC(task_init());
246	LOG_EXEC(thread_init());	248	LOG_EXEC(thread_init());
247	LOG_EXEC(futex_init());	249	LOG_EXEC(futex_init());
248		250
249	if (init.cnt > 0) {	251	if (init.cnt > 0) {
250	count_t i;	252	count_t i;
251	for (i = 0; i < init.cnt; i++)	253	for (i = 0; i < init.cnt; i++)
252	printf("init[%" PRIc "].addr=%#" PRIp	254	printf("init[%" PRIc "].addr=%#" PRIp ", init[%" PRIc
253	", init[%" PRIc "].size=%#" PRIs "\n",	-
254	i, init.tasks[i].addr,	255	"].size=%#" PRIs "\n", i, init.tasks[i].addr,
255	i, init.tasks[i].size);	256	i, init.tasks[i].size);
256	} else	257	} else
257	printf("No init binaries found\n");	258	printf("No init binaries found\n");
258		259
259	LOG_EXEC(ipc_init());	260	LOG_EXEC(ipc_init());
260	LOG_EXEC(klog_init());	261	LOG_EXEC(klog_init());
261		262
262	/*	263	/*
263	* Create kernel task.	264	* Create kernel task.
264	*/	265	*/
265	task_t *kernel = task_create(AS_KERNEL, "kernel");	266	task_t *kernel = task_create(AS_KERNEL, "kernel");
266	if (!kernel)	267	if (!kernel)
267	panic("Can't create kernel task\n");	268	panic("Can't create kernel task\n");
268		269
269	/*	270	/*
270	* Create the first thread.	271	* Create the first thread.
271	*/	272	*/
272	thread_t *kinit_thread = thread_create(kinit, NULL, kernel, 0, "kinit", true);	273	thread_t *kinit_thread = thread_create(kinit, NULL, kernel, 0, "kinit",
-		274	true);
273	if (!kinit_thread)	275	if (!kinit_thread)
274	panic("Can't create kinit thread\n");	276	panic("Can't create kinit thread\n");
275	LOG_EXEC(thread_ready(kinit_thread));	277	LOG_EXEC(thread_ready(kinit_thread));
276		278
277	/*	279	/*
278	* This call to scheduler() will return to kinit,	280	* This call to scheduler() will return to kinit,
279	* starting the thread of kernel threads.	281	* starting the thread of kernel threads.
280	*/	282	*/
281	scheduler();	283	scheduler();
282	/* not reached */	284	/* not reached */
283	}	285	}
284		286
285		287
286	#ifdef CONFIG_SMP	288	#ifdef CONFIG_SMP
287	/** Main kernel routine for application CPUs.	289	/** Main kernel routine for application CPUs.
288	*	290	*
289	* Executed by application processors, temporary stack	291	* Executed by application processors, temporary stack
290	* is at ctx.sp which was set during BSP boot.	292	* is at ctx.sp which was set during BSP boot.
291	* This function passes control directly to	293	* This function passes control directly to
292	* main_ap_separated_stack().	294	* main_ap_separated_stack().
293	*	295	*
294	* Assuming interrupts_disable()'d.	296	* Assuming interrupts_disable()'d.
295	*	297	*
296	*/	298	*/
297	void main_ap(void)	299	void main_ap(void)
298	{	300	{
299	/*	301	/*
300	* Incrementing the active CPU counter will guarantee that the	302	* Incrementing the active CPU counter will guarantee that the
301	* *_init() functions can find out that they need to	303	* *_init() functions can find out that they need to
302	* do initialization for AP only.	304	* do initialization for AP only.
303	*/	305	*/
304	config.cpu_active++;	306	config.cpu_active++;
305		307
306	/*	308	/*
307	* The THE structure is well defined because ctx.sp is used as stack.	309	* The THE structure is well defined because ctx.sp is used as stack.
308	*/	310	*/
309	the_initialize(THE);	311	the_initialize(THE);
310		312
311	arch_pre_mm_init();	313	arch_pre_mm_init();
312	frame_init();	314	frame_init();
313	page_init();	315	page_init();
314	tlb_init();	316	tlb_init();
315	arch_post_mm_init();	317	arch_post_mm_init();
316		318
317	cpu_init();	319	cpu_init();
318	calibrate_delay_loop();	320	calibrate_delay_loop();
319	arch_post_cpu_init();	321	arch_post_cpu_init();
320		322
321	the_copy(THE, (the_t *) CPU->stack);	323	the_copy(THE, (the_t *) CPU->stack);
322		324
323	/*	325	/*
324	* If we woke kmp up before we left the kernel stack, we could	326	* If we woke kmp up before we left the kernel stack, we could
325	* collide with another CPU coming up. To prevent this, we	327	* collide with another CPU coming up. To prevent this, we
326	* switch to this cpu's private stack prior to waking kmp up.	328	* switch to this cpu's private stack prior to waking kmp up.
327	*/	329	*/
328	context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),	330	context_set(&CPU->saved_context, FADDR(main_ap_separated_stack),
329	(uintptr_t) CPU->stack, CPU_STACK_SIZE);	331	(uintptr_t) CPU->stack, CPU_STACK_SIZE);
330	context_restore(&CPU->saved_context);	332	context_restore(&CPU->saved_context);
331	/* not reached */	333	/* not reached */
332	}	334	}
333		335
334		336
335	/** Main kernel routine for application CPUs using new stack.	337	/** Main kernel routine for application CPUs using new stack.
336	*	338	*
337	* Second part of main_ap().	339	* Second part of main_ap().
338	*	340	*
339	*/	341	*/
340	void main_ap_separated_stack(void)	342	void main_ap_separated_stack(void)
341	{	343	{
342	/*	344	/*
343	* Configure timeouts for this cpu.	345	* Configure timeouts for this cpu.
344	*/	346	*/
345	timeout_init();	347	timeout_init();
346		348
347	waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);	349	waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
348	scheduler();	350	scheduler();
349	/* not reached */	351	/* not reached */
350	}	352	}
351	#endif /* CONFIG_SMP */	353	#endif /* CONFIG_SMP */
352		354
353	/** @}	355	/** @}
354	*/	356	*/
355		357

Subversion Repositories HelenOS

(root)/branches/sparc/kernel/generic/src/main/main.c @ 3798 – Rev 3097 → 3175