Subversion Repositories HelenOS

Rev

Rev 1794 | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
215 jermar 1
# You may now use double quotes around pathnames, in case
2
# your pathname includes spaces.
3
 
4
#=======================================================================
5
# CONFIG_INTERFACE
6
#
7
# The configuration interface is a series of menus or dialog boxes that
8
# allows you to change all the settings that control Bochs's behavior.
9
# There are two choices of configuration interface: a text mode version
10
# called "textconfig" and a graphical version called "wx".  The text
11
# mode version uses stdin/stdout and is always compiled in.  The graphical
12
# version is only available when you use "--with-wx" on the configure 
13
# command.  If you do not write a config_interface line, Bochs will 
14
# choose a default for you.
15
#
16
# NOTE: if you use the "wx" configuration interface, you must also use
17
# the "wx" display library.
18
#=======================================================================
19
config_interface: textconfig
20
#config_interface: wx
21
 
22
#=======================================================================
23
# DISPLAY_LIBRARY
24
#
25
# The display library is the code that displays the Bochs VGA screen.  Bochs 
26
# has a selection of about 10 different display library implementations for 
27
# different platforms.  If you run configure with multiple --with-* options, 
28
# the display_library command lets you choose which one you want to run with.
29
# If you do not write a display_library line, Bochs will choose a default for
30
# you.
31
#
32
# The choices are: 
33
#   x              use X windows interface, cross platform
34
#   win32          use native win32 libraries
35
#   carbon         use Carbon library (for MacOS X)
36
#   beos           use native BeOS libraries
37
#   macintosh      use MacOS pre-10
38
#   amigaos        use native AmigaOS libraries
39
#   sdl            use SDL library, cross platform
40
#   svga           use SVGALIB library for Linux, allows graphics without X11
41
#   term           text only, uses curses/ncurses library, cross platform
42
#   rfb            provides an interface to AT&T's VNC viewer, cross platform
43
#   wx             use wxWindows library, cross platform
44
#   nogui          no display at all
45
#
46
# NOTE: if you use the "wx" configuration interface, you must also use
47
# the "wx" display library.
48
#=======================================================================
49
#display_library: amigaos
50
#display_library: beos
51
#display_library: carbon
52
#display_library: macintosh
53
#display_library: nogui
54
#display_library: rfb
55
#display_library: sdl
56
#display_library: term
57
#display_library: win32
58
#display_library: wx
59
display_library: x 
60
 
812 jermar 61
cpu: count=8, ips=10000000
62
 
215 jermar 63
#=======================================================================
64
# ROMIMAGE:
65
# You now need to load a ROM BIOS into F0000-FFFFF. Normally, you can
66
# use a precompiled BIOS in the bios/ directory of the source tree,
67
# named BIOS-bochs-latest.
68
# You can also use the environment variable $BXSHARE to specify the
69
# location of the BIOS.
70
#=======================================================================
812 jermar 71
romimage: file=$BXSHARE/BIOS-bochs-latest, address=0xf0000
72
#romimage: file=$BXSHARE/BIOS-bochs-8-processors, address=0xf0000
73
#romimage: file=bios/P4SMT, address=0xf0000
215 jermar 74
 
75
#=======================================================================
76
# MEGS
77
# set this to the default number of Megabytes of memory you want
78
# to emulate.  You may also pass the '-megs xyz' option to bochs
79
#
80
# The default is 32MB, most OS's won't need more than that. 
81
#=======================================================================
82
#megs: 256
83
#megs: 128
84
#megs: 64
85
megs: 32
86
#megs: 16
87
#megs: 8
88
 
89
#=======================================================================
90
# OPTROMIMAGE[1-4]:
91
# You may now load up to 4 optional ROM images. Be sure to use a 
92
# read-only area, typically between C8000 and EFFFF. These optional
93
# ROM images should not overwrite the rombios (located at
94
# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
95
# Those ROM images will be initialized by the bios if they contain 
96
# the right signature (0x55AA).
97
# It can also be a convenient way to upload some arbitary code/data
98
# in the simulation, that can be retrieved by the boot loader
99
#=======================================================================
100
#optromimage1: file=optionalrom.bin, address=0xd0000
101
#optromimage2: file=optionalrom.bin, address=0xd1000
102
#optromimage3: file=optionalrom.bin, address=0xd2000
103
#optromimage4: file=optionalrom.bin, address=0xd3000
104
 
105
#=======================================================================
106
# VGAROMIMAGE
107
# You now need to load a VGA ROM BIOS into C0000.
108
#=======================================================================
109
vgaromimage: $BXSHARE/VGABIOS-lgpl-latest
110
#vgaromimage: bios/VGABIOS-elpin-2.40
111
#vgaromimage: $BXSHARE/VGABIOS-elpin-2.40
112
 
113
#=======================================================================
114
# FLOPPYA:
115
# Point this to pathname of floppy image file or device
116
# This should be of a bootable floppy(image/device) if you're 
117
# booting from 'a'.
118
#
119
# You can set the initial status of the media to 'ejected' or 'inserted'.
120
#   floppya: 2_88=path, status=ejected             (2.88M 3.5" floppy)
121
#   floppya: 1_44=path, status=inserted            (1.44M 3.5" floppy)
122
#   floppya: 1_2=path, status=ejected              (1.2M  5.25" floppy)
123
#   floppya: 720k=path, status=inserted            (720K  3.5" floppy)
124
#   floppya: 360k=path, status=inserted            (360K  5.25" floppy)
125
#   floppya: 320k=path, status=inserted            (320K  5.25" floppy)
126
#   floppya: 180k=path, status=inserted            (180K  5.25" floppy)
127
#   floppya: 160k=path, status=inserted            (160K  5.25" floppy)
128
#
129
# The path should be the name of a disk image file.  On unix, you can use
130
# a raw device name such as /dev/fd0 on Linux.  On WinNT and Win2k, use
131
# drive letters such as a: or b: as the path.  Raw floppy access is not
132
# supported on Windows 95 and 98.
133
#=======================================================================
1471 decky 134
#floppya: 1_44=image.boot, status=inserted
215 jermar 135
#floppya: 1_44=/dev/fd0, status=inserted
136
 
137
#=======================================================================
138
# FLOPPYB:
139
# See FLOPPYA above for syntax
140
#=======================================================================
141
#floppyb: 1_44=b:, status=inserted
142
#floppyb: 1_44=b.img, status=inserted
143
 
144
#=======================================================================
145
# ATA0, ATA1, ATA2, ATA3
146
# ATA controller for hard disks and cdroms
147
#
148
# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
149
# 
150
# These options enables up to 4 ata channels. For each channel
151
# the two base io addresses and the irq must be specified.
152
# 
153
# ata0 is enabled by default, with ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
154
#
155
# Examples:
156
#   ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
157
#   ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
158
#   ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
159
#   ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
160
#=======================================================================
161
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
162
ata1: enabled=0, ioaddr1=0x170, ioaddr2=0x370, irq=15
163
ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
164
ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
165
 
166
#=======================================================================
167
# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
168
#
169
# This defines the type and characteristics of all attached ata devices:
170
#   type=       type of attached device [disk|cdrom] 
171
#   mode=       only valid for disks [flat|concat|external|dll|sparse|vmware3]
172
#   mode=       only valid for disks [undoable|growing|volatile]
173
#   path=       path of the image
174
#   cylinders=  only valid for disks
175
#   heads=      only valid for disks
176
#   spt=        only valid for disks
177
#   status=     only valid for cdroms [inserted|ejected]
178
#   biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
179
#   translation=type of transation of the bios, only for disks [none|lba|large|rechs|auto]
180
#   model=      string returned by identify device command
181
#   journal=    optional filename of the redolog for undoable and volatile disks
182
#   
183
# Point this at a hard disk image file, cdrom iso file, or physical cdrom
184
# device.  To create a hard disk image, try running bximage.  It will help you
185
# choose the size and then suggest a line that works with it.
186
#
187
# In UNIX it may be possible to use a raw device as a Bochs hard disk, 
188
# but WE DON'T RECOMMEND IT.  In Windows there is no easy way.
189
#
190
# In windows, the drive letter + colon notation should be used for cdroms.
191
# Depending on versions of windows and drivers, you may only be able to 
192
# access the "first" cdrom in the system.  On MacOSX, use path="drive"
193
# to access the physical drive.
194
#
195
# The path, cylinders, heads, and spt are mandatory for type=disk
196
# The path is mandatory for type=cdrom
197
#
198
# Default values are:
199
#   mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
200
#
201
# The biosdetect option has currently no effect on the bios
202
#
203
# Examples:
204
#   ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
205
#   ata0-slave:  type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
206
#   ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
207
#   ata1-slave:  type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
208
#   ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
209
#   ata2-slave:  type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
210
#   ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
211
#   ata3-slave:  type=cdrom, path=iso.sample, status=inserted
212
#=======================================================================
1471 decky 213
ata0-master: type=cdrom, path="image.iso", status=inserted
215 jermar 214
#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
215
#ata0-slave: type=cdrom, path=D:, status=inserted
216
#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
217
#ata0-slave: type=cdrom, path="drive", status=inserted
218
#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted 
219
 
220
#=======================================================================
221
# BOOT:
222
# This defines your boot drive.  
223
# You can either boot from 'floppy', 'disk' or 'cdrom'
224
# legacy 'a' and 'c' are also supported
225
# Examples:
226
#   boot: floppy
227
#   boot: disk
228
#   boot: cdrom
229
#   boot: c
230
#   boot: a
231
#=======================================================================
1471 decky 232
boot: cdrom
215 jermar 233
#boot: disk
234
 
235
#=======================================================================
236
# IPS:
237
# Emulated Instructions Per Second.  This is the number of IPS that bochs
238
# is capable of running on your machine.  Read the note in config.h
239
# on how to find this.  Make sure to recompile after.
240
#
241
# IPS is used to calibrate many time-dependent events within the bochs 
242
# simulation.  For example, changing IPS affects the frequency of VGA
243
# updates, the duration of time before a key starts to autorepeat, and 
244
# the measurement of BogoMips and other benchmarks.
245
#
246
# Examples:
247
# Machine                                         Mips
248
# ________________________________________________________________
249
# 650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66 2 to 2.5 Mips
250
# 400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3  1 to 1.8 Mips
251
# 166Mhz 64bit Sparc with Solaris 2.x             approx 0.75 Mips
252
# 200Mhz Pentium with Linux 2.x                   approx 0.5 Mips
253
#
254
#=======================================================================
255
ips: 2500000
256
 
257
#=======================================================================
258
# CLOCK:
259
# This defines the parameters of the clock inside Bochs:
260
#
261
#  SYNC:
262
#  TO BE COMPLETED (see Greg explaination in bug #536329)
263
#
264
#  TIME0:
265
#  Specifies the start (boot) time of the virtual machine. Use a time 
266
#  value as returned by the time(2) system call. If no time0 value is 
267
#  set or if time0 equal to 1 (special case) or if time0 equal 'local', 
268
#  the simulation will be started at the current local host time.
269
#  If time0 equal to 2 (special case) or if time0 equal 'utc',
270
#  the simulation will be started at the current utc time.
271
#
272
# Syntax:
273
#  clock: sync=[none|slowdown|realtime], time0=[timeValue|local|utc]
274
#
275
# Example:
276
#   clock: sync=none,     time0=local       # Now (localtime)
277
#   clock: sync=slowdown, time0=315529200   # Tue Jan  1 00:00:00 1980
278
#   clock: sync=none,     time0=631148400   # Mon Jan  1 00:00:00 1990
279
#   clock: sync=realtime, time0=938581955   # Wed Sep 29 07:12:35 1999
280
#   clock: sync=realtime, time0=946681200   # Sat Jan  1 00:00:00 2000
281
#   clock: sync=none,     time0=1           # Now (localtime)
282
#   clock: sync=none,     time0=utc         # Now (utc/gmt)
283
# 
284
# Default value are sync=none, time0=local
285
#=======================================================================
286
clock: sync=none, time0=local
287
 
288
 
289
#=======================================================================
290
# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
291
# Enables or disables the 0xaa55 signature check on boot floppies
292
# Defaults to disabled=0
293
# Examples:
294
#   floppy_bootsig_check: disabled=0
295
#   floppy_bootsig_check: disabled=1
296
#=======================================================================
297
#floppy_bootsig_check: disabled=1
298
floppy_bootsig_check: disabled=1
299
 
300
#=======================================================================
301
# LOG:
302
# Give the path of the log file you'd like Bochs debug and misc. verbage
303
# to be written to.  If you really don't want it, make it /dev/null. :^(
304
#
305
# Examples:
306
#   log: ./bochs.out
307
#   log: /dev/tty
308
#=======================================================================
309
#log: /dev/null
310
log: bochsout.txt
311
 
312
#=======================================================================
313
# LOGPREFIX:
314
# This handles the format of the string prepended to each log line.
315
# You may use those special tokens :
316
#   %t : 11 decimal digits timer tick
317
#   %i : 8 hexadecimal digits of cpu0 current eip
318
#   %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
319
#   %d : 5 characters string of the device, between brackets
320
# 
321
# Default : %t%e%d
322
# Examples:
323
#   logprefix: %t-%e-@%i-%d
324
#   logprefix: %i%e%d
325
#=======================================================================
326
#logprefix: %t%e%d
327
 
328
#=======================================================================
329
# LOG CONTROLS
330
#
331
# Bochs now has four severity levels for event logging.
332
#   panic: cannot proceed.  If you choose to continue after a panic, 
333
#          don't be surprised if you get strange behavior or crashes.
334
#   error: something went wrong, but it is probably safe to continue the
335
#          simulation.
336
#   info: interesting or useful messages.
337
#   debug: messages useful only when debugging the code.  This may
338
#          spit out thousands per second.
339
#
340
# For events of each level, you can choose to crash, report, or ignore.
341
# TODO: allow choice based on the facility: e.g. crash on panics from
342
#       everything except the cdrom, and only report those.
343
#
344
# If you are experiencing many panics, it can be helpful to change
345
# the panic action to report instead of fatal.  However, be aware
346
# that anything executed after a panic is uncharted territory and can 
347
# cause bochs to become unstable.  The panic is a "graceful exit," so
348
# if you disable it you may get a spectacular disaster instead.
349
#=======================================================================
812 jermar 350
panic: action=report
215 jermar 351
error: action=report
352
info: action=report
353
debug: action=ignore
354
#pass: action=fatal
355
 
356
#=======================================================================
357
# DEBUGGER_LOG:
358
# Give the path of the log file you'd like Bochs to log debugger output.
359
# If you really don't want it, make it /dev/null or '-'. :^(
360
#
361
# Examples:
362
#   debugger_log: ./debugger.out
363
#=======================================================================
364
#debugger_log: /dev/null
365
#debugger_log: debugger.out
366
debugger_log: -
367
 
368
#=======================================================================
369
# COM1:
370
# This defines a serial port (UART type 16550A). You can specify a device
371
# to use as com1. This can be a real serial line, or a pty.  To use a pty
372
# (under X/Unix), create two windows (xterms, usually).  One of them will
373
# run bochs, and the other will act as com1. Find out the tty the com1
374
# window using the `tty' command, and use that as the `dev' parameter.
375
# Then do `sleep 1000000' in the com1 window to keep the shell from
376
# messing with things, and run bochs in the other window.  Serial I/O to
377
# com1 (port 0x3f8) will all go to the other window.
378
#=======================================================================
379
#com1: enabled=1, dev=/dev/ttyp9
380
 
381
 
382
#=======================================================================
383
# PARPORT1:
384
# This defines a parallel (printer) port. When turned on and an output file is
385
# defined the emulated printer port sends characters printed by the guest OS
386
# into the output file. On some platforms a device filename can be used to
387
# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
388
# win32 platforms).
389
#
390
# Examples:
391
#   parport1: enabled=1, file="parport.out"
392
#   parport1: enabled=1, file="/dev/lp0"
393
#   parport1: enabled=0
394
#=======================================================================
395
parport1: enabled=1, file="parport.out"
396
 
397
#=======================================================================
398
# SB16:
399
# This defines the SB16 sound emulation. It can have several of the
400
# following properties.
401
# All properties are in the format sb16: property=value
402
# midi: The filename is where the midi data is sent. This can be a
403
#       device or just a file if you want to record the midi data.
404
# midimode:
405
#      0=no data
406
#      1=output to device (system dependent. midi denotes the device driver)
407
#      2=SMF file output, including headers
408
#      3=output the midi data stream to the file (no midi headers and no
409
#        delta times, just command and data bytes)
410
# wave: This is the device/file where wave output is stored
411
# wavemode:
412
#      0=no data
413
#      1=output to device (system dependent. wave denotes the device driver)
414
#      2=VOC file output, incl. headers
415
#      3=output the raw wave stream to the file
416
# log:  The file to write the sb16 emulator messages to.
417
# loglevel:
418
#      0=no log
419
#      1=only midi program and bank changes
420
#      2=severe errors
421
#      3=all errors
422
#      4=all errors plus all port accesses
423
#      5=all errors and port accesses plus a lot of extra info
424
# dmatimer:
425
#      microseconds per second for a DMA cycle.  Make it smaller to fix
426
#      non-continous sound.  750000 is usually a good value.  This needs a
427
#      reasonably correct setting for IPS.
428
#
429
# For an example look at the next line:
430
#=======================================================================
431
 
432
#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
433
 
434
#=======================================================================
435
# VGA_UPDATE_INTERVAL:
436
# Video memory is scanned for updates and screen updated every so many
437
# virtual seconds.  The default is 300000, about 3Hz.  This is generally
438
# plenty.  Keep in mind that you must tweak the 'ips:' directive
439
# to be as close to the number of emulated instructions-per-second
440
# your workstation can do, for this to be accurate.
441
#
442
# Examples:
443
#   vga_update_interval: 250000
444
#=======================================================================
445
vga_update_interval: 300000
446
 
447
# using for Winstone '98 tests
448
#vga_update_interval:  100000
449
 
450
#=======================================================================
451
# KEYBOARD_SERIAL_DELAY:
452
# Approximate time in microseconds that it takes one character to
453
# be transfered from the keyboard to controller over the serial path.
454
# Examples:
455
#   keyboard_serial_delay: 200
456
#=======================================================================
457
keyboard_serial_delay: 250
458
 
459
#=======================================================================
460
# KEYBOARD_PASTE_DELAY:
461
# Approximate time in microseconds between attempts to paste
462
# characters to the keyboard controller. This leaves time for the
463
# guest os to deal with the flow of characters.  The ideal setting
464
# depends on how your operating system processes characters.  The
465
# default of 100000 usec (.1 seconds) was chosen because it works 
466
# consistently in Windows.
467
#
468
# If your OS is losing characters during a paste, increase the paste
469
# delay until it stops losing characters.
470
#
471
# Examples:
472
#   keyboard_paste_delay: 100000
473
#=======================================================================
474
keyboard_paste_delay: 100000
475
 
476
#=======================================================================
477
# FLOPPY_COMMAND_DELAY:
478
# Time in microseconds to wait before completing some floppy commands
479
# such as read/write/seek/etc, which normally have a delay associated.
480
# I had this hardwired to 50,000 before.
481
#
482
# Examples:
483
#   floppy_command_delay: 50000
484
#=======================================================================
485
floppy_command_delay: 500
486
 
487
#=======================================================================
488
# MOUSE: 
489
# This option prevents Bochs from creating mouse "events" unless a mouse
490
# is  enabled. The hardware emulation itself is not disabled by this.
491
# You can turn the mouse on by setting enabled to 1, or turn it off by
492
# setting enabled to 0. Unless you have a particular reason for enabling
493
# the mouse by default, it is recommended that you leave it off.
494
# You can also toggle the mouse usage at runtime (middle mouse button on
495
# X11 and SDL, F12 on Win32).
496
#
497
# Examples:
498
#   mouse: enabled=1
499
#   mouse: enabled=0
500
#=======================================================================
501
mouse: enabled=0
502
 
503
#=======================================================================
504
# private_colormap: Request that the GUI create and use it's own
505
#                   non-shared colormap.  This colormap will be used
506
#                   when in the bochs window.  If not enabled, a
507
#                   shared colormap scheme may be used.  Not implemented
508
#                   on all GUI's.
509
#
510
# Examples:
511
#   private_colormap: enabled=1
512
#   private_colormap: enabled=0
513
#=======================================================================
514
private_colormap: enabled=0
515
 
516
#=======================================================================
517
# fullscreen: ONLY IMPLEMENTED ON AMIGA
518
#             Request that Bochs occupy the entire screen instead of a 
519
#             window.
520
#
521
# Examples:
522
#   fullscreen: enabled=0
523
#   fullscreen: enabled=1
524
#=======================================================================
525
#fullscreen: enabled=0
526
#screenmode: name="sample"
527
 
528
#=======================================================================
529
# ne2k: NE2000 compatible ethernet adapter
530
#
531
# Examples:
532
# ne2k: ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
533
#
534
# ioaddr, irq: You probably won't need to change ioaddr and irq, unless there
535
# are IRQ conflicts.
536
#
537
# mac: The MAC address MUST NOT match the address of any machine on the net.
538
# Also, the first byte must be an even number (bit 0 set means a multicast
539
# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
540
# address.  For the ethertap module, you must use fe:fd:00:00:00:01.  There may
541
# be other restrictions too.  To be safe, just use the b0:c4... address.
542
#
543
# ethdev: The ethdev value is the name of the network interface on your host
544
# platform.  On UNIX machines, you can get the name by running ifconfig.  On
545
# Windows machines, you must run niclist to get the name of the ethdev.
546
# Niclist source code is in misc/niclist.c and it is included in Windows 
547
# binary releases.
548
#
549
# script: The script value is optionnal, and is the name of a script that 
550
# is executed after bochs initialize the network interface. You can use 
551
# this script to configure this network interface, or enable masquerading.
552
# This is mainly useful for the tun/tap devices that only exist during
553
# Bochs execution. The network interface name is supplied to the script
554
# as first parameter
555
#=======================================================================
556
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
557
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
558
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
559
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
560
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
561
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=tun0, script=./tunconfig
562
 
563
#=======================================================================
564
# KEYBOARD_MAPPING:
565
# This enables a remap of a physical localized keyboard to a 
566
# virtualized us keyboard, as the PC architecture expects.
567
# If enabled, the keymap file must be specified.
568
# 
569
# Examples:
570
#   keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
571
#=======================================================================
572
keyboard_mapping: enabled=0, map=
573
 
574
#=======================================================================
575
# KEYBOARD_TYPE:
576
# Type of keyboard return by a "identify keyboard" command to the
577
# keyboard controler. It must be one of "xt", "at" or "mf".
578
# Defaults to "mf". It should be ok for almost everybody. A known
579
# exception is french macs, that do have a "at"-like keyboard.
580
#
581
# Examples:
582
#   keyboard_type: mf
583
#=======================================================================
584
#keyboard_type: mf
585
 
586
#=======================================================================
587
# USER_SHORTCUT:
588
# This defines the keyboard shortcut to be sent when you press the "user"
589
# button in the headerbar. The shortcut string can be a combination of
590
# these key names: "alt", "bksp", "ctrl", "del", "esc", "f1", "f4", "tab"
591
# and "win". Up to 3 keys can be pressed at a time.
592
#
593
# Example:
594
#   user_shortcut: keys=ctrlaltdel
595
#=======================================================================
596
#user_shortcut: keys=ctrlaltdel
597
 
598
#=======================================================================
599
# other stuff
600
#=======================================================================
601
#magic_break: enabled=1
602
#cmosimage: cmos.img
603
#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
604
#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
605
#i440fxsupport: enabled=1
606
usb1: enabled=1, ioaddr=0xFF80, irq=10
607
#text_snapshot_check: enable
608
 
609
#=======================================================================
610
# for Macintosh, use the style of pathnames in the following
611
# examples.
612
#
613
# vgaromimage: :bios:VGABIOS-elpin-2.40
614
# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
615
# floppya: 1_44=[fd:], status=inserted
616
#=======================================================================
617
 
618
 
619
#=======================================================================
620
#
621
# The following directives are DEPRECATED 
622
# Please convert them to the new syntax  or remove them
623
#
624
#=======================================================================
625
 
626
#=======================================================================
627
#
628
# The DISKC option is deprecated. Use ATA* options instead.
629
#
630
# DISKC: file=, cyl=, heads=, spt=
631
# Point this at a hard disk image file.  To create 
632
# a hard disk image, try running bximage.  It will help you choose the
633
# size and then suggest a diskc line that works with it.
634
#
635
# In UNIX it may be possible to use a raw device as a Bochs hard disk, 
636
# but WE DON'T RECOMMEND IT.  In Windows there is no easy way.
637
#
638
# Examples:
639
#   diskc: file=10M.sample, cyl=306, heads=4, spt=17
640
#   diskc: file=20M.sample, cyl=615, heads=4, spt=17
641
#   diskc: file=30M.sample, cyl=615, heads=6, spt=17
642
#   diskc: file=46M.sample, cyl=940, heads=6, spt=17
643
#   diskc: file=62M.sample, cyl=940, heads=8, spt=17
644
#   diskc: file=112M.sample, cyl=900, heads=15, spt=17
645
#   diskc: file=483M.sample, cyl=1024, heads=15, spt=63
646
#=======================================================================
647
#diskc: file="30M.sample", cyl=615, heads=6, spt=17
648
 
649
#=======================================================================
650
#
651
# The DISKD option is deprecated. Use ATA* options instead.
652
#
653
# DISKD:
654
# See DISKC above for syntax
655
#
656
# NOTE: diskd and cdromd must not be used together!
657
#=======================================================================
658
#diskd: file="diskd.img", cyl=615, heads=6, spt=17
659
 
660
#=======================================================================
661
#
662
# The CDROMD option is deprecated. Use ATA* options instead.
663
#
664
# CDROMD:
665
#
666
# cdromd: dev=/dev/cdrom, status=inserted
667
# cdromd: dev=/dev/cdrom, status=ejected
668
# cdromd: dev=e:, status=ejected
669
#
670
# In windows, the drive letter + colon notation should be used for cdroms.
671
# Depending on versions of windows and drivers, you may only be able to 
672
# access the "first" cdrom in the system.  On MacOSX, use path="drive"
673
# to access the physical drive.
674
#
675
# NOTE: diskd and cdromd must not be used together!
676
#=======================================================================
677
#cdromd: dev=D:, status=inserted
678
#cdromd: dev=/dev/cdrom, status=inserted
679
#cdromd: dev="drive", status=inserted
680
 
681
#=======================================================================
682
#
683
# The TIME0 directive is DEPRECATED. Use the CLOCK directive instead
684
#
685
# TIME0:
686
# Specifies the start (boot) time of the virtual machine. Use a time 
687
# value as returned by the time(2) system call. If no time0 value is 
688
# set or if time0 equal to 1 (special case), the simulation will be
689
# started at the current time of the host. 
690
#
691
# Examples:
692
#   time0: 1           # Now
693
#   time0: 315529200   # Tue Jan  1 00:00:00 1980
694
#   time0: 631148400   # Mon Jan  1 00:00:00 1990
695
#   time0: 938581955   # Wed Sep 29 07:12:35 1999
696
#   time0: 946681200   # Sat Jan  1 00:00:00 2000
697
#=======================================================================
698
#time0: 938581955
699
 
700
#=======================================================================
701
#
702
# The PIT directive is DEPRECATED. Use the CLOCK directive instead
703
#
704
# PIT:
705
# The PIT is the programmable interval timer.  It has an option that tries to
706
# keep the PIT in sync with real time.  This feature is still experimental,
707
# but it may be useful if you want to prevent Bochs from running too fast, for
708
# example a DOS video game.  Be aware that with the realtime pit option, your
709
# simulation will not be repeatable; this can a problem if you are debugging.
710
#=======================================================================
711
#pit: realtime=1
712
 
713
#=======================================================================
714
# NEWHARDDRIVESUPPORT: enabled=[0|1]
715
# The old harddrive code is not maintened any more.
716
# Default value is enabled=1
717
#=======================================================================
718
#newharddrivesupport: enabled=1
719