/branches/sparc/kernel/arch/sparc64/src/sun4v/start.S |
---|
31,6 → 31,8 |
#include <arch/stack.h> |
#include <arch/sun4v/regdef.h> |
#include <arch/sun4v/hypercall.h> |
#include <arch/sun4v/arch.h> |
#include <arch/sun4v/cpu.h> |
#include <arch/mm/pagesize.h> |
#include <arch/mm/sun4v/tte.h> |
#include <arch/mm/sun4v/mmu.h> |
191,6 → 193,34 |
stx %l6, [%l4 + %lo(physmem_base)] |
/* |
* Set CPUID. |
*/ |
__HYPERCALL_FAST(CPU_MYID) |
mov SCRATCHPAD_CPUID, %g1 |
stxa %o1, [%g1] ASI_SCRATCHPAD |
/* |
* Set MMU fault status area for the current CPU. |
*/ |
set mmu_fsas, %o0 ! o0 <= addr. of fault status areas array |
add %o0, %l6, %o0 ! kernel address to real address |
mulx %o1, MMU_FSA_SIZE, %g1 ! g1 <= offset of current CPU's fault status area |
add %g1, %o0, %o0 ! o0 <= FSA of the current CPU |
mov SCRATCHPAD_MMU_FSA, %g1 |
stxa %o0, [%g1] ASI_SCRATCHPAD ! remember MMU fault status area to speed up miss handler |
__HYPERCALL_FAST(MMU_FAULT_AREA_CONF) |
/* |
* Store a template of a TTE Data entry for kernel mappings. |
* This template will be used from the kernel MMU miss handler. |
*/ |
!TTE_DATA(0, %l5, %g2, %g3, %g1) |
setx TTE_FLAGS | PAGESIZE_8K, %g2, %g1; \ |
add %g1, %l5, %g1; \ |
set kernel_8k_tlb_data_template, %g4 |
stx %g1, [%g4] |
/* |
* So far, we have not touched the stack. |
* It is a good idea to set the kernel stack to a known state now. |
*/ |
233,3 → 263,14 |
.global physmem_base ! copy of the physical memory base address |
physmem_base: |
.quad 0 |
.global kernel_8k_tlb_data_template |
kernel_8k_tlb_data_template: |
.quad 0 |
/* MMU fault status areas for all CPUs */ |
.align MMU_FSA_ALIGNMENT |
.global mmu_fsas |
mmu_fsas: |
!.space (MMU_FSA_SIZE * MAX_NUM_STRANDS) |
.space 8192 |
/branches/sparc/kernel/arch/sparc64/src/trap/mmu.S |
---|
File deleted |
/branches/sparc/kernel/arch/sparc64/src/trap/sun4v/mmu.S |
---|
0,0 → 1,74 |
# |
# Copyright (c) 2006 Jakub Jermar |
# All rights reserved. |
# |
# Redistribution and use in source and binary forms, with or without |
# modification, are permitted provided that the following conditions |
# are met: |
# |
# - Redistributions of source code must retain the above copyright |
# notice, this list of conditions and the following disclaimer. |
# - Redistributions in binary form must reproduce the above copyright |
# notice, this list of conditions and the following disclaimer in the |
# documentation and/or other materials provided with the distribution. |
# - The name of the author may not be used to endorse or promote products |
# derived from this software without specific prior written permission. |
# |
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
# |
/** |
* @file |
* @brief MMU trap handlers that do not fit into the trap table. |
*/ |
.register %g2, #scratch |
.register %g3, #scratch |
.text |
#include <arch/trap/sun4v/mmu.h> |
#include <arch/trap/trap_table.h> |
#include <arch/sun4v/regdef.h> |
/* |
* Install mapping for the kernel. The mapping obeys this formula: |
* virtual address = real address + start of physical memory |
* |
* The routine expects the following values of registers: |
* %g1 virtual address that has caused the miss |
*/ |
.global install_identity_mapping |
install_identity_mapping: |
/* output registers mustn't be clobbered during the hypercall, SAVE is too risky */ |
mov %o0, %g3 |
mov %o1, %g4 |
mov %o2, %g5 |
mov %o3, %g6 |
/* install mapping for kernel */ |
mov %g1, %o0 |
set 0, %o1 ! set context |
setx kernel_8k_tlb_data_template, %g1, %g2 ! g2 <= template of TTE Data |
ldx [%g2], %g2 ! read the TTE Data template |
add %g2, %o0, %o2 ! template + VA = TTE Data entry |
set MMU_FLAG_DTLB, %o3 ! map in DTLB only |
ta MMU_MAP_ADDR |
/* restore output registers */ |
mov %g6, %o3 |
mov %g5, %o2 |
mov %g4, %o1 |
mov %g3, %o0 |
retry |
/branches/sparc/kernel/arch/sparc64/src/trap/sun4v/trap_table.S |
---|
540,7 → 540,7 |
nop ! it will be easy to find |
/* prevent unnecessary CLEANWIN exceptions */ |
wrpr %g0, WSTATE_OTHER(0) | WSTATE_NORMAL(0), %wstate |
wrpr %g0, NWINDOWS - 1, %cleanwin |
1: |
/* |
* Prevent SAVE instruction from causing a spill exception. If the |
/branches/sparc/kernel/arch/sparc64/src/mm/sun4v/tlb.c |
---|
74,38 → 74,13 |
}; |
#endif |
mmu_fault_status_area_t mmu_fault_status_areas[MAX_NUM_STRANDS] |
__attribute__ ((aligned (64))); |
void tlb_arch_init(void) |
{ |
uint64_t errno; |
/* |
* Invalidate all non-locked DTLB and ITLB entries. |
*/ |
void tlb_arch_init(void) |
{ |
tlb_invalidate_all(); |
/* |
* Set the MMU fault status area for the current CPU. |
*/ |
uint64_t myid; |
__hypercall_fast_ret1(0, 0, 0, 0, 0, CPU_MYID, &myid); |
errno = __hypercall_fast1(MMU_FAULT_AREA_CONF, |
KA2PA(&(mmu_fault_status_areas[myid]))); |
if (errno != EOK) { |
panic("Could not set MMU fault area for CPU %d, errno = %d.\n", |
myid, errno); |
} |
printf("Setting MMU fault area for CPU %d at %x.\n", myid, KA2PA(&(mmu_fault_status_areas[myid]))); |
#if 0 |
/* |
* Clear both SFSRs. |
*/ |
dtlb_sfsr_write(0); |
itlb_sfsr_write(0); |
#endif |
} |
/** Insert privileged mapping into DMMU TLB. |
* |