WebSVN – HelenOS – Diff – /branches/arm/kernel/arch/arm32/src/interrupt.c


/*
 * Copyright (c) 2007 Petr Stepan
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/** @addtogroup arm32
 * @{
 */
/** @file
 *  @brief Interrupts controlling routines.
 */
 
#include <arch/asm.h>
#include <arch/regutils.h>
#include <arch/machine.h>
#include <ddi/irq.h>
#include <ddi/device.h>
#include <interrupt.h>
 
/** Initial size of a table holding interrupt handlers. */
#define IRQ_COUNT 8
 
/** Disable interrupts.
 *
 * @return Old interrupt priority level.
 */
ipl_t interrupts_disable(void)
{
    ipl_t ipl = current_status_reg_read();
 
    current_status_reg_control_write(STATUS_REG_IRQ_DISABLED_BIT | ipl);
   
    return ipl;
}
 
/** Enable interrupts.
 *
 * @return Old interrupt priority level.
 */
ipl_t interrupts_enable(void)
{
    ipl_t ipl = current_status_reg_read();
 
 
 
 
 
 
 
    current_status_reg_control_write(ipl & ~STATUS_REG_IRQ_DISABLED_BIT);
   
    return ipl;
}
 
/** Restore interrupt priority level.
 *
 * @param ipl Saved interrupt priority level.
 */
void interrupts_restore(ipl_t ipl)
{
    current_status_reg_control_write(
        (current_status_reg_read() & ~STATUS_REG_IRQ_DISABLED_BIT) |
        (ipl & STATUS_REG_IRQ_DISABLED_BIT));
}
 
/** Read interrupt priority level.
 *
 * @return Current interrupt priority level.
 */
ipl_t interrupts_read(void)
{
    return current_status_reg_read();
}
 
/** Initialize basic tables for exception dispatching
 * and starts the timer.
 */
void interrupt_init(void)
{
    irq_init(IRQ_COUNT, IRQ_COUNT);
    machine_timer_irq_start();
   
}
 
/** @}
 */
 

Subversion Repositories HelenOS

(root)/branches/arm/kernel/arch/arm32/src/interrupt.c – Rev 4652 → 4665

Rev 4652		Rev 4665
1	/*	1	/*
2	* Copyright (c) 2007 Petr Stepan	2	* Copyright (c) 2007 Petr Stepan
3	* All rights reserved.	3	* All rights reserved.
4	*	4	*
5	* Redistribution and use in source and binary forms, with or without	5	* Redistribution and use in source and binary forms, with or without
6	* modification, are permitted provided that the following conditions	6	* modification, are permitted provided that the following conditions
7	* are met:	7	* are met:
8	*	8	*
9	* - Redistributions of source code must retain the above copyright	9	* - Redistributions of source code must retain the above copyright
10	* notice, this list of conditions and the following disclaimer.	10	* notice, this list of conditions and the following disclaimer.
11	* - Redistributions in binary form must reproduce the above copyright	11	* - Redistributions in binary form must reproduce the above copyright
12	* notice, this list of conditions and the following disclaimer in the	12	* notice, this list of conditions and the following disclaimer in the
13	* documentation and/or other materials provided with the distribution.	13	* documentation and/or other materials provided with the distribution.
14	* - The name of the author may not be used to endorse or promote products	14	* - The name of the author may not be used to endorse or promote products
15	* derived from this software without specific prior written permission.	15	* derived from this software without specific prior written permission.
16	*	16	*
17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR	17	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES	18	* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.	19	* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,	20	* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT	21	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,	22	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY	23	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT	24	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF	25	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.	26	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27	*/	27	*/
28		28
29	/** @addtogroup arm32	29	/** @addtogroup arm32
30	* @{	30	* @{
31	*/	31	*/
32	/** @file	32	/** @file
33	* @brief Interrupts controlling routines.	33	* @brief Interrupts controlling routines.
34	*/	34	*/
35		35
36	#include <arch/asm.h>	36	#include <arch/asm.h>
37	#include <arch/regutils.h>	37	#include <arch/regutils.h>
38	#include <arch/machine.h>	38	#include <arch/machine.h>
39	#include <ddi/irq.h>	39	#include <ddi/irq.h>
40	#include <ddi/device.h>	40	#include <ddi/device.h>
41	#include <interrupt.h>	41	#include <interrupt.h>
42		42
43	/** Initial size of a table holding interrupt handlers. */	43	/** Initial size of a table holding interrupt handlers. */
44	#define IRQ_COUNT 8	44	#define IRQ_COUNT 8
45		45
46	/** Disable interrupts.	46	/** Disable interrupts.
47	*	47	*
48	* @return Old interrupt priority level.	48	* @return Old interrupt priority level.
49	*/	49	*/
50	ipl_t interrupts_disable(void)	50	ipl_t interrupts_disable(void)
51	{	51	{
52	ipl_t ipl = current_status_reg_read();	52	ipl_t ipl = current_status_reg_read();
53		53
54	current_status_reg_control_write(STATUS_REG_IRQ_DISABLED_BIT \| ipl);	54	current_status_reg_control_write(STATUS_REG_IRQ_DISABLED_BIT \| ipl);
55		55
56	return ipl;	56	return ipl;
57	}	57	}
58		58
59	/** Enable interrupts.	59	/** Enable interrupts.
60	*	60	*
61	* @return Old interrupt priority level.	61	* @return Old interrupt priority level.
62	*/	62	*/
63	ipl_t interrupts_enable(void)	63	ipl_t interrupts_enable(void)
64	{	64	{
65	ipl_t ipl = current_status_reg_read();	65	ipl_t ipl = current_status_reg_read();
66		66
67	/*	-
68	* Current implementation of interrupt handling is non-nested mode.	-
69	* So we don't enable interrupt if servicing IRQ.	-
70	* ToDo: Re-implement interrupt handling to handle nested interrupts.	-
71	*/	-
72	if ((ipl & 0x1f) != UNDEFINED_MODE)	-
73	current_status_reg_control_write(ipl & ~STATUS_REG_IRQ_DISABLED_BIT);	67	current_status_reg_control_write(ipl & ~STATUS_REG_IRQ_DISABLED_BIT);
74		68
75	return ipl;	69	return ipl;
76	}	70	}
77		71
78	/** Restore interrupt priority level.	72	/** Restore interrupt priority level.
79	*	73	*
80	* @param ipl Saved interrupt priority level.	74	* @param ipl Saved interrupt priority level.
81	*/	75	*/
82	void interrupts_restore(ipl_t ipl)	76	void interrupts_restore(ipl_t ipl)
83	{	77	{
84	current_status_reg_control_write(	78	current_status_reg_control_write(
85	(current_status_reg_read() & ~STATUS_REG_IRQ_DISABLED_BIT) \|	79	(current_status_reg_read() & ~STATUS_REG_IRQ_DISABLED_BIT) \|
86	(ipl & STATUS_REG_IRQ_DISABLED_BIT));	80	(ipl & STATUS_REG_IRQ_DISABLED_BIT));
87	}	81	}
88		82
89	/** Read interrupt priority level.	83	/** Read interrupt priority level.
90	*	84	*
91	* @return Current interrupt priority level.	85	* @return Current interrupt priority level.
92	*/	86	*/
93	ipl_t interrupts_read(void)	87	ipl_t interrupts_read(void)
94	{	88	{
95	return current_status_reg_read();	89	return current_status_reg_read();
96	}	90	}
97		91
98	/** Initialize basic tables for exception dispatching	92	/** Initialize basic tables for exception dispatching
99	* and starts the timer.	93	* and starts the timer.
100	*/	94	*/
101	void interrupt_init(void)	95	void interrupt_init(void)
102	{	96	{
103	irq_init(IRQ_COUNT, IRQ_COUNT);	97	irq_init(IRQ_COUNT, IRQ_COUNT);
104	machine_timer_irq_start();	98	machine_timer_irq_start();
105		99
106	}	100	}
107		101
108	/** @}	102	/** @}
109	*/	103	*/
110		104