Subversion Repositories HelenOS

Rev

Rev 3902 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
34 jermar 1
/*
2701 jermar 2
 * Copyright (c) 2008 Jakub Jermar
34 jermar 3
 * All rights reserved.
4
 *
5
 * Redistribution and use in source and binary forms, with or without
6
 * modification, are permitted provided that the following conditions
7
 * are met:
8
 *
9
 * - Redistributions of source code must retain the above copyright
10
 *   notice, this list of conditions and the following disclaimer.
11
 * - Redistributions in binary form must reproduce the above copyright
12
 *   notice, this list of conditions and the following disclaimer in the
13
 *   documentation and/or other materials provided with the distribution.
14
 * - The name of the author may not be used to endorse or promote products
15
 *   derived from this software without specific prior written permission.
16
 *
17
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
 */
28
 
1888 jermar 29
/** @addtogroup ia32   
1702 cejka 30
 * @{
31
 */
32
/** @file
33
 */
34
 
34 jermar 35
#include <smp/smp.h>
128 jermar 36
#include <arch/smp/smp.h>
37
#include <arch/smp/mps.h>
38
#include <arch/smp/ap.h>
693 decky 39
#include <arch/boot/boot.h>
452 decky 40
#include <genarch/acpi/acpi.h>
41
#include <genarch/acpi/madt.h>
34 jermar 42
#include <config.h>
128 jermar 43
#include <synch/waitq.h>
294 jermar 44
#include <synch/synch.h>
128 jermar 45
#include <arch/pm.h>
46
#include <func.h>
47
#include <panic.h>
48
#include <debug.h>
49
#include <arch/asm.h>
50
#include <mm/frame.h>
51
#include <mm/page.h>
814 palkovsky 52
#include <mm/slab.h>
755 jermar 53
#include <mm/as.h>
195 vana 54
#include <print.h>
55
#include <memstr.h>
1477 decky 56
#include <arch/drivers/i8259.h>
34 jermar 57
 
458 decky 58
#ifdef CONFIG_SMP
34 jermar 59
 
128 jermar 60
static struct smp_config_operations *ops = NULL;
61
 
34 jermar 62
void smp_init(void)
63
{
1780 jermar 64
    uintptr_t l_apic_address, io_apic_address;
1059 jermar 65
 
34 jermar 66
    if (acpi_madt) {
67
        acpi_madt_parse();
129 jermar 68
        ops = &madt_config_operations;
34 jermar 69
    }
128 jermar 70
    if (config.cpu_count == 1) {
34 jermar 71
        mps_init();
128 jermar 72
        ops = &mps_config_operations;
73
    }
131 jermar 74
 
2701 jermar 75
    l_apic_address = (uintptr_t) frame_alloc(ONE_FRAME,
76
        FRAME_ATOMIC | FRAME_KA);
1766 palkovsky 77
    if (!l_apic_address)
3790 svoboda 78
        panic("Cannot allocate address for l_apic.");
1059 jermar 79
 
2701 jermar 80
    io_apic_address = (uintptr_t) frame_alloc(ONE_FRAME,
81
        FRAME_ATOMIC | FRAME_KA);
1766 palkovsky 82
    if (!io_apic_address)
3790 svoboda 83
        panic("Cannot allocate address for io_apic.");
1059 jermar 84
 
277 palkovsky 85
    if (config.cpu_count > 1) {    
2701 jermar 86
        page_mapping_insert(AS_KERNEL, l_apic_address,
87
            (uintptr_t) l_apic, PAGE_NOT_CACHEABLE | PAGE_WRITE);
88
        page_mapping_insert(AS_KERNEL, io_apic_address,
89
            (uintptr_t) io_apic, PAGE_NOT_CACHEABLE | PAGE_WRITE);
1059 jermar 90
 
1780 jermar 91
        l_apic = (uint32_t *) l_apic_address;
92
        io_apic = (uint32_t *) io_apic_address;
2222 decky 93
    }
34 jermar 94
}
95
 
128 jermar 96
/*
97
 * Kernel thread for bringing up application processors. It becomes clear
98
 * that we need an arrangement like this (AP's being initialized by a kernel
99
 * thread), for a thread has its dedicated stack. (The stack used during the
100
 * BSP initialization (prior the very first call to scheduler()) will be used
101
 * as an initialization stack for each AP.)
102
 */
2441 decky 103
void kmp(void *arg __attribute__((unused)))
128 jermar 104
{
2097 decky 105
    unsigned int i;
269 decky 106
 
128 jermar 107
    ASSERT(ops != NULL);
108
 
109
    /*
110
     * We need to access data in frame 0.
111
     * We boldly make use of kernel address space mapping.
112
     */
113
 
114
    /*
115
     * Set the warm-reset vector to the real-mode address of 4K-aligned ap_boot()
116
     */
2701 jermar 117
    *((uint16_t *) (PA2KA(0x467 + 0))) =
118
        (uint16_t) (((uintptr_t) ap_boot) >> 4);    /* segment */
119
    *((uint16_t *) (PA2KA(0x467 + 2))) = 0;     /* offset */
128 jermar 120
 
121
    /*
122
     * Save 0xa to address 0xf of the CMOS RAM.
123
     * BIOS will not do the POST after the INIT signal.
124
     */
3930 jermar 125
    pio_write_8((ioport8_t *)0x70, 0xf);
126
    pio_write_8((ioport8_t *)0x71, 0xa);
128 jermar 127
 
128
    pic_disable_irqs(0xffff);
129
    apic_init();
2441 decky 130
 
131
    uint8_t apic = l_apic_id();
128 jermar 132
 
133
    for (i = 0; i < ops->cpu_count(); i++) {
134
        struct descriptor *gdt_new;
135
 
136
        /*
137
         * Skip processors marked unusable.
138
         */
139
        if (!ops->cpu_enabled(i))
140
            continue;
141
 
142
        /*
143
         * The bootstrap processor is already up.
144
         */
145
        if (ops->cpu_bootstrap(i))
146
            continue;
147
 
2441 decky 148
        if (ops->cpu_apic_id(i) == apic) {
2701 jermar 149
            printf("%s: bad processor entry #%u, will not send IPI "
150
                "to myself\n", __FUNCTION__, i);
128 jermar 151
            continue;
152
        }
153
 
154
        /*
155
         * Prepare new GDT for CPU in question.
156
         */
2701 jermar 157
        gdt_new = (struct descriptor *) malloc(GDT_ITEMS *
3209 jermar 158
            sizeof(struct descriptor), FRAME_ATOMIC | FRAME_LOW_4_GiB);
2701 jermar 159
        if (!gdt_new)
3790 svoboda 160
            panic("Cannot allocate memory for GDT.");
128 jermar 161
 
693 decky 162
        memcpy(gdt_new, gdt, GDT_ITEMS * sizeof(struct descriptor));
3104 svoboda 163
        memsetb(&gdt_new[TSS_DES], sizeof(struct descriptor), 0);
693 decky 164
        protected_ap_gdtr.limit = GDT_ITEMS * sizeof(struct descriptor);
1780 jermar 165
        protected_ap_gdtr.base = KA2PA((uintptr_t) gdt_new);
166
        gdtr.base = (uintptr_t) gdt_new;
128 jermar 167
 
168
        if (l_apic_send_init_ipi(ops->cpu_apic_id(i))) {
169
            /*
298 decky 170
             * There may be just one AP being initialized at
128 jermar 171
             * the time. After it comes completely up, it is
172
             * supposed to wake us up.
298 decky 173
             */
2701 jermar 174
            if (waitq_sleep_timeout(&ap_completion_wq, 1000000,
175
                SYNCH_FLAGS_NONE) == ESYNCH_TIMEOUT) {
176
                unsigned int cpu = (config.cpu_active > i) ?
177
                    config.cpu_active : i;
178
                printf("%s: waiting for cpu%u (APIC ID = %d) "
179
                    "timed out\n", __FUNCTION__, cpu,
180
                    ops->cpu_apic_id(i));
2441 decky 181
            }
298 decky 182
        } else
2701 jermar 183
            printf("INIT IPI for l_apic%d failed\n",
184
                ops->cpu_apic_id(i));
128 jermar 185
    }
186
}
187
 
2101 decky 188
int smp_irq_to_pin(unsigned int irq)
512 jermar 189
{
190
    ASSERT(ops != NULL);
191
    return ops->irq_to_pin(irq);
192
}
193
 
458 decky 194
#endif /* CONFIG_SMP */
1702 cejka 195
 
1888 jermar 196
/** @}
1702 cejka 197
 */