Subversion Repositories HelenOS

/*

 * Copyright (c) 2007 Petr Stepan

 * All rights reserved.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions

 * are met:

 *

 * - Redistributions of source code must retain the above copyright

 *   notice, this list of conditions and the following disclaimer.

 * - Redistributions in binary form must reproduce the above copyright

 *   notice, this list of conditions and the following disclaimer in the

 *   documentation and/or other materials provided with the distribution.

 * - The name of the author may not be used to endorse or promote products

 *   derived from this software without specific prior written permission.

 *

 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR

 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */

/** @addtogroup arm32

 * @{

 */

/** @file

 *  @brief Exception handlers and exception initialization routines.

 */

#include <arch/exception.h>

#include <arch/debug/print.h>

#include <arch/memstr.h>

#include <arch/regutils.h>

#include <interrupt.h>

#include <arch/machine.h>

#include <arch/mm/page_fault.h>

#include <print.h>

#include <syscall/syscall.h>

/** Offset used in calculation of exception handler's relative address.

 *

 * @see install_handler()

 */

#define PREFETCH_OFFSET      0x8

/** LDR instruction's code */

#define LDR_OPCODE           0xe59ff000

/** Number of exception vectors. */

#define EXC_VECTORS          8

/** Size of memory block occupied by exception vectors. */

#define EXC_VECTORS_SIZE     (EXC_VECTORS * 4)

/** Switches to kernel stack and saves all registers there.

 *

 * Temporary exception stack is used to save a few registers

 * before stack switch takes place.

 */

inline static void setup_stack_and_save_regs()

{

asm volatile("ldr r13, =exc_stack       \n\

    stmfd r13!, {r0}            \n\

    mrs r0, spsr                \n\

    and r0, r0, #0x1f           \n\

    cmp r0, #0x10               \n\

    bne 1f                  \n\

                        \n\

    @prev mode was usermode         \n\

    ldmfd r13!, {r0}            \n\

    ldr r13, =supervisor_sp         \n\

    ldr r13, [r13]              \n\

    stmfd r13!, {lr}            \n\

    stmfd r13!, {r0-r12}            \n\

    stmfd r13!, {r13, lr}^          \n\

    mrs r0, spsr                \n\

    stmfd r13!, {r0}            \n\

    b 2f                    \n\

                        \n\

    @prev mode was not usermode     \n\

1:                      \n\

    stmfd r13!, {r1, r2, r3}        \n\

    mrs r1, cpsr                \n\

    mov r2, lr              \n\

    bic r1, r1, #0x1f           \n\

    orr r1, r1, r0              \n\

    mrs r0, cpsr                \n\

    msr cpsr_c, r1              \n\

                        \n\

    mov r3, r13             \n\

    stmfd r13!, {r2}            \n\

    mov r2, lr              \n\

    stmfd r13!, {r4-r12}            \n\

    mov r1, r13             \n\

    @following two lines are for debugging  \n\

    mov sp, #0              \n\

    mov lr, #0              \n\

    msr cpsr_c, r0              \n\

                        \n\

    ldmfd r13!, {r4, r5, r6, r7}        \n\

    stmfd r1!, {r4, r5, r6}         \n\

    stmfd r1!, {r7}             \n\

    stmfd r1!, {r2}             \n\

    stmfd r1!, {r3}             \n\

    mrs r0, spsr                \n\

    stmfd r1!, {r0}             \n\

    mov r13, r1             \n\

2:"

);

}

/** Returns from exception mode.

 *

 * Previously saved state of registers (including control register)

 * is restored from the stack.

 */

inline static void load_regs()

{

asm volatile(   "ldmfd r13!, {r0}       \n\

    msr spsr, r0                \n\

    and r0, r0, #0x1f           \n\

    cmp r0, #0x10               \n\

    bne 3f                  \n\

                        \n\

    @return to user mode            \n\

    ldmfd r13!, {r13, lr}^          \n\

    b 4f                    \n\

                        \n\

    @return to non-user mode        \n\

3:                      \n\

    ldmfd r13!, {r1, r2}            \n\

    mrs r3, cpsr                \n\

    bic r3, r3, #0x1f           \n\

    orr r3, r3, r0              \n\

    mrs r0, cpsr                \n\

    msr cpsr_c, r3              \n\

                        \n\

    mov r13, r1             \n\

    mov lr, r2              \n\

    msr cpsr_c, r0              \n\

                        \n\

    @actual return              \n\

4:  ldmfd r13, {r0-r12, pc}^"

);

}

/** Switch CPU to mode in which interrupts are serviced (currently it

 * is Undefined mode).

 *

 * The default mode for interrupt servicing (Interrupt Mode)

 * can not be used because of nested interrupts (which can occur

 * because interrupt are enabled in higher levels of interrupt handler).

 */

inline static void switchToIrqServicingMode()

{

    /* switch to Undefined mode */

    asm volatile(

        /* save regs used during switching */

        "stmfd sp!, {r0-r3}     \n"

        /* save stack pointer and link register to r1, r2 */

        "mov r1, sp         \n"

        "mov r2, lr         \n"

        /* mode switch */

        "mrs r0, cpsr           \n"

        "bic r0, r0, #0x1f      \n"

        "orr r0, r0, #0x1b      \n"

        "msr cpsr_c, r0         \n"

        /* restore saved sp and lr */

        "mov sp, r1         \n"

        "mov lr, r2         \n"

        /* restore original regs */

        "ldmfd sp!, {r0-r3}     \n"

    );

}

/** Calls exception dispatch routine. */

#define CALL_EXC_DISPATCH(exception)        \

    asm("mov r0, %0" : : "i" (exception));  \

    asm("mov r1, r13");         \

    asm("bl exc_dispatch");     

/** General exception handler.

 *

 *  Stores registers, dispatches the exception,

 *  and finally restores registers and returns from exception processing.

 *

 *  @param exception Exception number.

 */

#define PROCESS_EXCEPTION(exception)        \

    setup_stack_and_save_regs();        \

    CALL_EXC_DISPATCH(exception)        \

    load_regs();

/** Updates specified exception vector to jump to given handler.

 *

 *  Addresses of handlers are stored in memory following exception vectors.

 */

static void install_handler (unsigned handler_addr, unsigned* vector)

{

    /* relative address (related to exc. vector) of the word

     * where handler's address is stored

    */

    volatile uint32_t handler_address_ptr = EXC_VECTORS_SIZE - PREFETCH_OFFSET;

    /* make it LDR instruction and store at exception vector */

    *vector = handler_address_ptr | LDR_OPCODE;

    /* store handler's address */

    *(vector + EXC_VECTORS) = handler_addr;

}

/** Low-level Reset Exception handler. */

static void reset_exception_entry()

{

    PROCESS_EXCEPTION(EXC_RESET);

}

/** Low-level Software Interrupt Exception handler. */

static void swi_exception_entry()

{

    PROCESS_EXCEPTION(EXC_SWI);

}

/** Low-level Undefined Instruction Exception handler. */

static void undef_instr_exception_entry()

{

    PROCESS_EXCEPTION(EXC_UNDEF_INSTR);

}

/** Low-level Fast Interrupt Exception handler. */

static void fiq_exception_entry()

{

    PROCESS_EXCEPTION(EXC_FIQ);

}

/** Low-level Prefetch Abort Exception handler. */

static void prefetch_abort_exception_entry()

{

    asm("sub lr, lr, #4");

    PROCESS_EXCEPTION(EXC_PREFETCH_ABORT);

}

/** Low-level Data Abort Exception handler. */

static void data_abort_exception_entry()

{

    asm("sub lr, lr, #8");

    PROCESS_EXCEPTION(EXC_DATA_ABORT);

}

/** Low-level Interrupt Exception handler.

 *

 * CPU is switched to Undefined mode before further interrupt processing

 * because of possible occurence of nested interrupt exception, which

 * would overwrite (and thus spoil) stack pointer.

 */

static void irq_exception_entry()

{

    asm("sub lr, lr, #4");

    setup_stack_and_save_regs();

    switchToIrqServicingMode();

    CALL_EXC_DISPATCH(EXC_IRQ)

    load_regs();

}

/** Software Interrupt handler.

 *

 * Dispatches the syscall.

 */

static void swi_exception(int exc_no, istate_t *istate)

{

    /*

    dprintf("SYSCALL: r0-r4: %x, %x, %x, %x, %x; pc: %x\n", istate->r0,

        istate->r1, istate->r2, istate->r3, istate->r4, istate->pc);

    */

    istate->r0 = syscall_handler(

        istate->r0,

        istate->r1,

        istate->r2,

        istate->r3,

        istate->r4);

}

/** Interrupt Exception handler.

 *

 * Determines the sources of interrupt, and calls their handlers.

 */

static void irq_exception(int exc_no, istate_t *istate)

{

    machine_irq_exception(exc_no, istate);

}

/** Fills exception vectors with appropriate exception handlers. */

void install_exception_handlers(void)

{

    install_handler((unsigned)reset_exception_entry,

             (unsigned*)EXC_RESET_VEC);

    install_handler((unsigned)undef_instr_exception_entry,

             (unsigned*)EXC_UNDEF_INSTR_VEC);

    install_handler((unsigned)swi_exception_entry,

             (unsigned*)EXC_SWI_VEC);

    install_handler((unsigned)prefetch_abort_exception_entry,

             (unsigned*)EXC_PREFETCH_ABORT_VEC);

    install_handler((unsigned)data_abort_exception_entry,

             (unsigned*)EXC_DATA_ABORT_VEC);

    install_handler((unsigned)irq_exception_entry,

             (unsigned*)EXC_IRQ_VEC);

    install_handler((unsigned)fiq_exception_entry,

             (unsigned*)EXC_FIQ_VEC);

}

#ifdef HIGH_EXCEPTION_VECTORS

/** Activates use of high exception vectors addresses. */

static void high_vectors()

{

    uint32_t control_reg;

    asm volatile( "mrc p15, 0, %0, c1, c1": "=r" (control_reg));

    //switch on the high vectors bit

    control_reg |= CP15_R1_HIGH_VECTORS_BIT;

    asm volatile( "mcr p15, 0, %0, c1, c1" : : "r" (control_reg));

}

#endif

/** Initializes exception handling.

 *

 * Installs low-level exception handlers and then registers

 * exceptions and their handlers to kernel exception dispatcher.

 */

void exception_init(void)

{

#ifdef HIGH_EXCEPTION_VECTORS

    high_vectors();

#endif

    install_exception_handlers();

    exc_register(EXC_IRQ, "interrupt", (iroutine) irq_exception);

    exc_register(EXC_PREFETCH_ABORT, "prefetch abort", (iroutine) prefetch_abort);

    exc_register(EXC_DATA_ABORT, "data abort", (iroutine) data_abort);

    exc_register(EXC_SWI, "software interrupt", (iroutine) swi_exception);

}

/** Prints #istate_t structure content.

 *

 * @param istate Structure to be printed.

 */

void print_istate(istate_t *istate)

{

    dprintf("istate dump:\n");

    dprintf(" r0: %x    r1: %x    r2: %x    r3: %x\n",

        istate->r0, istate->r1, istate->r2, istate->r3);

    dprintf(" r4: %x    r5: %x    r6: %x    r7: %x\n",

        istate->r4, istate->r5, istate->r6, istate->r7);

    dprintf(" r8: %x    r8: %x   r10: %x   r11: %x\n",

        istate->r8, istate->r9, istate->r10, istate->r11);

    dprintf(" r12: %x    sp: %x    lr: %x  spsr: %x\n",

        istate->r12, istate->sp, istate->lr, istate->spsr);

    dprintf(" pc: %x\n", istate->pc);

}

/** @}

 */