Subversion Repositories HelenOS

Rev

Rev 2107 | Rev 2439 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 jermar 1
/*
2071 jermar 2
 * Copyright (c) 2001-2004 Jakub Jermar
1 jermar 3
 * All rights reserved.
4
 *
5
 * Redistribution and use in source and binary forms, with or without
6
 * modification, are permitted provided that the following conditions
7
 * are met:
8
 *
9
 * - Redistributions of source code must retain the above copyright
10
 *   notice, this list of conditions and the following disclaimer.
11
 * - Redistributions in binary form must reproduce the above copyright
12
 *   notice, this list of conditions and the following disclaimer in the
13
 *   documentation and/or other materials provided with the distribution.
14
 * - The name of the author may not be used to endorse or promote products
15
 *   derived from this software without specific prior written permission.
16
 *
17
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
 */
28
 
1754 jermar 29
/** @addtogroup ia32   
1702 cejka 30
 * @{
31
 */
1754 jermar 32
/**
33
 * @file
34
 * @brief   i8254 chip driver.
35
 *
36
 * Low level time functions.
1702 cejka 37
 */
38
 
1 jermar 39
#include <arch/types.h>
40
#include <time/clock.h>
41
#include <time/delay.h>
2018 decky 42
#include <arch/cycle.h>
1 jermar 43
#include <arch/interrupt.h>
1477 decky 44
#include <arch/drivers/i8259.h>
45
#include <arch/drivers/i8254.h>
1 jermar 46
#include <cpu.h>
47
#include <config.h>
48
#include <arch/pm.h>
49
#include <arch/asm.h>
195 vana 50
#include <arch/cpuid.h>
1 jermar 51
#include <arch.h>
195 vana 52
#include <time/delay.h>
1956 decky 53
#include <ddi/irq.h>
54
#include <ddi/device.h>
1 jermar 55
 
56
#define CLK_PORT1   0x40
57
#define CLK_PORT4   0x43
58
 
59
#define CLK_CONST   1193180
60
#define MAGIC_NUMBER    1194
61
 
1956 decky 62
static irq_t i8254_irq;
576 palkovsky 63
 
1956 decky 64
static irq_ownership_t i8254_claim(void)
65
{
66
    return IRQ_ACCEPT;
67
}
68
 
69
static void i8254_irq_handler(irq_t *irq, void *arg, ...)
70
{
2107 jermar 71
    /*
72
     * This IRQ is responsible for kernel preemption.
73
     * Nevertheless, we are now holding a spinlock which prevents
74
     * preemption. For this particular IRQ, we don't need the
75
     * lock. We just release it, call clock() and then reacquire it again.
76
     */
77
    spinlock_unlock(&irq->lock);
1956 decky 78
    clock();
2107 jermar 79
    spinlock_lock(&irq->lock);
1956 decky 80
}
81
 
1 jermar 82
void i8254_init(void)
83
{
1956 decky 84
    irq_initialize(&i8254_irq);
2218 decky 85
    i8254_irq.preack = true;
1956 decky 86
    i8254_irq.devno = device_assign_devno();
87
    i8254_irq.inr = IRQ_CLK;
88
    i8254_irq.claim = i8254_claim;
89
    i8254_irq.handler = i8254_irq_handler;
90
    irq_register(&i8254_irq);
91
 
1 jermar 92
    i8254_normal_operation();
93
}
94
 
95
void i8254_normal_operation(void)
96
{
97
    outb(CLK_PORT4, 0x36);
1956 decky 98
    pic_disable_irqs(1 << IRQ_CLK);
99
    outb(CLK_PORT1, (CLK_CONST / HZ) & 0xf);
100
    outb(CLK_PORT1, (CLK_CONST / HZ) >> 8);
101
    pic_enable_irqs(1 << IRQ_CLK);
1 jermar 102
}
103
 
104
#define LOOPS 150000
105
#define SHIFT 11
106
void i8254_calibrate_delay_loop(void)
107
{
1780 jermar 108
    uint64_t clk1, clk2;
109
    uint32_t t1, t2, o1, o2;
110
    uint8_t not_ok;
1 jermar 111
 
112
 
113
    /*
114
     * One-shot timer. Count-down from 0xffff at 1193180Hz
115
     * MAGIC_NUMBER is the magic value for 1ms.
116
     */
117
    outb(CLK_PORT4, 0x30);
118
    outb(CLK_PORT1, 0xff);
119
    outb(CLK_PORT1, 0xff);
120
 
121
    do {
125 jermar 122
        /* will read both status and count */
1 jermar 123
        outb(CLK_PORT4, 0xc2);
124
        not_ok = (inb(CLK_PORT1)>>6)&1;
125
        t1 = inb(CLK_PORT1);
126
        t1 |= inb(CLK_PORT1) << 8;
127
    } while (not_ok);
128
 
129
    asm_delay_loop(LOOPS);
130
 
131
    outb(CLK_PORT4, 0xd2);
132
    t2 = inb(CLK_PORT1);
133
    t2 |= inb(CLK_PORT1) << 8;
134
 
135
    /*
136
     * We want to determine the overhead of the calibrating mechanism.
137
     */
138
    outb(CLK_PORT4, 0xd2);
139
    o1 = inb(CLK_PORT1);
140
    o1 |= inb(CLK_PORT1) << 8;
141
 
142
    asm_fake_loop(LOOPS);
143
 
144
    outb(CLK_PORT4, 0xd2);
145
    o2 = inb(CLK_PORT1);
146
    o2 |= inb(CLK_PORT1) << 8;
147
 
2107 jermar 148
    CPU->delay_loop_const =
149
        ((MAGIC_NUMBER * LOOPS) / 1000) / ((t1 - t2) - (o1 - o2)) +
150
        (((MAGIC_NUMBER * LOOPS) / 1000) % ((t1 - t2) - (o1 - o2)) ? 1 : 0);
1 jermar 151
 
2018 decky 152
    clk1 = get_cycle();
153
    delay(1 << SHIFT);
154
    clk2 = get_cycle();
1 jermar 155
 
2018 decky 156
    CPU->frequency_mhz = (clk2 - clk1) >> SHIFT;
1 jermar 157
 
158
    return;
159
}
160
 
1754 jermar 161
/** @}
1702 cejka 162
 */