Subversion Repositories HelenOS

Rev

Rev 4075 | Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
3992 mejdrech 1
/*
2
 * Copyright (c) 2009 Lukas Mejdrech
3
 * All rights reserved.
4
 *
5
 * Redistribution and use in source and binary forms, with or without
6
 * modification, are permitted provided that the following conditions
7
 * are met:
8
 *
9
 * - Redistributions of source code must retain the above copyright
10
 *   notice, this list of conditions and the following disclaimer.
11
 * - Redistributions in binary form must reproduce the above copyright
12
 *   notice, this list of conditions and the following disclaimer in the
13
 *   documentation and/or other materials provided with the distribution.
14
 * - The name of the author may not be used to endorse or promote products
15
 *   derived from this software without specific prior written permission.
16
 *
17
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
 */
28
 
29
/** @addtogroup eth
30
 *  @{
31
 */
32
 
33
/** @file
34
 *  Ethernet module implementation.
35
 *  @see eth.h
36
 */
37
 
38
#include <async.h>
39
#include <malloc.h>
40
#include <stdio.h>
41
#include <string.h>
42
 
43
#include <ipc/ipc.h>
44
#include <ipc/services.h>
45
 
46
#include "../../err.h"
47
#include "../../messages.h"
48
#include "../../modules.h"
49
 
50
#include "../../include/byteorder.h"
51
#include "../../include/ethernet_protocols.h"
52
#include "../../include/protocol_map.h"
53
#include "../../netif/device.h"
54
 
55
#include "../../structures/measured_strings.h"
56
#include "../../structures/packet/packet.h"
57
#include "../../structures/packet/packet_client.h"
58
 
59
#include "eth.h"
60
#include "eth_header.h"
61
//#include "eth_messages.h"
62
#include "eth_module.h"
63
 
64
#define ETH_PREFIX      ( sizeof( eth_header_t ) + sizeof( eth_header_lsap_t ) + sizeof( eth_header_snap_t ))
65
#define ETH_SUFFIX      4
66
#define ETH_MAX_CONTENT ( ETH_MIN_PROTO - 1 )
67
#define ETH_MIN_CONTENT 46
68
#define ETH_PADDING     ETH_SUFFIX
69
 
70
/** Returns the device identifier message parameter.
71
 */
72
#define IPC_GET_DEVICE( call )      ( device_id_t ) IPC_GET_ARG1( * call )
73
 
74
/** Returns the packet identifier message parameter.
75
 */
76
#define IPC_GET_PACKET( call )      ( packet_id_t ) IPC_GET_ARG2( * call )
77
 
78
/** Returns the protocol service message parameter.
79
 */
80
#define IPC_GET_PROTO( call )       ( services_t ) IPC_GET_ARG1( * call )
81
 
82
/** Returns the device driver service message parameter.
83
 */
84
#define IPC_GET_SERVICE( call )     ( services_t ) IPC_GET_ARG2( * call )
85
 
86
#define IPC_GET_MTU( call )         ( size_t ) IPC_GET_ARG3( * call )
87
 
88
#define IPC_GET_PHONE( call )       ( int ) IPC_GET_ARG5( * call )
89
 
90
#define IPC_SET_ADDR( answer )      (( size_t * ) & IPC_GET_ARG1( * answer ))
91
#define IPC_SET_PREFIX( answer )    (( size_t * ) & IPC_GET_ARG2( * answer ))
92
#define IPC_SET_CONTENT( answer )   (( size_t * ) & IPC_GET_ARG3( * answer ))
93
#define IPC_SET_SUFFIX( answer )    (( size_t * ) & IPC_GET_ARG4( * answer ))
94
 
95
typedef enum eth_addr_type  eth_addr_type_t;
96
typedef eth_addr_type_t *   eth_addr_type_ref;
97
 
98
enum eth_addr_type{
99
    ETH_LOCAL_ADDR,
100
    ETH_BROADCAST_ADDR
101
};
102
 
103
/** Ethernet global data.
104
 */
105
eth_globals_t   eth_globals;
106
 
107
/** Processes IPC messages from the registered device driver modules in an infinite loop.
108
 *  @param iid The message identifier. Input parameter.
109
 *  @param icall The message parameters. Input/output parameter.
110
 */
111
void    eth_receiver( ipc_callid_t iid, ipc_call_t * icall );
112
 
113
DEVICE_MAP_IMPLEMENT( eth_devices, eth_device_t )
114
 
115
INT_MAP_IMPLEMENT( eth_protos, eth_proto_t )
116
 
117
int eth_device_message( device_id_t device_id, services_t service, size_t mtu );
118
int eth_receive_message( device_id_t device_id, packet_t packet );
119
int eth_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix );
120
int eth_addr_message( device_id_t device_id, eth_addr_type_t type, measured_string_ref * address );
121
int eth_register_message( services_t service, int phone );
122
int eth_send_message( device_id_t device_id, packet_t packet, services_t sender );
123
int eth_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count );
124
void    eth_receiver( ipc_callid_t iid, ipc_call_t * icall );
125
 
126
int eth_initialize( void ){
127
    ERROR_DECLARE;
128
 
129
    rwlock_initialize( & eth_globals.devices_lock );
130
    rwlock_initialize( & eth_globals.protos_lock );
131
    rwlock_write_lock( & eth_globals.devices_lock );
132
    rwlock_write_lock( & eth_globals.protos_lock );
133
    eth_globals.broadcast_addr = measured_string_create_bulk( "\xFF\xFF\xFF\xFF\xFF\xFF", CONVERT_SIZE( uint8_t, char, ETH_ADDR ));
134
    if( ! eth_globals.broadcast_addr ) return ENOMEM;
135
    ERROR_PROPAGATE( eth_devices_initialize( & eth_globals.devices ));
136
    if( ERROR_OCCURRED( eth_protos_initialize( & eth_globals.protos ))){
137
        eth_devices_destroy( & eth_globals.devices );
138
        return ERROR_CODE;
139
    }
140
    rwlock_write_unlock( & eth_globals.protos_lock );
141
    rwlock_write_unlock( & eth_globals.devices_lock );
142
    return EOK;
143
}
144
 
145
int eth_device_message( device_id_t device_id, services_t service, size_t mtu ){
146
    ERROR_DECLARE;
147
 
148
    aid_t           message;
149
    ipc_call_t      answer;
150
    eth_device_ref  device;
151
    int             result;
152
 
153
    rwlock_write_lock( & eth_globals.devices_lock );
154
    // an existing device?
155
    device = eth_devices_find( & eth_globals.devices, device_id );
156
    if( device ){
157
        if( device->service == service ){
158
            // update mtu
159
            device->mtu = mtu;
160
            rwlock_write_unlock( & eth_globals.devices_lock );
161
            return EOK;
162
        }else{
163
            rwlock_write_unlock( & eth_globals.devices_lock );
164
            return EEXIST;
165
        }
166
    }else{
167
        // create a new device
168
        device = ( eth_device_ref ) malloc( sizeof( eth_device_t ));
169
        if( ! device ) return ENOMEM;
170
        device->device_id = device_id;
171
        device->service = service;
172
        device->mtu = mtu;
173
        // bind the device driver
174
        device->phone = bind_service( device->service, device->device_id, SERVICE_ETHERNET, 0, eth_receiver );
175
        // get hardware address
176
        message = async_send_1( device->phone, NET_NETIF_GET_ADDR, device->device_id, & answer );
177
        if( ERROR_OCCURRED( measured_strings_return( device->phone, & device->addr, & device->addr_data, 1 ))){
178
            rwlock_write_unlock( & eth_globals.devices_lock );
179
            free( device );
180
            async_wait_for( message, NULL );
181
            return ERROR_CODE;
182
        }
183
        async_wait_for( message, ( ipcarg_t * ) & result );
184
        if( ERROR_OCCURRED( result )){
185
            rwlock_write_unlock( & eth_globals.devices_lock );
186
            free( device->addr );
187
            free( device->addr_data );
188
            free( device );
189
            return ERROR_CODE;
190
        }
191
        // add to the cache
192
        if( ERROR_OCCURRED( eth_devices_add( & eth_globals.devices, device->device_id, device ))){
193
            rwlock_write_unlock( & eth_globals.devices_lock );
194
            free( device->addr );
195
            free( device->addr_data );
196
            free( device );
197
            return ERROR_CODE;
198
        }
199
    }
200
    rwlock_write_unlock( & eth_globals.devices_lock );
201
    return EOK;
202
}
203
 
204
int eth_receive_message( device_id_t device_id, packet_t packet ){
205
    ERROR_DECLARE;
206
 
207
    eth_header_ex_ref   header;
208
    size_t              length;
209
    int                 type;
210
    eth_proto_ref       proto;
211
    size_t              size;
212
 
213
    length = packet_get_data_length( packet );
214
    if( length <= sizeof( eth_header_t ) + ETH_MIN_CONTENT + ETH_PADDING ) return EINVAL;
215
    // TODO check CRC padding?
216
    header = ( eth_header_ex_ref ) packet_get_data( packet );
217
    type = ntohs( header->header.ethertype );
218
    if( type >= ETH_MIN_PROTO ){
219
        // DIX Ethernet
220
        size = sizeof( eth_header_t );
221
    }else{
222
        // TODO check length?
223
        // translate "LSAP" values
224
        if(( header->lsap.dsap == ETH_RAW ) && ( header->lsap.ssap == ETH_RAW )){
225
            // raw packet
226
            // discard
227
            return EINVAL;
228
        }else if(( header->lsap.dsap == ETH_LSAP_SNAP ) && ( header->lsap.ssap == ETH_LSAP_SNAP )){
229
            // IEEE 802.3 SNAP
230
            // organization code not supported
231
            type = ntohs( header->snap.ethertype );
232
            size = sizeof( eth_header_t ) + sizeof( eth_header_lsap_t) + sizeof( eth_header_snap_t);
233
        }else{
234
            // IEEE 802.3 + 802.2 LSAP
235
            // TODO lsap numbers
236
            type = header->lsap.dsap;
237
            size = sizeof( eth_header_t ) + sizeof( eth_header_lsap_t);
238
        }
239
    }
240
    rwlock_write_lock( & eth_globals.protos_lock );
241
    proto = eth_protos_find( & eth_globals.protos, type );
242
    if( ! proto ){
243
        rwlock_write_unlock( & eth_globals.protos_lock );
244
        return ENOENT;
245
    }
246
    if( ERROR_OCCURRED( packet_set_addr( packet, header->header.src, header->header.dest, ETH_ADDR ))
247
    || ERROR_OCCURRED( packet_trim( packet, size, ETH_PADDING ))){
248
        rwlock_write_unlock( & eth_globals.protos_lock );
249
        return ERROR_CODE;
250
    }
251
    async_msg_2( proto->phone, NET_IL_RECEIVED, device_id, packet_get_id( packet ));
252
    rwlock_write_unlock( & eth_globals.protos_lock );
253
    return EOK;
254
}
255
 
256
int eth_packet_space_message( device_id_t device_id, size_t * addr_len, size_t * prefix, size_t * content, size_t * suffix ){
257
    eth_device_ref  device;
258
 
259
    if( !( addr_len && prefix && content && suffix )) return EINVAL;
260
    rwlock_write_lock( & eth_globals.devices_lock );
261
    device = eth_devices_find( & eth_globals.devices, device_id );
262
    if( ! device ){
263
        rwlock_write_unlock( & eth_globals.devices_lock );
264
        return ENOENT;
265
    }
266
    * content = (  ETH_MAX_CONTENT > device->mtu ) ? device->mtu : ETH_MAX_CONTENT;
267
    rwlock_write_unlock( & eth_globals.devices_lock );
268
    * addr_len = ETH_ADDR;
269
    * prefix = ETH_PREFIX;
270
    * suffix = ETH_SUFFIX;
271
    return EOK;
272
}
273
 
274
int eth_addr_message( device_id_t device_id, eth_addr_type_t type, measured_string_ref * address ){
275
    eth_device_ref  device;
276
 
277
    if( ! address ) return EINVAL;
278
    if( type == ETH_BROADCAST_ADDR ){
279
        * address = eth_globals.broadcast_addr;
280
    }else{
281
        rwlock_write_lock( & eth_globals.devices_lock );
282
        device = eth_devices_find( & eth_globals.devices, device_id );
283
        if( ! device ){
284
            rwlock_write_unlock( & eth_globals.devices_lock );
285
            return ENOENT;
286
        }
287
        * address = device->addr;
288
        rwlock_write_unlock( & eth_globals.devices_lock );
289
    }
290
    return ( * address ) ? EOK : ENOENT;
291
}
292
 
293
int eth_register_message( services_t service, int phone ){
294
    ERROR_DECLARE;
295
 
296
    eth_proto_ref   proto;
297
    int             protocol;
298
 
299
    protocol = protocol_map( SERVICE_ETHERNET, service );
300
    if( ! protocol ) return ENOENT;
301
    rwlock_write_lock( & eth_globals.protos_lock );
302
    proto = eth_protos_find( & eth_globals.protos, protocol );
303
    if( proto ){
304
        proto->phone = phone;
305
        rwlock_write_unlock( & eth_globals.protos_lock );
306
        return EOK;
307
    }else{
308
        proto = ( eth_proto_ref ) malloc( sizeof( eth_proto_t ));
309
        if( ! proto ){
310
            rwlock_write_unlock( & eth_globals.protos_lock );
311
            return ENOMEM;
312
        }
313
        proto->service = service;
314
        proto->protocol = protocol;
315
        proto->phone = phone;
316
        if( ERROR_OCCURRED( eth_protos_add( & eth_globals.protos, protocol, proto ))){
317
            rwlock_write_unlock( & eth_globals.protos_lock );
318
            free( proto );
319
            return ERROR_CODE;
320
        }
321
    }
322
    rwlock_write_unlock( & eth_globals.protos_lock );
323
    return EOK;
324
}
325
 
326
int eth_send_message( device_id_t device_id, packet_t packet, services_t sender ){
327
    ERROR_DECLARE;
328
 
329
    eth_device_ref      device;
330
    eth_header_ex_ref   header;
331
    uint8_t *           src;
332
    uint8_t *           dest;
333
    int                 length;
334
    int                 i;
335
 
336
    header = PACKET_PREFIX( packet, eth_header_ex_t );
337
    if( ! header ) return ENOMEM;
338
    for( i = 0; i < 7; ++ i ) header->header.preamble[ i ] = ETH_PREAMBLE;
339
    header->header.sfd = ETH_SFD;
340
    length = packet_get_addr( packet, & src, & dest );
341
    if( length < 0 ) return length;
342
    if( length < ETH_ADDR ) return EINVAL;
343
    // TODO src set?
344
    // TODO set addresses
345
    length = packet_get_data_length( packet );
346
    if( length > ETH_MAX_CONTENT ) return EINVAL;
347
    if( length < ETH_MIN_CONTENT ){
348
        // TODO pad zeros
349
    }
350
    header->header.ethertype = htons( length );
351
    header->lsap.dsap = 0xAA;
352
    header->lsap.ssap = header->lsap.dsap;
353
    header->lsap.ctrl = 0;
354
    for( i = 0; i < 3; ++ i ) header->snap.proto[ i ] = 0;
355
    header->snap.ethertype = htons( protocol_map( SERVICE_ETHERNET, sender ));
356
    if( ! header ) return ENOENT;
357
    // TODO eth padding
358
    if( ! packet_suffix( packet, ETH_PADDING )){
359
        return ENOMEM;
360
    }
361
 
362
    rwlock_write_lock( & eth_globals.devices_lock );
363
    rwlock_write_unlock( & eth_globals.devices_lock );
364
    return EOK;
365
}
366
 
367
int eth_message( ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count ){
368
    ERROR_DECLARE;
369
 
370
    measured_string_ref address;
371
    packet_t            packet;
372
 
373
    * answer_count = 0;
374
    switch( IPC_GET_METHOD( * call )){
375
        case IPC_M_PHONE_HUNGUP:
376
            return EOK;
377
        case NET_NIL_DEVICE:
378
            return eth_device_message( IPC_GET_DEVICE( call ), IPC_GET_SERVICE( call ), IPC_GET_MTU( call ));
379
        case NET_NIL_SEND:
380
            ERROR_PROPAGATE( packet_translate( eth_globals.networking_phone, & packet, IPC_GET_PACKET( call )));
381
            return eth_send_message( IPC_GET_DEVICE( call ), packet, IPC_GET_SERVICE( call ));
382
        case NET_NIL_PACKET_SPACE:
383
            ERROR_PROPAGATE( eth_packet_space_message( IPC_GET_DEVICE( call ), IPC_SET_ADDR( answer ), IPC_SET_PREFIX( answer ), IPC_SET_CONTENT( answer ), IPC_SET_SUFFIX( answer )));
384
            * answer_count = 3;
385
            return EOK;
386
        case NET_NIL_ADDR:
387
            rwlock_read_lock( & eth_globals.devices_lock );
388
            if( ! ERROR_OCCURRED( eth_addr_message( IPC_GET_DEVICE( call ), ETH_LOCAL_ADDR, & address ))){
389
                 ERROR_CODE = measured_strings_reply( address, 1 );
390
            }
391
            rwlock_read_unlock( & eth_globals.devices_lock );
392
            return ERROR_CODE;
393
        case NET_NIL_BROADCAST_ADDR:
394
            rwlock_read_lock( & eth_globals.devices_lock );
395
            if( ! ERROR_OCCURRED( eth_addr_message( IPC_GET_DEVICE( call ), ETH_BROADCAST_ADDR, & address ))){
396
                 ERROR_CODE = measured_strings_reply( address, 1 );
397
            }
398
            rwlock_read_unlock( & eth_globals.devices_lock );
399
            return ERROR_CODE;
400
        case IPC_M_CONNECT_TO_ME:
401
            return eth_register_message( IPC_GET_PROTO( call ), IPC_GET_PHONE( call ));
402
    }
403
    return ENOTSUP;
404
}
405
 
406
void eth_receiver( ipc_callid_t iid, ipc_call_t * icall ){
407
    ERROR_DECLARE;
408
 
409
    packet_t        packet;
410
 
411
    while( true ){
412
        switch( IPC_GET_METHOD( * icall )){
413
            case NET_NIL_DEVICE_STATE:
414
                //TODO clear device if off?
415
                break;
416
            case NET_NIL_RECEIVED:
417
                if( ! ERROR_OCCURRED( packet_translate( eth_globals.networking_phone, & packet, IPC_GET_PACKET( icall )))){
418
                    ERROR_CODE = eth_receive_message( IPC_GET_DEVICE( icall ), packet );
419
                }
420
                ipc_answer_0( iid, ERROR_CODE );
421
                break;
422
            default:
423
                ipc_answer_0( iid, ENOTSUP );
424
        }
425
        iid = async_get_call( icall );
426
    }
427
}
428
 
429
/** @}
430
 */