63,57 → 63,60 |
* |
* Temporary exception stack is used to save a few registers |
* before stack switch takes place. |
* |
*/ |
inline static void setup_stack_and_save_regs() |
{ |
asm volatile( |
"ldr r13, =exc_stack \n" |
"stmfd r13!, {r0} \n" |
"mrs r0, spsr \n" |
"and r0, r0, #0x1f \n" |
"cmp r0, #0x10 \n" |
"bne 1f \n" |
|
asm volatile ( |
"ldr r13, =exc_stack\n" |
"stmfd r13!, {r0}\n" |
"mrs r0, spsr\n" |
"and r0, r0, #0x1f\n" |
"cmp r0, #0x10\n" |
"bne 1f\n" |
|
/* prev mode was usermode */ |
"ldmfd r13!, {r0} \n" |
"ldr r13, =supervisor_sp \n" |
"ldr r13, [r13] \n" |
"stmfd r13!, {lr} \n" |
"stmfd r13!, {r0-r12} \n" |
"stmfd r13!, {r13, lr}^ \n" |
"mrs r0, spsr \n" |
"stmfd r13!, {r0} \n" |
"b 2f \n" |
|
"ldmfd r13!, {r0}\n" |
"ldr r13, =supervisor_sp\n" |
"ldr r13, [r13]\n" |
"stmfd r13!, {lr}\n" |
"stmfd r13!, {r0-r12}\n" |
"stmfd r13!, {r13, lr}^\n" |
"mrs r0, spsr\n" |
"stmfd r13!, {r0}\n" |
"b 2f\n" |
|
/* mode was not usermode */ |
"1:\n" |
"stmfd r13!, {r1, r2, r3} \n" |
"mrs r1, cpsr \n" |
"mov r2, lr \n" |
"bic r1, r1, #0x1f \n" |
"orr r1, r1, r0 \n" |
"mrs r0, cpsr \n" |
"msr cpsr_c, r1 \n" |
|
"mov r3, r13 \n" |
"stmfd r13!, {r2} \n" |
"mov r2, lr \n" |
"stmfd r13!, {r4-r12} \n" |
"mov r1, r13 \n" |
/* the following two lines are for debugging */ |
"mov sp, #0 \n" |
"mov lr, #0 \n" |
"msr cpsr_c, r0 \n" |
|
"ldmfd r13!, {r4, r5, r6, r7} \n" |
"stmfd r1!, {r4, r5, r6} \n" |
"stmfd r1!, {r7} \n" |
"stmfd r1!, {r2} \n" |
"stmfd r1!, {r3} \n" |
"mrs r0, spsr \n" |
"stmfd r1!, {r0} \n" |
"mov r13, r1 \n" |
"2:\n" |
"1:\n" |
"stmfd r13!, {r1, r2, r3}\n" |
"mrs r1, cpsr\n" |
"mov r2, lr\n" |
"bic r1, r1, #0x1f\n" |
"orr r1, r1, r0\n" |
"mrs r0, cpsr\n" |
"msr cpsr_c, r1\n" |
|
"mov r3, r13\n" |
"stmfd r13!, {r2}\n" |
"mov r2, lr\n" |
"stmfd r13!, {r4-r12}\n" |
"mov r1, r13\n" |
|
/* the following two lines are for debugging */ |
"mov sp, #0\n" |
"mov lr, #0\n" |
"msr cpsr_c, r0\n" |
|
"ldmfd r13!, {r4, r5, r6, r7}\n" |
"stmfd r1!, {r4, r5, r6}\n" |
"stmfd r1!, {r7}\n" |
"stmfd r1!, {r2}\n" |
"stmfd r1!, {r3}\n" |
"mrs r0, spsr\n" |
"stmfd r1!, {r0}\n" |
"mov r13, r1\n" |
|
"2:\n" |
); |
} |
|
189,10 → 192,13 |
} |
|
/** Calls exception dispatch routine. */ |
#define CALL_EXC_DISPATCH(exception) \ |
asm("mov r0, %0" : : "i" (exception)); \ |
asm("mov r1, r13"); \ |
asm("bl exc_dispatch"); |
#define CALL_EXC_DISPATCH(exception) \ |
asm volatile ( \ |
"mov r0, %[exc]\n" \ |
"mov r1, r13\n" \ |
"bl exc_dispatch\n" \ |
:: [exc] "i" (exception) \ |
);\ |
|
/** General exception handler. |
* |
201,9 → 207,9 |
* |
* @param exception Exception number. |
*/ |
#define PROCESS_EXCEPTION(exception) \ |
setup_stack_and_save_regs(); \ |
CALL_EXC_DISPATCH(exception) \ |
#define PROCESS_EXCEPTION(exception) \ |
setup_stack_and_save_regs(); \ |
CALL_EXC_DISPATCH(exception) \ |
load_regs(); |
|
/** Updates specified exception vector to jump to given handler. |
333,17 → 339,23 |
{ |
uint32_t control_reg; |
|
asm volatile("mrc p15, 0, %0, c1, c1" : "=r" (control_reg)); |
asm volatile ( |
"mrc p15, 0, %[control_reg], c1, c1" |
: [control_reg] "=r" (control_reg) |
); |
|
/* switch on the high vectors bit */ |
control_reg |= CP15_R1_HIGH_VECTORS_BIT; |
|
asm volatile("mcr p15, 0, %0, c1, c1" : : "r" (control_reg)); |
asm volatile ( |
"mcr p15, 0, %[control_reg], c1, c1" |
:: [control_reg] "r" (control_reg) |
); |
} |
#endif |
|
/** Initializes exception handling. |
* |
* |
* Installs low-level exception handlers and then registers |
* exceptions and their handlers to kernel exception dispatcher. |
*/ |