Subversion Repositories HelenOS

/*

 * Copyright (C) 2001-2004 Jakub Jermar

 * All rights reserved.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions

 * are met:

 *

 * - Redistributions of source code must retain the above copyright

 *   notice, this list of conditions and the following disclaimer.

 * - Redistributions in binary form must reproduce the above copyright

 *   notice, this list of conditions and the following disclaimer in the

 *   documentation and/or other materials provided with the distribution.

 * - The name of the author may not be used to endorse or promote products

 *   derived from this software without specific prior written permission.

 *

 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR

 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */

/** @addtogroup genarch

 * @{

 */

/**

 * @file

 * @brief   Zilog 8530 serial port / keyboard driver.

 */

#include <genarch/kbd/z8530.h>

#include <genarch/kbd/key.h>

#include <genarch/kbd/scanc.h>

#include <genarch/kbd/scanc_sun.h>

#include <arch/drivers/z8530.h>

#include <ddi/irq.h>

#include <ipc/irq.h>

#include <arch/interrupt.h>

#include <arch/drivers/kbd.h>

#include <arch/drivers/fhc.h>

#include <cpu.h>

#include <arch/asm.h>

#include <arch.h>

#include <typedefs.h>

#include <console/chardev.h>

#include <console/console.h>

#include <interrupt.h>

#include <sysinfo/sysinfo.h>

#include <print.h>

/*

 * These codes read from z8530 data register are silently ignored.

 */

#define IGNORE_CODE 0x7f        /* all keys up */

static z8530_t z8530;       /**< z8530 device structure. */

static irq_t z8530_irq;     /**< z8530's IRQ. */

static void z8530_suspend(chardev_t *);

static void z8530_resume(chardev_t *);

static chardev_operations_t ops = {

    .suspend = z8530_suspend,

    .resume = z8530_resume,

    .read = z8530_key_read

};

/** Initialize keyboard and service interrupts using kernel routine. */

void z8530_grab(void)

{

    (void) z8530_read_a(&z8530, RR8);

    /*

     * Clear any pending TX interrupts or we never manage

     * to set FHC UART interrupt state to idle.

     */

    z8530_write_a(&z8530, WR0, WR0_TX_IP_RST);

    z8530_write_a(&z8530, WR1, WR1_IARCSC);     /* interrupt on all characters */

    /* 8 bits per character and enable receiver */

    z8530_write_a(&z8530, WR3, WR3_RX8BITSCH | WR3_RX_ENABLE);

    z8530_write_a(&z8530, WR9, WR9_MIE);        /* Master Interrupt Enable. */

    z8530_irq.notif_cfg.notify = false;

}

/** Resume the former IPC notification behavior. */

void z8530_release(void)

{

    if (z8530_irq.notif_cfg.answerbox)

        z8530_irq.notif_cfg.notify = true;

}

/** Initialize z8530. */

void z8530_init(devno_t devno, inr_t inr, uintptr_t vaddr)

{

    chardev_initialize("z8530_kbd", &kbrd, &ops);

    stdin = &kbrd;

    z8530.devno = devno;

    z8530.reg = (uint8_t *) vaddr;

    irq_initialize(&z8530_irq);

    z8530_irq.devno = devno;

    z8530_irq.inr = inr;

    z8530_irq.claim = z8530_claim;

    z8530_irq.handler = z8530_irq_handler;

    irq_register(&z8530_irq);

    sysinfo_set_item_val("kbd", NULL, true);

    sysinfo_set_item_val("kbd.type", NULL, KBD_Z8530);

    sysinfo_set_item_val("kbd.devno", NULL, devno);

    sysinfo_set_item_val("kbd.inr", NULL, inr);

    sysinfo_set_item_val("kbd.address.virtual", NULL, vaddr);

    z8530_grab();

}

/** Process z8530 interrupt.

 *

 * @param n Interrupt vector.

 * @param istate Interrupted state.

 */

void z8530_interrupt(void)

{

    z8530_poll();

}

/* Called from getc(). */

void z8530_resume(chardev_t *d)

{

}

/* Called from getc(). */

void z8530_suspend(chardev_t *d)

{

}

char z8530_key_read(chardev_t *d)

{

    char ch;   

    while(!(ch = active_read_buff_read())) {

        uint8_t x;

        while (!(z8530_read_a(&z8530, RR0) & RR0_RCA))

            ;

        x = z8530_read_a(&z8530, RR8);

        if (x != IGNORE_CODE) {

            if (x & KEY_RELEASE)

                key_released(x ^ KEY_RELEASE);

            else

                active_read_key_pressed(x);

        }

    }

    return ch;

}

/** Poll for key press and release events.

 *

 * This function can be used to implement keyboard polling.

 */

void z8530_poll(void)

{

    uint8_t x;

    while (z8530_read_a(&z8530, RR0) & RR0_RCA) {

        x = z8530_read_a(&z8530, RR8);

        if (x != IGNORE_CODE) {

            if (x & KEY_RELEASE)

                key_released(x ^ KEY_RELEASE);

            else

                key_pressed(x);

        }

    }

}

irq_ownership_t z8530_claim(void)

{

    return (z8530_read_a(&z8530, RR0) & RR0_RCA);

}

void z8530_irq_handler(irq_t *irq, void *arg, ...)

{

    /*

     * So far, we know we got this interrupt through the FHC.

     * Since we don't have enough documentation about the FHC

     * and because the interrupt looks like level sensitive,

     * we cannot handle it by scheduling one of the level

     * interrupt traps. Process the interrupt directly.

     */

    if (irq->notif_cfg.notify && irq->notif_cfg.answerbox)

        ipc_irq_send_notif(irq);

    else

        z8530_interrupt();

    fhc_clear_interrupt(central_fhc, irq->inr);

}

/** @}

 */